- 24 Jul, 2008 40 commits
-
-
Johannes Weiner authored
Since alloc_bootmem_core does no goal-fallback anymore and just returns NULL if the allocation fails, we might now use it in alloc_bootmem_section without all the fixup code for a misplaced allocation. Also, the limit can be the first PFN of the next section as the semantics is that the limit is _above_ the allocated region, not within. Signed-off-by:
Johannes Weiner <hannes@saeurebad.de> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
__alloc_bootmem_node already does this, make the interface consistent. Signed-off-by:
-
Johannes Weiner authored
The old node-agnostic code tried allocating on all nodes starting from the one with the lowest range. alloc_bootmem_core retried without the goal if it could not satisfy it and so the goal was only respected at all when it happened to be on the first (lowest page numbers) node (or theoretically if allocations failed on all nodes before to the one holding the goal). Introduce a non-panicking helper that starts allocating from the node holding the goal and falls back only after all thes tries failed, thus moving the goal fallback code out of alloc_bootmem_core. Make all other allocation functions benefit from this new helper. Signed-off-by:
-
Johannes Weiner authored
Introduce new helpers that mark a range that resides completely on a node or node-agnostic ranges that might also span node boundaries. The free/reserve API functions will then directly use these helpers. Note that the free/reserve semantics become more strict: while the prior code took basically arbitrary range arguments and marked the PFNs that happen to fall into that range, the new code requires node-specific ranges to be completely on the node. The node-agnostic requests might span node boundaries as long as the nodes are contiguous. Passing ranges that do not satisfy these criteria is a bug. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by:
-
Johannes Weiner authored
Factor out the common operation of marking a range on the bitmap. [akpm@linux-foundation.org: fix various warnings] Signed-off-by:
-
Johannes Weiner authored
alloc_bootmem_core has become quite nasty to read over time. This is a clean rewrite that keeps the semantics. bdata->last_pos has been dropped. bdata->last_success has been renamed to hint_idx and it is now an index relative to the node's range. Since further block searching might start at this index, it is now set to the end of a succeeded allocation rather than its beginning. bdata->last_offset has been renamed to last_end_off to be more clear that it represents the ending address of the last allocation relative to the node. [y-goto@jp.fujitsu.com: fix new alloc_bootmem_core()] Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by:
-
Johannes Weiner authored
Rewrite the code in a more concise way using less variables. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by:
-
Johannes Weiner authored
link_bootmem handles an insertion of a new descriptor into the sorted list in more or less three explicit branches; empty list, insert in between and append. These cases can be expressed implicite. Also mark the sorted list as initdata as it can be thrown away after boot as well. Signed-off-by:
-
Johannes Weiner authored
Reincarnate get_mapsize as bootmap_bytes and implement bootmem_bootmap_pages on top of it. Adjust users of these helpers and make free_all_bootmem_core use bootmem_bootmap_pages instead of open-coding it. Signed-off-by:
-
Johannes Weiner authored
Introduce the bootmem_debug kernel parameter that enables very verbose diagnostics regarding all range operations of bootmem as well as the initialization and release of nodes. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by:
-
Johannes Weiner authored
Signed-off-by:
-
Johannes Weiner authored
Change the description, move a misplaced comment about the allocator itself and add me to the list of copyright holders. Signed-off-by:
-
Johannes Weiner authored
This only reorders functions so that further patches will be easier to read. No code changed. Signed-off-by:
-
Adam Litke authored
With shared reservations (and now also with private reservations), we reserve huge pages at mmap time. We also account for the mapping against fs quota to prevent a reservation from being preempted by quota exhaustion. When testing with the libhugetlbfs test suite, I found a problem with quota accounting. FS quota for allocated pages is handled correctly but we are not releasing quota for private pages that were reserved but never allocated. Do this in hugetlb_vm_op_close() at the same time as unused page reservations are released. Signed-off-by:
