- 01 Dec, 2007 5 commits
-
-
Carlos Eduardo Aguiar authored
Make board-sx1.c file uses new board-sx1-mmc.c code. This patch also: - Introduces a new gpio_switch to get events when inserting and removing MMC/SD/SDIO cards to/from the slot. - Enables the GPIO switch support option on sx1_defconfig to use multislot support: Signed-off-by:
Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by:
Tony Lindgren <tony@atomide.com>
-
Carlos Eduardo Aguiar authored
Proposes the new board-sx1-mmc.c file to handle all the MMC specific code for multislot support. Signed-off-by:
-
Carlos Eduardo Aguiar authored
This patch redefines CN_IDX_SX1SND and CN_VAL_SX1SND macros at include/linux/connector.h. It is based on Komal Shah' earlier patch. Signed-off-by:
-
Kyungmin Park authored
OMAP_GPIO_SIWTCH is optional, so omap_reister_gpio_switches will be null. Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Kyungmin Park authored
If the get_cover_state is not set, it occurs the oops. Signed-off-by:
-
- 30 Nov, 2007 4 commits
-
-
Tony Lindgren authored
Misc minor clean-up for upstream merge Signed-off-by: -
Tony Lindgren authored
Clean up memory allocation return values Signed-off-by: -
Tony Lindgren authored
Move dspgateway to drivers/dsp/dspgateway Signed-off-by: -
Tony Lindgren authored
Remove arch-arm/plat-omap/dsp/dsp_common.h, and move definitions to include/asm-arm/arch-omap/dsp_common.h. This is done in order to prepare dsp for moving to live under drivers. No functional changes. Signed-off-by:
-
- 28 Nov, 2007 31 commits
-
-
Tony Lindgren authored
Merge branches 'master' and 'linus'
-
sshahrom@micron.com authored
Add support for 2k Page nand with Enabled HW ECC on omap2430 v4.0. and v5. It has been Tested with Micron Nand. Signed-off-by: Shahrom Sharif-Kashani <sshahrom <at> micron.com> Signed-off-by: -
sshahrom@micron.com authored
Add support for 2k Page nand with Enabled HW ECC on omap2430 v4.0. and v5. It has been Tested with Micron Nand. Signed-off-by:
Shahrom Sharif-Kashani <sshahrom@micron.com> Moved defines from nand.h to omap2.c, cleaned up spacing and comments a bit. Signed-off-by:
-
David Brownell authored
Build fixes for the tsc210x driver. Signed-off-by:David Brownell <dbrownell@users.sourceforge.net>
-
David Brownell authored
Fix init section warnings in the new i2c init code. It's wrong to call "__init" functions from non-__init ones. Signed-off-by:
Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by:
-
Carlos Eduardo Aguiar authored
Enables MMC/SD card support option on n800_defconfig to use MMC multislot support. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2Linus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2: ocfs2: reverse inline-data truncate args ocfs2: Fix comparison in ocfs2_size_fits_inline_data() ocfs2: Remove bug statement in ocfs2_dentry_iput() [PATCH] ocfs2: Remove expensive bitmap scanning ocfs2: log valid inode # on bad inode ocfs2: Filter -ENOSPC in mlog_errno() [PATCH] fs/ocfs2: Add missing "space" ocfs2: Reset journal parameters after s_mount_opt update
-
git://www.linux-m32r.org/git/takata/linux-2.6_devLinus Torvalds authored
* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev: m32r: Update sys_rt_sigsuspend m32r: Ignore warnings for unused syscalls m32r: Add missing syscalls
-
Eduardo Valentin authored
Removing duplicated and unused files from camera driver for omap1. Signed-off-by:
Eduardo Valentin <eduardo.valentin@indt.org.br> Signed-off-by:
-
Eduardo Valentin authored
camera_device_unregister expected the argument to be its own device structure but it's actually that of its slave. Also get master from slave's structure in camera_device_register. Signed-off-by:
-
Eduardo Valentin authored
This patch updates the camera_core.[c,h] to use corretly the new v4l2 videobuf API. Also removes VIDEO_BUF reference from Kconfig and adds the correct dependencies. Signed-off-by:
-
Lauri Leukkunen authored
This patch should be dropped once the official machine type is available in the tree. Signed-off-by:
