* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: Avoid a gcc warning in ocfs2_wipe_inode().
  ocfs2: Avoid direct write if we fall back to buffered I/O
  ocfs2_dlmfs: Fix math error when reading LVB.
  ocfs2: Update VFS inode's id info after reflink.
  ocfs2: potential ERR_PTR dereference on error paths
  ocfs2: Add directory entry later in ocfs2_symlink() and ocfs2_mknod()
  ocfs2: use OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_mknod error path
  ocfs2: use OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_symlink error path
  ocfs2: add OCFS2_INODE_SKIP_ORPHAN_DIR flag and honor it in the inode wipe code
  ocfs2: Reset status if we want to restart file extension.
  ocfs2: Compute metaecc for superblocks during online resize.
  ocfs2: Check the owner of a lockres inside the spinlock
  ocfs2: one more warning fix in ocfs2_file_aio_write(), v2
  ocfs2_dlmfs: User DLM_* when decoding file open flags.

The x86_64 call_rwsem_wait() treats the active state counter part of the
R/W semaphore state as being 16-bit when it's actually 32-bit (it's half
of the 64-bit state).  It should do "decl %edx" not "decw %dx".
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-core: Use per-adapter userspace device lists
  i2c: Fix probing of FSC hardware monitoring chips
  i2c-core: Erase pointer to clientdata on removal

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix resource leak in failure path of perf_event_open()

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: Fix RCU lockdep splat on freezer_fork path
  rcu: Fix RCU lockdep splat in set_task_cpu on fork path
  mutex: Don't spin when the owner CPU is offline or other weird cases

Using a single list for all userspace devices leads to a dead lock
on multiplexed buses in some circumstances (mux chip instantiated
from userspace). This is solved by using a separate list for each
bus segment.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Michael Lawnick <ml.lawnick@gmx.de>

Some FSC hardware monitoring chips (Syleus at least) doesn't like
quick writes we typically use to probe for I2C chips. Use a regular
byte read instead for the address they live at (0x73). These are the
only known chips living at this address on PC systems.

For clarity, this fix should not be needed for kernels 2.6.30 and
later, as we started instantiating the hwmon devices explicitly based
on DMI data. Still, this fix is valuable in the following two cases:
* Support for recent FSC chips on older kernels. The DMI-based device
  instantiation is more difficult to backport than the device support
  itself.
* Case where the DMI-based device instantiation fails, whatever the
  reason. We fall back to probing in that case, so it should work.

This fixes kernel bug #15634:
https://bugzilla.kernel.org/show_bug.cgi?id=15634Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@kernel.org

After discovering that a lot of i2c-drivers leave the pointer to their
clientdata dangling, it was decided to let the core handle this issue.
It is assumed that the core may access the private data after remove()
as there are no guarantees for the lifetime of such pointers anyhow (see
thread starting at http://lkml.org/lkml/2010/3/21/68)
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

gcc warns that a variable is uninitialized.  It's actually handled, but
an early return fools gcc.  Let's just initialize the variable to a
garbage value that will crash if the usage is ever broken.
Signed-off-by: Joel Becker <joel.becker@oracle.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: remove bad auth_x kmem_cache
  ceph: fix lockless caps check
  ceph: clear dir complete, invalidate dentry on replayed rename
  ceph: fix direct io truncate offset
  ceph: discard incoming messages with bad seq #
  ceph: fix seq counting for skipped messages
  ceph: add missing #includes
  ceph: fix leaked spinlock during mds reconnect
  ceph: print more useful version info on module load
  ceph: fix snap realm splits
  ceph: clear dir complete on d_move

It's useless, since our allocations are already a power of 2.  And it was
allocated per-instance (not globally), which caused a name collision when
we tried to mount a second file system with auth_x enabled.
Signed-off-by: Sage Weil <sage@newdream.net>

The __ variant requires caller to hold i_lock.
Signed-off-by: Sage Weil <sage@newdream.net>

If a rename operation is resent to the MDS following an MDS restart, the
client does not get a full reply (containing the resulting metadata) back.
In that case, a ceph_rename() needs to compensate by doing anything useful
that fill_inode() would have, like d_move().