Adam Litke <agl@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@saeurebad.de> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: Hugh Dickins <hugh@veritas.com> Acked-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Mel Gorman authored
When removing a huge page from the hugepage pool for a fault the system checks to see if the mapping requires additional pages to be reserved, and if it does whether there are any unreserved pages remaining. If not, the allocation fails without even attempting to get a page. In order to determine whether to apply this check we call vma_has_private_reserves() which tells us if this vma is MAP_PRIVATE and is the owner. This incorrectly triggers the remaining reservation test for MAP_SHARED mappings which prevents allocation of the final page in the pool even though it is reserved for this mapping. In reality we only want to check this for MAP_PRIVATE mappings where the process is not the original mapper. Replace vma_has_private_reserves() with vma_has_reserves() which indicates whether further reserves are required, and update the caller. Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Acked-by:
-
Jon Tollefson authored
Instead of using the variable mmu_huge_psize to keep track of the huge page size we use an array of MMU_PAGE_* values. For each supported huge page size we need to know the hugepte_shift value and have a pgtable_cache. The hstate or an mmu_huge_psizes index is passed to functions so that they know which huge page size they should use. The hugepage sizes 16M and 64K are setup(if available on the hardware) so that they don't have to be set on the boot cmd line in order to use them. The number of 16G pages have to be specified at boot-time though (e.g. hugepagesz=16G hugepages=5). Signed-off-by:
Jon Tollefson <kniht@linux.vnet.ibm.com> Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Jon Tollefson authored
Adds a check for an overflow in the filesystem size so if someone is checking with statfs() on a 16G blocksize hugetlbfs in a 32bit binary that it will report back EOVERFLOW instead of a size of 0. Acked-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
-
Jon Tollefson authored
The huge page size is defined for 16G pages. If a hugepagesz of 16G is specified at boot-time then it becomes the huge page size instead of the default 16M. The change in pgtable-64K.h is to the macro pte_iterate_hashed_subpages to make the increment to va (the 1 being shifted) be a long so that it is not shifted to 0. Otherwise it would create an infinite loop when the shift value is for a 16G page (when base page size is 64K). Signed-off-by:
-
Jon Tollefson authored
The 16G huge pages have to be reserved in the HMC prior to boot. The location of the pages are placed in the device tree. This patch adds code to scan the device tree during very early boot and save these page locations until hugetlbfs is ready for them. Acked-by:
-
Jon Tollefson authored
The 16G page locations have been saved during early boot in an array. The alloc_bootmem_huge_page() function adds a page from here to the huge_boot_pages list. Acked-by:
-
Jon Tollefson authored
Allow alloc_bootmem_huge_page() to be overridden by architectures that can't always use bootmem. This requires huge_boot_pages to be available for use by this function. This is required for powerpc 16G pages, which have to be reserved prior to boot-time. The location of these pages are indicated in the device tree. Acked-by:
-
Nick Piggin authored
Allow configurations with the default huge page size which is different to the traditional HPAGE_SIZE size. The default huge page size is the one represented in the legacy /proc ABIs, SHM, and which is defaulted to when mounting hugetlbfs filesystems. This is implemented with a new kernel option default_hugepagesz=, which defaults to HPAGE_SIZE if not specified. Signed-off-by:
-
Andi Kleen authored
Add an hugepagesz=... option similar to IA64, PPC etc. to x86-64. This finally allows to select GB pages for hugetlbfs in x86 now that all the infrastructure is in place. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Acked-by:
-
Andi Kleen authored
Straight forward extensions for huge pages located in the PUD instead of PMDs. Signed-off-by:
-
Andi Kleen authored
- Reword sentence to clarify meaning with multiple options - Add support for using GB prefixes for the page size - Add extra printk to delayed > MAX_ORDER allocation code Acked-by:
-
Andi Kleen authored
