Programming DMA mode may destroy current PIO mode setting so if
CONFIG_HPT34X_AUTODMA=n (the default case) make ide_tune_dma() fail
early by disabling all host DMA masks and re-tune PIO mode.

This fix doesn't help with the driver being broken but is needed
for some other changes.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks
shouldn't be initialized or bad things will happen.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks
shouldn't be initialized or bad things will happen.
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks
shouldn't be initialized or bad things will happen.

Also this host driver requires valid PCI BAR4 for normal operation so
check it in ->init_chipset and fail initialization if not set.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

If ->dma_base is not set (== PCI BAR4 cannot be reserved) then DMA hooks
shouldn't be initialized or bad things will happen.

Also this host driver requires valid PCI BAR4 for normal operation so
check it in ->init_chipset and fail initialization if not set.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use ->OUTBSYNC instead of ->OUTB when writing command register
  (needed for scc_pata and pmac host drivers).

* Don't check DRDY bit of the status register on ATAPI devices
  (ATAPI devices are free to ignore DRDY bit).

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move ide_in_drive_list() from ide-dma.c to ide-iops.c.

* Add ivb_list[] table for listening early UDMA66 devices which don't conform
  to ATA4 standard wrt cable detection (bit14 is zero, only bit13 is valid)
  and use only device side cable detection for them since host side cable
  detection may be unreliable.

* Add model "QUANTUM FIREBALLlct10 05" with firwmare "A03.0900" to the list
  (from Craig's bugreport).

v2:
* Improve kernel message basing on suggestion from Sergei.

v3:
* Don't print kernel message when no device side cable detection is done,
  plus some minor fixes.  (Noticed by Sergei)

Thanks to Craig for testing this patch.

Cc: Craig Block <chblock3@yahoo.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

pmac_ide_tune_chipset() don't set drive->init_speed.

Fix it by setting drive->{current,init}_speed in pmac_ide_do_setfeature()
and clean up pmac_ide_{tune_chipset,mdma_enable,udma_enable}().
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add DMA blacklist checking (->ide_dma_on check probably can go now).

* Add ->atapi_dma flag checking and remove no longer needed
  ns87415_ide_dma_check() from ns87415 host driver.

* Remove now needless __ide_dma_check() wrapper and symbol export.

* Check drive->autodma instead of hwif->autodma (there should be no changes in
  behavior as all users of config_drive_for_dma() set both ->autodma flags).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Some host drivers depend on CONFIG_IDE_GENERIC to do the probing but their
config options lack explicit dependencies on IDE_GENERIC.  In the long-term
these host drivers should be fixed to do the probing themselves but for now
fix them by making their config options select CONFIG_IDE_GENERIC.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

These days, CONFIG_IDE_GENERIC causes more confusion and
misconfiguration than it helps.  Especially so because libata is
linked after the generic driver.  Default to N.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Cc: "P.C.Chan" <pc.chan@alcatel-lucent.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With commit ab144f5e the patching code
now collects the complete new instruction stream into a temp buffer
before finally patching in the new insns.  In some cases the paravirt
patchers will choose to leave the patch site unpatched (length mismatch,
clobbers mismatch, etc).

This causes the new patching code to copy an uninitialized temp buffer,
i.e.  garbage, to the callsite.  Simply make sure to always initialize
the buffer with the original instruction stream.  A better fix is to
audit all the patchers and return proper length so that apply_paravirt()
can skip copies when we leave the patch site untouched.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4549/1: KS8695: Fix build errors
  [ARM] 4546/1: s3c2410: fix architecture typo for s3c2442
  [ARM] 4544/1: arm: fix section mismatch in pxa fb

Very old 64bit binutils have .cfi_startproc/endproc, but
no .cfi_rel_offset. Check for .cfi_rel_offset too.

Cc: Jan Beulich <jbeulich@novell.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Very old binutils (2.12.90...) seem to have trouble with newlines
in assembler macro invocation. They put them into the resulting
argument expansion. In this case this lead to a parse error because
a .rept expression ended up spread over multiple lines. Change the PMDS()
invocation to a single line.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixed wrong expression which enabled watchdogs even if nmi_watchdog kernel
parameter wasn't set. This regression got slightly introduced with commit
b7471c6d.

Introduced NMI_DISABLED (-1) which allows to switch the value of NMI_DEFAULT
without breaking the APIC NMI watchdog code (again).

