- 31 Jan, 2008 40 commits
-
-
Andrew Paprocki authored
This patch adds additional output to the /proc codec#X info. The following pieces of information are added to the output: - Balanced, L/R swap, trigger, impedance sense pin capabilities - Vref pin capabilities - Current Vref pin widget control setting - Default configuration association, sequence, and misc bit test - EAPD/BTL bits conveying balanced mode, EAPD, and L/R swap - Power state modified to show state name as well as setting vs actual value - GPIO parameter output on Audio Function Group, including enumeration of IO pins which are indicated present (Any I and O pins are not output at this time) - Stripe and L/R swap widget capabilities - All digital converter bits: enable, validity, validity config, preemphasis, copyright, non-audio, professional, generation level, and content category - Converter stream and channel values for in/out widgets - SDI select value for in widgets - Unsolicited response widget capability tag and enabled bit - Delay widget capability value - Processing widget capability benign bit and number of coefficients - Realtek Define Registers: processing coefficient, coefficient index [Also, fixed space/tab issues and make codes a bit more readable -- Takashi] Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
The default playback routing must be 0xe4, not 0xe1; the front and surround DACs were exchanged. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Add more symbols for registers and register fields. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Timur Tabi authored
Enable mmap support in the MPC8610 ASoC driver. The driver can use ALSA's default mmap functionality, it was just not enabled previously. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Jiang zhe authored
For codec conexant 5045, I found that the name of 'Capture Source Items' is different from the name of mixer. The mixer is: HDA_CODEC_VOLUME('Ext Mic Playback Volume', 0x17, 0x2, HDA_INPUT), HDA_CODEC_MUTE('Ext Mic Playback Switch', 0x17, 0x2, HDA_INPUT), But the capture source item is : static struct hda_input_mux cxt5045_capture_source = { .num_items = 2, .items = { { 'IntMic', 0x1 }, { 'LineIn', 0x2 }, } }; I think that it's better to change the name of capture_source to avoid misunderstanding. Signed-off-by: Jiang zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Jiang Zhe authored
The benq r55e laptop have 3 jacks on the front panel. One for HP, one for Line In and one for Mic In. This patch implemented a new model to support it. Signed-off-by: Jiang Zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Added the description of the model fujitsu for Cx5045 codec chip. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Julian Scheel authored
Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Konstantin Kletschke <konsti@ku-gbr.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Add proper register bit symbols for the I2S format field, and allow card models to configure the I2S format to be used for the DACs and ADCs. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Jaroslav Kysela authored
See ALSA bug#1846 for more details. Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Julian Scheel authored
See ALSA bug#2384 for more details. Signed-off-by: Julian Scheel <julian@jusst.de> Signed-off-by: Konstantin Kletschke <konsti@ku-gbr.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Vasily Khoruzhick authored
Codec with id 11c1:1040 sitting on hda bus isn't si3054-compatible. It should be removed from patch_si3054.c id list. The detailed information http://archives.linmodems.org/26457 From: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Some machines with STAC codecs seem to have problems (e.g. no audible playback) when the delay in codec-read routine is too short. I still don't figure out which command sequence causes this problem (due to lack of test hardware), but it's known that increasing the delay fixes. So, added a stupid workaround here temporarily... Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Andreas Degert authored
This device has io_type == 1 (Multiface) and firmware_rev > 0xa (fixes regression from changeset 5326) Signed-off-by: Andreas Degert <ad@papyrus-gmbh.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
T. H. Huth authored
This patch provides the snd-powermac sound driver with the ability to handle dead DMA transfers. If a dead DMA transfer is detected, the driver now sets up a new DMA transfer to continue with the sound output at the point where the old transfer died. This dead DMA transfer handling has become necessary with recent kernels on certain G4 PowerMacs. Please refer to the following URLs for more information: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3126 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/87652 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=436723 The patch is based on the dead DMA transfer handling code from the old dmasound driver which can be found in the file sound/oss/dmasound/dmasound_awacs.c in the Linux source code. Signed-off-by: T. H. Huth <th.huth@googlemail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Randy Dunlap authored
Fix section mismatch in caiaq: these __devinit functions can be called at any time so they should not be __devinit. WARNING: vmlinux.o(.text+0x10a8dae): Section mismatch: reference to .init.text:snd_usb_caiaq_audio_init (between 'setup_card' and 'create_card') WARNING: vmlinux.o(.text+0x10a8dd6): Section mismatch: reference to .init.text:snd_usb_caiaq_midi_init (between 'setup_card' and 'create_card') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Randy Dunlap authored