Make some infrastructure changes to allow boot-time allocation of different hugepage page sizes. - move all basic hstate initialisation into hugetlb_add_hstate - create a new function hugetlb_hstate_alloc_pages() to do the actual initial page allocations. Call this function early in order to allocate giant pages from bootmem. - Check for multiple hugepages= parameters Acked-by:
Andrew Hastings <abh@cray.com> Signed-off-by:
-
Andi Kleen authored
This is needed on x86-64 to handle GB pages in hugetlbfs, because it is not practical to enlarge MAX_ORDER to 1GB. Instead the 1GB pages are only allocated at boot using the bootmem allocator using the hugepages=... option. These 1G bootmem pages are never freed. In theory it would be possible to implement that with some complications, but since it would be a one-way street (>= MAX_ORDER pages cannot be allocated later) I decided not to currently. The >= MAX_ORDER code is not ifdef'ed per architecture. It is not very big and the ifdef uglyness seemed not be worth it. Known problems: /proc/meminfo and "free" do not display the memory allocated for gb pages in "Total". This is a little confusing for the user. Acked-by:
-
Andi Kleen authored
hugetlb will need to get compound pages from bootmem to handle the case of them being greater than or equal to MAX_ORDER. Export the constructor function needed for this. Acked-by:
-
Andi Kleen authored
Straight forward variant of the existing __alloc_bootmem_node, only subsequent patch when allocating giant hugepages at boot -- don't want to panic if we can't allocate as many as the user asked for. Signed-off-by:
-
Andi Kleen authored
Need this as a separate function for a future patch. No behaviour change. Acked-by:
-
Nishanth Aravamudan authored
Provide new hugepages user APIs that are more suited to multiple hstates in sysfs. There is a new directory, /sys/kernel/hugepages. Underneath that directory there will be a directory per-supported hugepage size, e.g.: /sys/kernel/hugepages/hugepages-64kB /sys/kernel/hugepages/hugepages-16384kB /sys/kernel/hugepages/hugepages-16777216kB corresponding to 64k, 16m and 16g respectively. Within each hugepages-size directory there are a number of files, corresponding to the tracked counters in the hstate, e.g.: /sys/kernel/hugepages/hugepages-64/nr_hugepages /sys/kernel/hugepages/hugepages-64/nr_overcommit_hugepages /sys/kernel/hugepages/hugepages-64/free_hugepages /sys/kernel/hugepages/hugepages-64/resv_hugepages /sys/kernel/hugepages/hugepages-64/surplus_hugepages Of these files, the first two are read-write and the latter three are read-only. The size of the hugepage being manipulated is trivially deducible from the enclosing directory and is always expressed in kB (to match meminfo). [dave@linux.vnet.ibm.com: fix build] [nacc@us.ibm.com: hugetlb: hang off of /sys/kernel/mm rather than /sys/kernel] [nacc@us.ibm.com: hugetlb: remove CONFIG_SYSFS dependency] Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Andi Kleen authored
Add the ability to configure the hugetlb hstate used on a per mount basis. - Add a new pagesize= option to the hugetlbfs mount that allows setting the page size - This option causes the mount code to find the hstate corresponding to the specified size, and sets up a pointer to the hstate in the mount's superblock. - Change the hstate accessors to use this information rather than the global_hstate they were using (requires a slight change in mm/memory.c so we don't NULL deref in the error-unmap path -- see comments). [np: take hstate out of hugetlbfs inode and vma->vm_private_data] Acked-by:
-
Andi Kleen authored
Add basic support for more than one hstate in hugetlbfs. This is the key to supporting multiple hugetlbfs page sizes at once. - Rather than a single hstate, we now have an array, with an iterator - default_hstate continues to be the struct hstate which we use by default - Add functions for architectures to register new hstates [akpm@linux-foundation.org: coding-style fixes] Acked-by:
-
Andi Kleen authored
The goal of this patchset is to support multiple hugetlb page sizes. This is achieved by introducing a new struct hstate structure, which encapsulates the important hugetlb state and constants (eg. huge page size, number of huge pages currently allocated, etc). The hstate structure is then passed around the code which requires these fields, they will do the right thing regardless of the exact hstate they are operating on. This patch adds the hstate structure, with a single global instance of it (default_hstate), and does the basic work of converting hugetlb to use the hstate. Future patches will add more hstate structures to allow for different hugetlbfs mounts to have different page sizes. [akpm@linux-foundation.org: coding-style fixes] Acked-by:
-
Andi Kleen authored