It also needs to invalidate the dentry (to workaround the vfs_rename_dir()
bug) and clear the dir complete flag, just like fill_trace().
Signed-off-by: Sage Weil <sage@newdream.net>

truncate_inode_pages_range wants the end offset to align with the last byte
in a page.
Signed-off-by: Sage Weil <sage@newdream.net>

We can get old message seq #'s after a tcp reconnect for stateful sessions
(i.e., the MDS).  If we get a higher seq #, that is an error, and we
shouldn't see any bad seq #'s for stateless (mon, osd) connections.
Signed-off-by: Sage Weil <sage@newdream.net>

Increment in_seq even when the message is skipped for some reason.
Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Signed-off-by: Sage Weil <sage@newdream.net>

Decouple the client version from the server side.  Print relevant protocol
and map version info instead.
Signed-off-by: Sage Weil <sage@newdream.net>

The snap realm split was checking i_snap_realm, not the list_head, to
determine if an inode belonged in the new realm.  The check always failed,
which meant we always moved the inode, corrupting the old realm's list and
causing various crashes.

Also wait to release old realm reference to avoid possibility of use after
free.
Signed-off-by: Sage Weil <sage@newdream.net>

d_move() reorders the d_subdirs list, breaking the readdir result caching.
Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on
rename.
Signed-off-by: Sage Weil <sage@newdream.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.

As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set.
And nilfs does not set s_bdi anywhere.  I noticed this problem by the
warning introduced by the recent commit 5129a469 ("Catch filesystem
lacking s_bdi").

 WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e()
 Hardware name: PowerEdge 2850
 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas
 Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38
 Call Trace:
  [<c1028422>] warn_slowpath_common+0x60/0x90
  [<c102845f>] warn_slowpath_null+0xd/0x10
  [<c1095936>] vfs_kern_mount+0xc5/0x14e
  [<c1095a03>] do_kern_mount+0x32/0xbd
  [<c10a811e>] do_mount+0x671/0x6d0
  [<c1073794>] ? __get_free_pages+0x1f/0x21
  [<c10a684f>] ? copy_mount_options+0x2b/0xe2
  [<c107b634>] ? strndup_user+0x48/0x67
  [<c10a81de>] sys_mount+0x61/0x8f
  [<c100280c>] sysenter_do_call+0x12/0x32

This ensures to set s_bdi for nilfs and fixes the sync silent failure.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT.
Fix the MODULE_PARM_DESC so that the code can compile again.
reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

perf_event_open() kfrees event after init failure which doesn't
release all resources allocated by perf_event_alloc().  Use
free_event() instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: <stable@kernel.org>
LKML-Reference: <4BDBE237.1040809@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

when we fall back to buffered write from direct write, we call
__generic_file_aio_write() but that will end up doing direct write
even we are only prepared to do buffered write because the file
has the O_DIRECT flag set. This is a fix for
https://bugzilla.novell.com/show_bug.cgi?id=591039
revised with Joel's comments.
Signed-off-by: Li Dongyang <lidongyang@novell.com>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

Merge branch 'skip_delete_inode' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2-mark into ocfs2-fixes

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (27 commits)
  MIPS: Loongson 2F: Fix of problems introduced by -mfix-loongson2f-jump
  MIPS: Loongson-2F: Use CONFIG_CPU_JUMP_WORKAROUNDS to control workarounds.
  MIPS: Loongson 2F: Enable fixups of the latest binutils
  MIPS: Loongson: Add CPU_LOONGSON2F_WORKAROUNDS
  MIPS: Kconfig: Make Broadcom SoC support naming consistent
  MIPS: BCM63xx: Update defconfig
  MIPS: oprofile: Fix breakage when CONFIG_OPROFILE=m
  STAGING: octeon-ethernet: Use proper phy addresses for Movidis hardware.
  NET: mdio-octeon: Enable the hardware before using it.
  I2C: Fix section mismatch errors in i2c-octeon.c
  MIPS: Loongson: Fix LOONGSON_ADDRWIN_CFG macro.
  MIPS: Loongson: Fix phys_mem_access_prot() check
  MIPS: Loongson: Fix find_vga_mem_init()
  MIPS: Loongson: Fix typo in gdium mach type string.
  MIPS: Use CKSEG1ADDR for uncached handler
  MIPS: Check for accesses beyond the end of the PGD.
  MIPS: Use uasm_i_ds{r,l}l_safe() instead of uasm_i_ds{r,l}l() in tlbex.c
  MIPS: Add uasm_i_dsrl_safe() and uasm_i_dsll_safe() to uasm.
  MIPS: die() does not call die notifier chain
  MIPS: Swarm, Littlesur: Enable PATA platform driver.
  ...