Fixes:
   https://bugzilla.novell.com/show_bug.cgi?id=298084
   http://bugzilla.kernel.org/show_bug.cgi?id=7839
And likely some more nmi_watchdog=0 related issues.
Signed-off-by: Daniel Gollub <dgollub@suse.de>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This should fix an oops with PCMCIA PATA devices

	http://bugzilla.kernel.org/show_bug.cgi?id=8424

This is not a full fix for the problem, but probably
still the right thing to do.

[ I'm almost certain it's *not* the right thing to do, but it avoids an
  oops, and I want comments from others on what the right thing would
  actually be..  I suspect we should just remove the use of dma_mask
  entirely in this function, and just use coherent_dma_mask.  - Linus ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If the forcedeth driver receives too much work in an interrupt, it
assumes it has a broken hardware with stuck IRQ.  It works around the
problem by disabling interrupts on the nic but makes a printk while
holding device spinlog - which isn't smart thing to do if you have
netconsole on the same nic.

This patch moves the printk's out of the spinlock protected area.

Without this patch the machine hangs hard.  With this patch everything
still works even when there is significant increase on CPU usage while
using the nic.
Signed-off-by: Timo Jantunen <jeti@iki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use cpu_relax() in the busy loops, as atomic_read() doesn't automatically
imply volatility for i386 and x86_64. x86_64 doesn't have this issue because
it open-codes the while loop in smpboot.c:smp_callin() itself that already
uses cpu_relax().

For i386, however, smpboot.c:smp_callin() calls wait_for_init_deassert()
which is buggy for mach-default and mach-es7000 cases.

[ I test-built a kernel -- smp_callin() itself got inlined in its only
  callsite, smpboot.c:start_secondary() -- and the relevant piece of
  code disassembles to the following:

0xc1019704 <start_secondary+12>:        mov    0xc144c4c8,%eax
0xc1019709 <start_secondary+17>:        test   %eax,%eax
0xc101970b <start_secondary+19>:        je     0xc1019709 <start_secondary+17>

  init_deasserted (at 0xc144c4c8) gets fetched into %eax only once and
  then we loop over the test of the stale value in the register only,
  so these look like real bugs to me. With the fix below, this becomes:

0xc1019706 <start_secondary+14>:        pause
0xc1019708 <start_secondary+16>:        cmpl   $0x0,0xc144c4c8
0xc101970f <start_secondary+23>:        je     0xc1019706 <start_secondary+14>

  which looks nice and healthy. ]

Thanks to Heiko Carstens for noticing this.
Signed-off-by: Satyam Sharma <satyam@infradead.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The lguest block device only requests one minor, which means
partitions don't work (eg "root=/dev/lgba1").

Let's follow the crowd and ask for 16.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: arch/sh64/kernel/setup.c: duplicate include removal.
  sh64: arch/sh64/kernel/signal.c: duplicate include removal
  sh64: Add missing dma_sync_single_for_*().

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: remove extraneous ; on scif_sercon_putc wait loop
  sh: Add missing dma_sync_single_range_for_*().
  sh: panic on machvec section misalignment.
  sh: Fix PTRACE_PEEKTEXT/PEEKDATA fallout from generic_ptrace_peekdata().

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6:
  hwmon: (smsc47m1) restore missing name attribute
  hwmon: (w83627ehf) don't assume bank 0
  hwmon: (w83627ehf) read fan_div values during probe
  hwmon: fix w83781d temp sensor type setting

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  Cross-compilation between e.g. i386 -> 64bit could break -> work around it
  [IA64] Enable early console for Ski simulator
  [IA64] forbid ptrace changes psr.ri to 3
  [IA64] Failure to grow RBS
  [IA64] Fix processor_get_freq
  [IA64] SGI Altix : fix a force_interrupt bug on altix
  [IA64] Update arch/ia64/configs/* s/SLAB/SLUB/
  [IA64] get back PT_IA_64_UNWIND program header
  [IA64] need NOTES in vmlinux.lds.S
  [IA64] make unwinder stop at last frame of the bootloader
  [IA64] Clean up CPE handler registration
  [IA64] Include Kconfig.preempt
  [IA64] SN2 needs platform specific irq_to_vector() function.
  [IA64] Use atomic64_read to read an atomic64_t.
  [IA64] disable irq's and check need_resched before safe_halt

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: correct error code in selinux_audit_rule_init