Fix section mismatch in hdsp: snd_hdsp_proc_init() can be called from an ioctl at any time. WARNING: vmlinux.o(.text+0x1089bc2): Section mismatch: reference to .init.text: (between 'snd_hdsp_create_alsa_devices' and 'snd_hdsp_free') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Randy Dunlap authored
Fix section mismatch in atiixp by making some functions __devinit. WARNING: vmlinux.o(.text+0xfd9304): Section mismatch: reference to .init.data:atiixp_quirks (between 'ac97_probing_bugs' and 'snd_atiixp_codec_detect') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Randy Dunlap authored
Fix section mismatch in ad1889 by renaming the pci_driver variable to a whitelisted variable name. WARNING: vmlinux.o(.data+0x2e5ff0): Section mismatch: reference to .init.text:snd_ad1889_probe (between 'ad1889_pci' and 'index') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Randy Dunlap authored
Fix section mismatches in mts64 by making a static variable __devinitdata. WARNING: vmlinux.o(.data+0x2e33f0): Section mismatch: reference to .init.data:mts64_ctl_smpte_switch (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e33f8): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_hours (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e3400): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_minutes (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e3408): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_seconds (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e3410): Section mismatch: reference to .init.data:mts64_ctl_smpte_time_frames (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') WARNING: vmlinux.o(.data+0x2e3418): Section mismatch: reference to .init.data:mts64_ctl_smpte_fps (between 'control.19929' and 'snd_mts64_rawmidi_output_ops') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Add a callback to the model structure to allow modification of the hardware PCM limits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Allow the models to modify mixer controls before they are added to the card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Allow the card models to specify whether each of the hardware DMA channels is used. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Add a field to the model structure so that it is possible to have a card where the SPI outputs 4 and 5 are used for an EEPROM. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Only initialize and create mixer controls for the first AC97 codec when one has actually been detected. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Enable the SPDIF input-pin on VIA codecs when SPDIF-input is enabled by BIOS. Also, including a bit code clean up. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Added the support of Dell OEM laptops (Vostro 1200) with ALC268 codec. The new model=dell is provided. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
It turned out that the PCBEEP element (0x1d) is disabled on some hardwares although it's defined in the datasheet. Because of the error at info of this element, the mixer gets totally unusable. Since the PCBEEP isn't that important feature, it's safer to disable this. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
There are two similar GPIO-enablement codes in patch_sigmatel.c. Let's clean up. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Tobin Davis authored
This patch removes hardcoded values for the number of streams supported by the southbridge in most chipsets, and reads these values from the chipset directly. Most systems are hardwired for 4 streams in each direction, but newer chipsets change that capability. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Rename the 'PCM Playback Volume'/'Switch' mixer controls to 'Master'. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Krzysztof Helt authored
This busy_wait is not needed after latest changes to the cs4231-lib Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
The line input cannot be mixed with the other inputs, so we have to mute the other input switches when it is selected. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Use an array for the pointers to known controls so that it is easier to add more. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clemens Ladisch authored
Do not exchange the surround and back jacks except when in 7.1 mode where the surround jack is not rear but side. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Miguel Boton authored
'snd_shutdown_f_ops' is not a pointer so its address will never be NULL. GCC will complain because 'fops_get' will do an unnecessary check because '&snd_shutdown_f_ops' is always true. Signed-off-by: Miguel Boton <mboton@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Removed 'FIXME' comments that have been already fixed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Claudio Matsuoka authored
This patch fixes 5.1 surround output and headphone detection in the Dell Inspiron 530 and possibly other Dell systems using the ALC888 codec (mode 6stack-dell). Signed-off-by: Claudio Matsuoka <cmatsuoka@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Andrew Paprocki authored
Fixes multiple device support by incrementing the static device counter at the end of the azx_probe() call. Without this, subsequent probes would always use the index specified for the first card. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Timur Tabi authored
Add the ASoC drivers for the Freescale MPC8610 SoC and the MPC8610 HPCD reference board. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-