The -mfix-loongson2f-jump option provided by latest CVS binutils have fixed
the out-of-order issue of Loongson-2F described in chapter 15 of the
Loongson2F User Manual [1, 2], but introduced some problems.

The option changes all of the jump target to "addr & 0xcfffffff" through the
at($1) register, but for the reboot address of Loongson 2F 0xbfc00000 this is
wrong.  Avoids the problem via telling the assembler to not use the $at
register.

[1] Loongson2F User Manual (Chinese Version)
    http://www.loongson.cn/uploadfile/file/200808211
[2] English Version of Chapter 15:
    http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=sourceReported-and-tested-by: Liu Shiwei <liushiwei@gmail.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1109/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1106/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

With the  "Fixups of Loongson2F" patch [1] having been applied to binutils
for binutils 2.20.1 we now can use it's time to enable the options provided
by the patch to compile the kernel.

Without these fixups, the system may hang if the erratum is triggered.

For more information on these fixups please refer to the following
references.

[1] "Fixups of Loongson2F" patch for binutils(actually for gas)
    http://sourceware.org/ml/binutils/2009-11/msg00387.html
[2] Chapter 15 of "Loongson2F User Manual"(Chinese Version)
    http://www.loongson.cn/uploadfile/file/200808211
[3] Chapter 15 of the English version Loongson 2F User Manual
    http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=sourceSigned-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Zhang Le <r0bertz@gentoo.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1106/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

As documented in the  Loongson 2F User Manual [2, 3], the old Loongson2F
series (2F01 / 2F02) have the NOP & JUMP issues which requires workarounds
in the kernel and binutils.  This issue has been rectified in Loongson 2F
series 2F03 so no workarounds needed.

Now that the workarounds [1] adding the the -mfix-loongson2f-nop and
-mfix-loongson2f-jump options have been comitted to the binutils the CVS
repository), we can add the workarounds in the kernel.

The workarounds have no significant side effect on the system but may
decrease performance so we control them through a a new
CPU_LOONGSON2F_WORKAROUNDS config option allowing the users to only enable
it as necessary.

[1] "Fixups of Loongson2F" patch for binutils(actually for gas)
    http://sourceware.org/ml/binutils/2009-11/msg00387.html
[2] Chapter 15 of "Loongson2F User Manual"(Chinese Version)
    http://www.loongson.cn/uploadfile/file/200808211
[3] English Version of the above chapter 15
    http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=sourceSigned-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1105/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1082/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

the defconfig was out-of-sync since 2.6.30-rc6, update it with the new
symbols and enable BCM6338, 6345, wireless, b43 driver and LEDs support.
Signed-off-by: Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1081/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

When the oprofile is compiled as a module do_IRQ() is not called in
arch/mips/loongson/lemote-2f/irq.c due to a wrong #ifdef there.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1143/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/1091/Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

In some cases the mdio bus is not enabled at the time of probing.
This prevents anything from working, so we will enable it before
trying to use it, and disable it when the driver is removed.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: netdev@vger.kernel.org
To: gregkh@suse.de
Patchwork: http://patchwork.linux-mips.org/patch/1090/Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-i2c@vger.kernel.org
To: ben-linux@fluff.org
To: khali@linux-fr.org
Cc: linux-mips@linux-mips.org
Cc: rade.bozic.ext@nsn.com
Patchwork: http://patchwork.linux-mips.org/patch/1037/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

There's a typo in the LOONGSON_ADDRWIN_CFG macro. The cpu window mmap
register address should contain the destination parameters not the
source one.  This has not been noticed because the code is only using
source = destination.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1162/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The check used to determine if uncached accelerated should be used or not
is wrong. The parenthesis are misplaced and making the test fail.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1161/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>