Lauri Leukkunen <lauri.leukkunen@nokia.com> Signed-off-by:
-
Lauri Leukkunen authored
Enable N810 and lzo support for jffs2. Signed-off-by:
-
Lauri Leukkunen authored
Built alongside N800 sharing most of the init code through board-n800.h. Bootloader tag array size is increased from 512 to 1024. Many drivers are still missing or don't work correctly, but at least serial console is functional and jffs2 works with lzo compression. Signed-off-by:
-
Tony Lindgren authored
Fixes to make host features work again Signed-off-by: -
Felipe Balbi authored
Make board-h2.c file uses new board-h2-mmc.c code. This patch also: - Introduces a new gpio_switch to get events when inserting and removing MMC/SD/SDIO cards to/from the slot. - Enables the following options on omap_h2_1610_defconfig to use multislot support: - GPIO switch support - MMC/SD card support - VFAT fs support - NLS ISO 8859-1 Signed-off-by:
Felipe Balbi <felipe.lima@indt.org.br> Signed-off-by:
Anderson Briglia <anderson.briglia@indt.org.br> Signed-off-by:
David Cohen <david.cohen@indt.org.br> Signed-off-by:
-
Felipe Balbi authored
Proposes the new board-h2-mmc.c file to handle all the mmc specific code for multislot support. Signed-off-by:
-
Felipe Balbi authored
Make board-h3.c file uses new board-h3-mmc.c code. This patch also: - Introduces a new gpio_switch to get events when inserting and removing MMC/SD/SDIO cards to/from the slot. - Enables the following options on omap_h3_1710_defconfig to use multislot support: - GPIO switch support - MSDOS fs support - VFAT fs support - Codepage 437 - NLS ISO 8859-1 Signed-off-by:
-
Felipe Balbi authored
Proposes the new board-h3-mmc.c file to handle all the mmc specific code for multislot support. Signed-off-by:
-
Carlos Eduardo Aguiar authored
Enables MMC/SD card support option on n800_defconfig to use MMC multislot support. Signed-off-by:
-
Jarkko Lavinen authored
Modifications at board-n800-mmc.c and board-n800.c files to work with MMC multislot support. Signed-off-by:
Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by:
Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by:
-
Carlos Eduardo Aguiar authored
Modifications at arch/arm/plat-omap/devices.c and include/asm-arm/arch-omap/mmc.h to use multislot structures. Signed-off-by:
-
Carlos Eduardo Aguiar authored
Using setup_timer() instead of init_timer on omap.c file. Signed-off-by:
-
Jarkko Lavinen authored
When a card is removed while it is being accessed, a command can get stuck so that no timeout or end of command interrupt ever occurs. The command getting stuck is almost always CDM12, but also the other commands can get stuck. Catch a stuck command with a timer and try sending the initiliazation stream until the controller starts running again and responds with the end of command status. Signed-off-by:
-
Juha Yrjola authored
General code cleanup, modifications at some dev_* functions and other hacks at mmc_omap_irq() for MMC multislot support. Signed-off-by:
-
Juha Yrjola authored
Modifications at power functions to MMC multislot support. This patch also move board-specific code out of MMC OMAP driver. Signed-off-by:
-
Juha Yrjola authored
Fix the data timeout calculation for MMC multislot support. Signed-off-by:
-
Juha Yrjola authored
New functions to support MMC multislot: mmc_omap_release_dma() and mmc_omap_abort_xfer(). Signed-off-by:
-
Juha Yrjola Juha Yrjola authored
This patch adds back MMC cover switch support in a way that supports multiple slots. Signed-off-by:
-
Juha Yrjola authored
Introduce new MMC multislot structure and change driver to use it. Note that MMC clocking is now enabled in mmc_omap_select_slot() and disabled in mmc_omap_release_slot(). Signed-off-by:
-
Tony Lindgren authored
This patch removes the MMC cover switch handling temporarily to make following multislot patches cleaner. MMC cover switch handling will be added back in later patches after adding basic multislot support. Signed-off-by:
-