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Incorrect semicolon after if statement
  mlx4_core: Wait 1 second after reset before accessing device
  IPoIB: Fix leak in ipoib_transport_dev_init() error path
  IB/mlx4: Fix opcode returned in RDMA read completion
  IB/srp: Add OUI for new Cisco targets
  IB/srp: Wrap OUI checking for workarounds in helper functions
  RDMA/cxgb3: Always call low level send function via cxgb3_ofld_send()
  IB: Move the macro IB_UMEM_MAX_PAGE_CHUNK() to umem.c
  IB: Include <linux/list.h> and <linux/rwsem.h> from <rdma/ib_verbs.h>
  IB: Include <linux/list.h> from <rdma/ib_mad.h>
  IB/mad: Fix address handle leak in mad_rmpp
  IB/mad: agent_send_response() should be void
  IB/mad: Fix memory leak in switch handling in ib_mad_recv_done_handler()
  IB/mad: Fix error path if response alloc fails in ib_mad_recv_done_handler()
  IB/sa: Don't need to check for default P_Key twice
  IB/core: Ignore membership bit in ib_find_pkey()

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [MATH-EMU]: Fix underflow exception reporting.
  [SPARC64]: Create a HWCAP_SPARC_N2 and report it to userspace on Niagara-2.
  [SPARC64]: SMP trampoline needs to avoid %tick_cmpr on sun4v too.
  [SPARC64]: Do not touch %tick_cmpr on sun4v cpus.
  [SPARC64]: Niagara-2 optimized copies.
  [SPARC64]: Allow userspace to get at the machine description.
  [SPARC32]: Remove superfluous 'kernel_end' alignment on sun4c.
  [SPARC32]: Fix bogus ramdisk image location check.
  [SPARC32]: Remove iommu from struct sbus_bus and use archdata like sparc64.

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPv6]: Invalid semicolon after if statement
  [NET]: Fix unbalanced rcu_read_unlock in __sock_create
  [VLAN] net/8021q/vlanproc.c: fix check-after-use
  [NET]: Unexport dev_ethtool
  [IOAT]: Remove redundant struct member to avoid descriptor cache miss
  [ECONET]: remove econet_packet_type on unload
  [AX25]: don't free pointers to statically allocated data
  [PATCH] mac80211: probe for hidden SSIDs in pre-auth scan
  [PATCH] mac80211: fix tx status frame code
  [BRIDGE]: Fix typo in net/bridge/br_stp_if.c
  [BRIDGE]: sysfs locking fix.
  [NETFILTER]: nf_nat_sip: don't drop short packets
  [NETFILTER]: nf_conntrack_sip: fix SIP-URI parsing
  [NETFILTER]: nf_conntrack_sip: check sname != NULL before calling strncmp
  [NETFILTER]: netfilter: xt_u32 bug correction

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  [AVR32] Define mmiowb()
  [AVR32] Fix bogus pte_page() definition
  [AVR32] Simplify pte_alloc_one{,_kernel}
  include/asm-avr32/pgalloc.h: kmalloc + memset conversion to kcalloc
  [AVR32] Wire up i2c-gpio on the ATNGW100 board
  [AVR32] leds-gpio for stk1000

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix invalid semicolon after if statement
  [POWERPC] ps3: Fix no storage devices found
  [POWERPC] Fix for assembler -g
  [POWERPC] Fix small race in 44x tlbie function
  [POWERPC] Remove unused code causing a compile warning
  [POWERPC] cell: Fix errno for modular spufs_create with invalid neighbour

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: adjust libata to ignore errors after spinup
  ata_piix: add TECRA M7 to broken suspend list
  pata_hpt{37x|3x2n}: fix clock reporting (take 2)
  pata_hpt37x: actually clock HPT374 with 50 MHz DPLL (take 2)
  pata_artop: fix UDMA5 for AEC6280[R] and UDMA6 for AEC6880[R]
  ata_piix: update map 10b for ich8m
  sata_mv: PCI IDs for Hightpoint RocketRaid 1740/1742
  [libata] pata_isapnp: replace missing module device table

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup:
  [x86 setup] edd.c: make sure MBR signatures actually get reported
  [x86 setup] Don't use EDD to get the MBR signature
  [x86 setup] The current display page is returned in %bh, not %bl

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Check return code on failed alloc
  [CIFS] Update CIFS project web site
  [CIFS] Fix hang in find_writable_file

This fixes a vulnerability in the "parent process death signal"
implementation discoverd by Wojciech Purczynski of COSEINC PTE Ltd.
and iSEC Security Research.

http://marc.info/?l=bugtraq&m=118711306802632&w=2Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

Adrian Bunk: scripts/mod/file2alias.c is compiled with HOSTCC and ensures that
kernel_ulong_t is correct, but it can't cope with different padding on
different architectures.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>

When using Ski to debug early startup, it's a bit of a pain not to
have printk.

This patch enables the simulated console very early.
It may be worth conditionalising on the command line... but this is
enough for now.
Signed-off-by: Peter Chubb <peterc@gelato.unsw.edu.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>