- 10 Dec, 2006 40 commits
-
-
Mauro Carvalho Chehab authored
This patch adds usbvision into V4L/DVB HG tree. Usbvision driver is a GPL driver, made by: Joerg Heckenbach <joerg@heckenbach-aw.de> and Dwaine Garden <DwaineGarden@rogers.com> V4L2 migration made by: Thierry Merle <thierry.merle@free.fr> Kconfig/Makefile scripts by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
Joerg Heckenbach <joerg@heckenbach-aw.de> Signed-off-by:
Dwaine Garden <dwainegarden@rogers.com> Signed-off-by:
Thierry Merle <thierry.merle@free.fr> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Birr authored
Remove bogus read during MC1 programming. A '1' bit could never be cleared using the old code. Use MASK_xx macros. Signed-off-by:
Hartmut Birr <e9hack@gmail.com> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Hartmut Birr authored
Use SAA7146_IER_ENABLE/DISABLE to enable or disable a hardware interrupt. Signed-off-by:
-
Hartmut Birr authored
Added a delay to give the frontend a little bit time for power-on. Signed-off-by:
Hartmut Birr <e9hack@googlemail.com> Signed-off-by:
-
Oliver Endriss authored
Convert SAA7146_IER_{DIS,EN}ABLE macros to inline functions. Fixes a problem with macro expansion (reported by C.Y.M). Signed-off-by: -
Oliver Endriss authored
Use interrupt mode for I2C transfers. Signed-off-by:
-
Hartmut Birr authored
Add a timeout to the wait for the i2c-interrupt. The timeout prevents from endless waiting if the interrupt gets lost. Signed-off-by:
-
Hartmut Birr authored
Protect the access to the IER register of the SAA7146 by the device spinlock. I2C transfers may use interrupt mode now. Signed-off-by:
-
Hans Verkuil authored
The TUNER_LG_NTSC_TAPE is identical in all respects to the TUNER_PHILIPS_FM1236_MK3. So use the params struct for the Philips tuner. Also add this LG_NTSC_TAPE tuner to the switches where radio specific parameters are set so it behaves like a TUNER_PHILIPS_FM1236_MK3. This change fixes the radio support for this tuner (the wrong bandswitch byte was used). Thanks to Andy Walls <cwalls@radix.net> for finding this bug. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Jonathan Corbet authored
Add s/g_parm support allowing applications to tweak the frame rate. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Jonathan Corbet authored
Remove RGB32, useful for debugging, but with no place in production. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Thomas Genty authored
This patch adds support for the remote control bundled with the Hauppauge HVR1110 Signed-off-by:
Thomas Genty <tomlohave@gmail.com> Signed-off-by:
Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
The vendor IDs in this file were all in alphabetical order except for this one. Signed-off-by:
-
Michael Hunold authored
Signed-off-by:
Michael Hunold <hunold@linuxtv.org> Signed-off-by:
-
Michael Hunold authored
Change order of module requests, so that tuner module is loaded at the end, because the tuner module probes multiple i2c addresses and might grab an i2c address that is not a tuner but something else. Signed-off-by:
-
Andrew Morton authored
drivers/media/dvb/ttpci/budget-ci.c:220:6: warning: "LINUX_VERSION_CODE" is not defined drivers/media/dvb/ttpci/budget-ci.c:220:28: warning: "KERNEL_VERSION" is not defined drivers/media/dvb/ttpci/budget-ci.c:220:42: error: missing binary operator before token "(" Signed-off-by:Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
In some cases when using VSB, the AGC status register has been known to falsely report "no signal" when in fact there is a carrier lock. The datasheet labels these status flags as QAM only, yet the lgdt330x module is using these flags for both QAM and VSB. This patch allows for the carrier recovery lock status register to be tested, even if the agc signal status register falsely reports no signal. Thanks to jcrews from #linuxtv in irc, for initially reporting this bug. Signed-off-by:
-
Adrian Bunk authored
The VIDEO_ZR36120 driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Acked-by:
-
Hans Verkuil authored
Remove coding style inconsistencies. Signed-off-by:
-
Andrew de Quincey authored
This caused compilation to fail - completely replaced by new style functions, so can be removed. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Thomas Kaiser authored
If your device is using the philips tda1316 tuner, i think there is a problem in setting the correct Band. 162 MHz and above should be band 2 (Mid-Band). But in dvbc_philips_tdm1316l_tuner_set_params band 1 is set for frequencies below 200 MHz. Signed-off-by:
Thomas Kaiser <linux-dvb@kaiser-linux.li> Signed-off-by:
-
David Hardeman authored
