- 28 Jan, 2008 40 commits
-
-
Gerrit Renker authored
This replaces 4 individual assignments for `len' with a single one, placed where the control flow of those 4 leads to. Signed-off-by:
Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gerrit Renker authored
This adds a socket option and signalling support for the case where the server holds timewait state on closing the connection, as described in RFC 4340, 8.3. Since holding timewait state at the server is the non-usual case, it is enabled via a socket option. Documentation for this socket option has been added. The setsockopt statement has been made resilient against different possible cases of expressing boolean `true' values using a suggestion by Ian McDonald. Signed-off-by:
-
Gerrit Renker authored
This removes another Fixme, using the TCP maximum RTO rather than the value specified by the DCCP specification. Across the sections in RFC 4340, 64 seconds is consistently suggested as maximum RTO backoff value; and this is the value which is now used. I have checked both termination cases for retransmissions of Close/CloseReq: with the default value 15 of `retries2', and an initial icsk_retransmit = 0, it takes about 614 seconds to declare a non-responding peer as dead, after which the final terminating Reset is sent. With the TCP maximum RTO value of 120 seconds it takes (as might be expected) almost twice as long, about 23 minutes. Signed-off-by:
-
Gerrit Renker authored
When performing active close, RFC 4340, 8.3. requires to retransmit the Close/CloseReq with a backoff-retransmit timer starting at intially 2 RTTs. This patch shifts the existing code for active-close retransmit timer into output.c, so that the retransmit timer is started when the first Close/CloseReq is sent. Previously, the timer was started when, after releasing the socket in dccp_close(), the actively-closing side had not yet reached the CLOSED/TIMEWAIT state. The patch further reduces the initial timeout from 3 seconds to the required 2 RTTs, where - in absence of a known RTT - the fallback value specified in RFC 4340, 3.4 is used. Signed-off-by:
-
Daniel Lezcano authored
Removed useless and buggy __exit section in the different ipv6 subsystems. Otherwise they will be called inside an init section during rollbacking in case of an error in the protocol initialization. Signed-off-by:
Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by:
-
Gerrit Renker authored
This patch performs two changes: 1) Close the write-end in addition to the read-end when a fin-like segment (Close or CloseReq) is received by DCCP. This accounts for the fact that DCCP, in contrast to TCP, does not have a half-close. RFC 4340 says in this respect that when a fin-like segment has been sent there is no guarantee at all that any further data will be processed. Thus this patch performs SHUT_WR in addition to the SHUT_RD when a fin-like segment is encountered. 2) Minor change: I noted that code appears twice in different places and think it makes sense to put this into a self-contained function (dccp_enqueue()). Signed-off-by:
-
Herbert Xu authored
My previous patch made the wait flag take the opposite value to what it should be. This patch fixes that. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
The caller must hold the RTNL so let's check it in unregister_netdevice. Signed-off-by:
-
Herbert Xu authored
This fixes a logical error in ICMP policy checks which lets packets through if the state ICMP flag is off. Signed-off-by:
-
Herbert Xu authored
This patch converts all callers of xfrm_lookup that used an explicit value of 1 to indiciate blocking to use the new flag XFRM_LOOKUP_WAIT. Signed-off-by:
-
Herbert Xu authored
The policy check I added for ICMP on IPv6 is reversed. This patch fixes that. It also adds an skb->sp check so that unprotected packets that fail the policy check do not crash the machine. Signed-off-by:
-
Michael Chan authored
Change bnx2_init_napi() to void. Warning was noted by DaveM. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Michael Chan authored
Signed-off-by:
-
Michael Chan authored
Enable new tx ring and add new MSIX handler and NAPI poll function for the new tx ring. Enable MSIX when the hardware supports it. Signed-off-by:
-
Michael Chan authored
To separate TX IRQs into a different MSIX vector, we need to support a new tx ring. The original tx ring will still be used when not using MSIX. Signed-off-by:
-
Michael Chan authored
Change bnx2_napi struct into an array and add code to manage multiple IRQs. MSIX hardware structures and new registers are also added. Signed-off-by:
-
Michael Chan authored
Rx related fields used in NAPI polling are moved from the main bnx2 struct to the bnx2_napi struct. Signed-off-by:
-
Michael Chan authored
Tx related fields used in NAPI polling are moved from the main bnx2 struct to the bnx2_napi struct. Signed-off-by:
-
Michael Chan authored
Introduce a bnx2_napi structure that will hold a napi_struct and other fields to handle NAPI polling for the napi_struct. Various tx and rx indexes and status block pointers will be moved from the main bnx2 structure to this bnx2_napi structure. Most NAPI path functions are modified to be passed this bnx2_napi struct pointer. Signed-off-by:
-
Michael Chan authored
Add a table to keep track of multiple IRQs and restructure the IRQ request and free functions so that they can be easily expanded to handle multiple IRQs. Signed-off-by:
-
Michael Chan authored
This makes the code cleaner and easier to support different tx rings. Signed-off-by:
-
Michael Chan authored
Signed-off-by:
-
Michael Chan authored
If the MTU requires more than 1 page for the SKB, enable the page ring and calculate the size of the page ring. This will guarantee order-0 allocation regardless of the MTU size. Fixup loopback test packet size so that we don't deal with the pages during loopback test. Signed-off-by:
-
Michael Chan authored
Add function to reuse a page in case of allocation or other errors. Add code to construct the completed SKB with the additional data in the pages. Signed-off-by:
-
Michael Chan authored
Add new fields to keep track of the pages and the page rings. Add functions to allocate and free pages. Signed-off-by:
-
Michael Chan authored
Signed-off-by:
-
Michael Chan authored
Factor out the common functions that will be used to initialize the normal RX rings and the page rings. Change the copybreak constant RX_COPY_THRESH to 128. This same constant will be used for the max. size of the linear SKB when pages are used. Copybreak will be turned off when pages are used. Signed-off-by:
-
Michael Chan authored
Add a new function to handle new SKB allocation and to prepare the completed SKB. This makes it easier to add support for non-linear SKB. Signed-off-by:
-
Michael Chan authored
Define the various ring constants to make the code cleaner. Signed-off-by:
-
Andrew Morton authored
Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Michal Schmidt authored
Once created, an IP tunnel can't be bound to another device. (reported as https://bugzilla.redhat.com/show_bug.cgi?id=419671) To reproduce: # create a tunnel: ip tunnel add tunneltest0 mode ipip remote 10.0.0.1 dev eth0 # try to change the bounding device from eth0 to eth1: ip tunnel change tunneltest0 dev eth1 # show the result: ip tunnel show tunneltest0 tunneltest0: ip/ip remote 10.0.0.1 local any dev eth0 ttl inherit Notice the bound device has not changed from eth0 to eth1. This patch fixes it. When changing the binding, it also recalculates the MTU according to the new bound device's MTU. If the change is acceptable, I'll do the same for GRE and SIT tunnels. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Signed-off-by:
-
Pavel Emelyanov authored
The LOOPBACK_OVERHEAD is not used in this file at all. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Signed-off-by:
-
Denis V. Lunev authored
Signed-off-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
-
Harvey Harrison authored
X86_32 was the last user of the FASTCALL macro, now that it uses regparm(3) by default, this macro expands to nothing. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Herbert Xu authored
RFC 4301 requires us to relookup ICMP traffic that does not match any policies using the reverse of its payload. This patch implements this for ICMP traffic that originates from or terminates on localhost. This is activated on outbound with the new policy flag XFRM_POLICY_ICMP, and on inbound by the new state flag XFRM_STATE_ICMP. On inbound the policy check is now performed by the ICMP protocol so that it can repeat the policy check where necessary. Signed-off-by:
-
Herbert Xu authored
RFC 4301 requires us to relookup ICMP traffic that does not match any policies using the reverse of its payload. This patch adds the functions xfrm_decode_session_reverse and xfrmX_policy_check_reverse so we can get the reverse flow to perform such a lookup. Signed-off-by:
-
Herbert Xu authored
This patch introduces an enum for bits in the flags argument of xfrm_lookup. This is so that we can cram more information into it later. Since all current users use just the values 0 and 1, XFRM_LOOKUP_WAIT has been added with the value 1 << 0 to represent the current meaning of flags. The test in __xfrm_lookup has been changed accordingly. Signed-off-by:
-
Gerrit Renker authored
Signed-off-by:
-
Gerrit Renker authored
This hooks up the TFRC Loss Interval database with CCID 3 packet reception. In addition, it makes the CCID-specific computation of the first loss interval (which requires access to all the guts of CCID3) local to ccid3.c. The patch also fixes an omission in the DCCP code, that of a default / fallback RTT value (defined in section 3.4 of RFC 4340 as 0.2 sec); while at it, the upper bound of 4 seconds for an RTT sample has been reduced to match the initial TCP RTO value of 3 seconds from[RFC 1122, 4.2.3.1]. Signed-off-by:
-
Gerrit Renker authored
This moves two inlines back to packet_history.h: these are not private to packet_history.c, but are needed by CCID3/4 to detect whether a new loss is indicated, or whether a loss is already pending. Signed-off-by:
-
