Remove left overs from the generic declared coherent rework.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add support for dynamic crash kernel base address.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Improve Migo-R ethernet performance by reducing smc91x overruns.
This is done by enabling SMC91X_NOWAIT and optimizing CS4 setup.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Conflicts:

	Documentation/kernel-parameters.txt
	arch/sh/include/asm/elf.h

debugfs_create_file() returns NULL if an error occurs, returns -ENODEV
when debugfs is not enabled in the kernel.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

debugfs_create_dir() returns NULL if an error occurs, returns -ENODEV
when debugfs is not enabled in the kernel.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Renesas AP325RXA board has Epson RX-8564LC of RTC.
This patch supports RTC of this board.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch hooks up the magicpanelr2 board with the sh7720 pinmux code.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds pinmux and gpio support for the sh7720 processor.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Make the rsk7203 board use the newly added sh7203 pinmux code.
Only a single LED plus the serial console pins for now.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds pinmux and gpio support for the sh7203 processor.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch enables the GPIO code on AP325RXA and converts the code from
register based pinmux configuration to GPIO based pin by pin setup.
While at it 2 LEDs and one switch are added and exported to user space.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds pinmux and gpio support for the sh7723 processor.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch enables the GPIO code on Migo-R and converts the code from
register based pinmux configuration to GPIO based pin by pin setup.
Fix whitespace damage while at it and add 2 LEDs and export them to
user space.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds pinmux and gpio support for the sh7722 processor.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch adds gpio code together with the pinmux table parser.
In the future we should optimize this and switch back to gpiolib.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (94 commits)
  USB: remove err() macro from more usb drivers
  USB: remove err() macro from usb misc drivers
  USB: remove err() macro from usb core code
  USB: remove err() macro from usb class drivers
  USB: remove use of err() in drivers/usb/serial
  USB: remove info() macro from usb mtd drivers
  USB: remove info() macro from usb input drivers
  USB: remove info() macro from usb network drivers
  USB: remove info() macro from remaining usb drivers
  USB: remove info() macro from usb/misc drivers
  USB: remove info() macro from usb/serial drivers
  USB: remove warn macro from HID core
  USB: remove warn() macro from usb drivers
  USB: remove warn() macro from usb net drivers
  USB: remove warn() macro from usb media drivers
  USB: remove warn() macro from usb input drivers
  usb/fsl_qe_udc: clear data toggle on clear halt request
  usb/fsl_qe_udc: fix response to get status request
  fsl_usb2_udc: Fix oops on probe failure.
  fsl_usb2_udc: Add a wmb before priming endpoint.
  ...

* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (44 commits)
  drm/i915: fix ioremap of a user address for non-root (CVE-2008-3831)
  drm: make CONFIG_DRM depend on CONFIG_SHMEM.
  radeon: fix PCI bus mastering support enables.
  radeon: add RS400 family support.
  drm/radeon: add support for RS740 IGP chipsets.
  i915: GM45 has GM965-style MCH setup.
  i915: Don't run retire work handler while suspended
  i915: Map status page cached for chips with GTT-based HWS location.
  i915: Fix up ring initialization to cover G45 oddities
  i915: Use non-reserved status page index for breadcrumb
  drm: Increment dev_priv->irq_received so i915_gem_interrupts count works.
  drm: kill drm_device->irq
  drm: wbinvd is cache coherent.
  i915: add missing return in error path.
  i915: fixup permissions on gem ioctls.
  drm: Clean up many sparse warnings in i915.
  drm: Use ioremap_wc in i915_driver instead of ioremap, since we always want WC.
  drm: G33-class hardware has a newer 965-style MCH (no DCC register).
  drm: Avoid oops in GEM execbuffers with bad arguments.
  DRM: Return -EBADF on bad object in flink, and return curent name if it exists.
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (95 commits)
  V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilation
  V4L/DVB (9294): gspca: Add a stop sequence in t613.
  V4L/DVB (9293): gspca: Separate and fix the sensor dependant sequences in t613.
  V4L/DVB (9292): gspca: Call the control setting functions at init time in t613.
  V4L/DVB (9291): gspca: Do not set the white balance temperature by default in t613.
  V4L/DVB (9290): gspca: Adjust the sensor init sequences in t613.
  V4L/DVB (9289): gspca: Other sensor identified as om6802 in t613.
  V4L/DVB (9288): gspca: Write to the USB device and not USB interface in t613.
  V4L/DVB (9287): gspca: Change the name of the multi bytes write function in t613.
  V4L/DVB (9286): gspca: Compilation problem of gspca.c and the kernel version.
  V4L/DVB (9283): Correct typo and enable setting the gain on the mt9m111 sensor
  V4L/DVB (9282): Properly iterate the urbs when destroying them.
  V4L/DVB (9281): gspca: Add hflip and vflip to the po1030 sensor
  V4L/DVB (9280): gspca: Use the gspca debug macros
  V4L/DVB (9279): gspca: Correct some copyright headers
  V4L/DVB (9278): gspca: Remove the m5602_debug variable
  V4L/DVB (9277): gspca: propagate an error in m5602_start_transfer()
  V4L/DVB (9276): videobuf-dvb: two functions are now static
  V4L/DVB (9275): dvb: input data pointer of cx24116_writeregN() should be const
  V4L/DVB (9274): Remove spurious messages and turn into debug.
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Remove automatic enabling of the HUGE_FILE feature flag
  ext4: Replace hackish ext4_mb_poll_new_transaction with commit callback
  ext4: Update Documentation/filesystems/ext4.txt
  ext4: Remove unused mount options: nomballoc, mballoc, nocheck
  ext4: Remove compile warnings when building w/o CONFIG_PROC_FS
  ext4: Add missing newlines to printk messages
  ext4: Fix file fragmentation during large file write.
  vfs: Add no_nrwrite_index_update writeback control flag
  vfs: Remove the range_cont writeback mode.
  ext4: Use tag dirty lookup during mpage_da_submit_io
  ext4: let the block device know when unused blocks can be discarded
  ext4: Don't reuse released data blocks until transaction commits
  ext4: Use an rbtree for tracking blocks freed during transaction.
  ext4: Do mballoc init before doing filesystem recovery
  ext4: Free ext4_prealloc_space using kmem_cache_free
  ext4: Fix Kconfig typo for ext4dev
  ext4: Remove an old reference to ext4dev in Makefile comment

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove err() and
use the system-wide standard of dev_err() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

err() is going away, so switch to dev_err() or printk() if it's really
needed.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.  In the
few places that will not work out, use a basic printk().

Clean up the remaining usages of this in the drivers/usb/ directory.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There were two stragglers that got missed in the last merge of the HID tree that forgot to change the warn() calls to dev_warn().  This patch fixes them up.
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().

Cc: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB should not be having it's own printk macros, so remove warn() and
use the system-wide standard of dev_warn() wherever possible.  In the
few places that will not work out, use a basic printk().

Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Fix to comply with USB spec.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The original code didn't respond correctly to get status request on
device and endpoint.  Although normal operations can work without the
fix.  It is not compliant with USB spec chapter9 and fails USBCV ch9
tests.  The patch fix this and a few style/typo problems.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>