Change the debounce logic so that it is not used at all unless the debounce parameter has been set. This makes for a much "snappier" remote for most users as there is no timeout to wait for (the debounce logic has a 350ms timer for the next repeat, but with the RC5 protocol, one event per ~110ms is possible) Signed-off-by:
David Hardeman <david@hardeman.nu> Signed-off-by:
-
David Hardeman authored
This adds a ir_debug parameter which is useful in tracking down IR decoding problems. Based on Darren Salt's dvb-ir patchset. Signed-off-by:
Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by:
-
David Hardeman authored
Decode the RC5 device byte as well as the command byte. Introduce a parameter to set the device events to listen for. Default to try to auto-detect the proper device code, otherwise, listen to any device as the old code did. Based on Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
This converts the budget-ci driver so that it uses ir-common for some of its IR processing. In particular, the keymap for the Nova-T (sub 13c2:1011) is switched to the Hauppauge grey/black keymap, of which the keys on the supplied R808 remote control form a subset. The old budget-ci keymap is moved to ir-keymaps.c and is used for other remotes. The debounce logic for buggy remotes (i.e. Zenith) is made conditional the new debounce parameter and defaults to off (so that repeat keypresses aren't ignored for all working remotes). Some parts are based on Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
Trivial change to help the user understand what went wrong. Taken from Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
Improve the error checking in the IR init and deinit functions. Based on Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
This patch adds a 'phys' string, of the same form as used by various other DVB cards' IR drivers, for access by any program which uses the EVIOCPHYS ioctl or may read /sys/class/input/*/phys (e.g. udev) to identify input device nodes. Taken from Darren Salt's dvb-ir patchset. Signed-off-by:
-
David Hardeman authored
This patch lays down some groundwork for later budget-ci patches. The bulk of this consists of moving a few members into a new struct and renaming a few of them. It also allocates extra space for the device name (the "name" field in /proc/bus/input/devices and in the relevant sysfs dir) to avoid truncation and uses snprintf rather than sprintf in case the extra space shouldn't be enough. Taken from Darren Salt's dvb-ir patchset Signed-off-by:
-
Hartmut Hackmann authored
The change does the following: - At device open, it sets the recording source to the current input instead of LINE2. So it is no longer necessary to set the recording source with a mixer application. - Connects the mixer volume control to the input sensitivity selection of the analog sound inputs. This allows only one 6db step. Signed-off-by:
Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Michael Krufky authored
Use return value of dvb_pll_configure() to fill priv->frequency In lgh06xf_set_params: Rename int variable "err" to "result". Remove needless calculation of the set frequency, since this value is now being returned by dvb_pll_configure(). Signed-off-by:
-
Michael Krufky authored
This patch removes some duplicated code by returning the frequency set by dvb_pll_configure(), instead of recalculating it again in dvb_pll_set_params() and dvb_pll_calc_regs(). If the return value of dvb_pll_configure is less than zero, it is an error code. Otherwise, the return value is the frequency actually set by the function. Signed-off-by:
-
Michael Krufky authored
- adhere to 80-column limit - replace some spaces with tabs Signed-off-by:
-
Patrick Boettcher authored
Adding support for Pinnacle PCTV 400e DVB-S. The module name is called ttusb2, because it this device (and other Pinnacle devices) is using the USB-protocol originally used by Technotrend device. I'm suspecting Technotrend as the device-designer. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
Added a dump I2C message to the TDA826x-driver to fix I2C read for identification with ttusb2-driver. Signed-off-by:
-
audetto@tiscali.it authored
Signed-off-by:
Andrea A Odetti <audetto@tiscali.it> Signed-off-by:
-
Mauro Carvalho Chehab authored
video_ioctl2 will auto-generate standard entries at ENUM_FMT. Also, now, a driver may return a subset of the video array at the return, to be stored as the current_norm. For example, a driver may ask for V4L2_STD_PAL. At return, driver may change it to V4L2_STD_PAL_B. This way, a futher call to G_STD will return the exact detected video std. Signed-off-by:
-