Needed to avoid code duplication in follow up patches. Acked-by:
-
Nishanth Aravamudan authored
Add a kobject to create /sys/kernel/mm when sysfs is mounted. The kobject will exist regardless. This will allow for the hugepage related sysfs directories to exist under the mm "subsystem" directory. Add an ABI file appropriately. [kosaki.motohiro@jp.fujitsu.com: fix build] Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Nishanth Aravamudan authored
Towards the end of putting all core mm initialization in mm_init.c, I plan on putting the creation of a mm kobject in a function in that file. However, the file is currently only compiled if CONFIG_DEBUG_MEMORY_INIT is set. Remove this dependency, but put the code under an #ifdef on the same config option. This should result in no functional changes. Signed-off-by:
-
Eric Dumazet authored
Christoph recently added /proc/vmallocinfo file to get information about vmalloc allocations. This patch adds NUMA specific information, giving number of pages allocated on each memory node. This should help to check that vmalloc() is able to respect NUMA policies. Example of output on a four nodes machine (one cpu per node) 1) network hash tables are evenly spreaded on four nodes (OK) (Same point for inodes and dentries hash tables) 2) iptables tables (x_tables) are correctly allocated on each cpu node (OK). 3) sys_swapon() allocates its memory from one node only. 4) each loaded module is using memory on one node. Sysadmins could tune their setup to change points 3) and 4) if necessary. grep "pages=" /proc/vmallocinfo 0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204/0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128 0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64 0xffffc2000031a000-0xffffc2000031d000 12288 alloc_large_system_hash+0x204/0x2c0 pages=2 vmalloc N1=1 N2=1 0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e/0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3 0xffffc2000033e000-0xffffc20000341000 12288 sys_swapon+0x640/0xac0 pages=2 vmalloc N0=2 0xffffc20000341000-0xffffc20000344000 12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N0=2 0xffffc20000344000-0xffffc20000347000 12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N1=2 0xffffc20000347000-0xffffc2000034a000 12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N2=2 0xffffc2000034a000-0xffffc2000034d000 12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N3=2 0xffffc20004381000-0xffffc20004402000 528384 alloc_large_system_hash+0x204/0x2c0 pages=128 vmalloc N0=32 N1=32 N2=32 N3=32 0xffffc20004402000-0xffffc20004803000 4198400 alloc_large_system_hash+0x204/0x2c0 pages=1024 vmalloc vpages N0=256 N1=256 N2=256 N3=256 0xffffc20004803000-0xffffc20004904000 1052672 alloc_large_system_hash+0x204/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64 0xffffc20004904000-0xffffc20004bec000 3047424 sys_swapon+0x640/0xac0 pages=743 vmalloc vpages N0=743 0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 pages=14 vmalloc N1=14 0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 pages=4 vmalloc N0=4 0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N0=2 0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 pages=10 vmalloc N1=10 0xffffffffa0022000-0xffffffffa0028000 24576 sys_init_module+0xc27/0x1d00 pages=5 vmalloc N3=5 0xffffffffa0028000-0xffffffffa0050000 163840 sys_init_module+0xc27/0x1d00 pages=39 vmalloc N1=39 0xffffffffa0050000-0xffffffffa0052000 8192 sys_init_module+0xc27/0x1d00 pages=1 vmalloc N1=1 0xffffffffa0052000-0xffffffffa0056000 16384 sys_init_module+0xc27/0x1d00 pages=3 vmalloc N1=3 0xffffffffa0056000-0xffffffffa0081000 176128 sys_init_module+0xc27/0x1d00 pages=42 vmalloc N3=42 0xffffffffa0081000-0xffffffffa00ae000 184320 sys_init_module+0xc27/0x1d00 pages=44 vmalloc N3=44 0xffffffffa00ae000-0xffffffffa00b1000 12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2 0xffffffffa00b1000-0xffffffffa00b9000 32768 sys_init_module+0xc27/0x1d00 pages=7 vmalloc N0=7 0xffffffffa00b9000-0xffffffffa00c4000 45056 sys_init_module+0xc27/0x1d00 pages=10 vmalloc N3=10 0xffffffffa00c6000-0xffffffffa00e0000 106496 sys_init_module+0xc27/0x1d00 pages=25 vmalloc N2=25 0xffffffffa00e0000-0xffffffffa00f1000 69632 sys_init_module+0xc27/0x1d00 pages=16 vmalloc N2=16 0xffffffffa00f1000-0xffffffffa00f4000 12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2 0xffffffffa00f4000-0xffffffffa00f7000 12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2 [akpm@linux-foundation.org: fix comment] Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Pavel Machek authored
[akpm@linux-foundation.org: fix comment text] Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
