An error occurred fetching the project authors.
- 25 Oct, 2007 9 commits
-
-
Alan Cox authored
- Clear unsupported CMSPAR bit - Clean up long chains of a->b-> a bit - Encode baud rate back into tty structure properly Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Alan Cox authored
- Clean up paranoia checks - Propogate back a correct fixed termios Signed-off-by:
-
Alan Cox authored
The empeg is pretty fixed. Tidy up the long foo->bar->baz stuff and encode the fixed speed properly. Signed-off-by:
-
Alan Cox authored
- Expand some x&y to x & y so I could read it when checking - Clear CMSPAR bit in the termios (as the driver does not support it) - Encode the speed using the new tty_encode_baud_rate facility Signed-off-by:
-
Alan Cox authored
The ch341 currently doesn't support most of the hardware setting. So to keep the termios data right we propogate the old termios hardware values back then encode the speed. Signed-off-by:
-
Alan Cox authored
Signed-off-by:
-
Alan Cox authored
- Set the i/ospeed in the initial termios properly - Use the tty_encode_baud_rate functions to report resulting rates properly Signed-off-by:
-
Alan Cox authored
Earlier patches have removed the checking for old v new differences from the USB drivers so we can now pass in a valid blank old termios so that we don't to fill the drivers with magic hacks for console support Signed-off-by:
-
Greg Kroah-Hartman authored
This adds support for the U727 and MC950 devices. Cc: Rony Sarkis <rsarkis@nvtl.com> Signed-off-by:
-
- 24 Oct, 2007 31 commits
-
-
Linus Torvalds authored
The patch is big. Really big. You just won't believe how vastly hugely mindbogglingly big it is. I mean you may think it's a long way down the road to the chemist, but that's just peanuts to how big the patch from 2.6.23 is. But it's all good. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Ungerer authored
Add a port type definition for the Freescale UART driver ports (mcf.c). Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
Remove old definitions of the timer function pointers. Add definitions of the common hardware timer functions. Signed-off-by:
-
Greg Ungerer authored
Create definition for DMA channels on the ColdFire 532x family. Signed-off-by:
-
Greg Ungerer authored
Add platform support structure for use with new ColdFire UART driver. Signed-off-by:
-
Greg Ungerer authored
Mark the m68knommu memory init functions as __init. Signed-off-by:
-
Greg Ungerer authored
Mark the m68knommu setup_arch() function as __init. Signed-off-by:
-
Greg Ungerer authored
Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by:
-
Greg Ungerer authored
Clean up 68EZ328 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by:
-
Greg Ungerer authored
Clean up 68360 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Use common function naming for 68328 timer functions. Signed-off-by:
-
Greg Ungerer authored
Use common function naming for 68328 timer functions to make them consistent with the various other hardware m68knommu timers. Signed-off-by:
-
Greg Ungerer authored
Clean up 68328 timer support code. Removed header includes not needed. Remove use of old m68knommu timer function pointers. Signed-off-by:
-
Greg Ungerer authored
Remove unused variables from setup.c code. Signed-off-by:
-
Linus Torvalds authored
* 'irq-upstream' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: [SPARC, XEN, NET/CXGB3] use irq_handler_t where appropriate drivers/char/riscom8: clean up irq handling isdn/sc: irq handler clean isdn/act2000: fix major bug. clean irq handler. char/pcmcia/synclink_cs: trim trailing whitespace drivers/char/ip2: separate polling and irq-driven work entry points drivers/char/ip2: split out irq core logic into separate function [NETDRVR] lib82596, netxen: delete pointless tests from irq handler Eliminate pointless casts from void* in a few driver irq handlers. [PARPORT] Remove unused 'irq' argument from parport irq functions [PARPORT] Kill useful 'irq' arg from parport_{generic_irq,ieee1284_interrupt} [PARPORT] Consolidate code copies into a single generic irq handler -
Linus Torvalds authored
* 'warnings' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: ni5010: kill unused variable eexpress: fix !SMP unused-var warning cgroup: kill unused variable
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (39 commits) Remove Andrew Morton from list of net driver maintainers. bonding: Acquire correct locks in alb for promisc change bonding: Convert more locks to _bh, acquire rtnl, for new locking bonding: Convert locks to _bh, rework alb locking for new locking bonding: Convert miimon to new locking bonding: Convert balance-rr transmit to new locking Convert bonding timers to workqueues Update MAINTAINERS to reflect my (jgarzik's) current efforts. pasemi_mac: fix typo defxx.c: dfx_bus_init() is __devexit not __devinit s390 MAINTAINERS remove header_ops bug in qeth driver sky2: crash on remove MIPSnet: Delete all the useless debugging printks. AR7 ethernet: small post-merge cleanups and fixes mv643xx_eth: Hook up mv643xx_get_sset_count mv643xx_eth: Remove obsolete checksum offload comment mv643xx_eth: Merge drivers/net/mv643xx_eth.h into mv643xx_eth.c mv643xx_eth: Remove unused register defines mv643xx_eth: Clean up mv643xx_eth.h ...
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: jmicron: update quirk for JMB361/3/5/6 libata: add HTS542525K9SA00 to NCQ blacklist libata-core: auditting chk_status v check_status [libata] checkpatch-inspired cleanups
-
Jeff Garzik authored
Signed-off-by:Jeff Garzik <jgarzik@redhat.com>
-
Jeff Garzik authored
Signed-off-by: -
Jeff Garzik authored
Signed-off-by: -
Tejun Heo authored
Set bits 0, 4, 5 and 7 of PCI configuration register 0x40 in the quirk. This has the following effects and is recommended by the vendor. * Force enable of IDE channels (used to be left alone as BIOS configured) * Change initial phase behavior of PIO cycle such that the host pulls down the bus instead of tristating it. Vendor recommends this setting. The above settings are better for the current generation of controllers and needed for the upcoming next generation. Tested on JMB363. Signed-off-by:
Tejun Heo <htejun@gmail.com> Cc: Ethan Hsiao <ethanhsiao@jmicron.com> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
Another one doing spurious NCQ completions. Blacklist it. Signed-off-by:
-
Alan Cox authored
Did a complete audit of these and found we have another error case. ata_bus_softreset calls ata_check_status which means that it tries to do an ioread8 on the port blindly and check versus 0xFF for an error. It should of course be using the ap->ops method for this via chk_status, and this bug causes a wrog status call on the NS87415 at least. Signed-off-by:
-
Jeff Garzik authored
Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: -
Jeff Garzik authored
He now rules the world, not just this tiny tract of land. Signed-off-by: -
Jay Vosburgh authored
Update ALB mode monitor to hold correct locks (RTNL and nothing else) when calling dev_set_promiscuity. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Jay Vosburgh <fubar@us.ibm.com> Signed-off-by:
-
Jay Vosburgh authored
Convert more lock acquisitions to _bh flavor to avoid deadlock with workqueue activity and add acquisition of RTNL in appropriate places. Affects ALB mode, as well as core bonding functions and sysfs. Signed-off-by:
-
Jay Vosburgh authored
Convert locking-related activity to new & improved system. Convert some lock acquisitions to _bh and rework parts of ALB mode, both to avoid deadlocks with workqueue activity. Signed-off-by:
-
Jay Vosburgh authored
Convert mii (link state) monitor to acquire correct locks for failover events. In particular, failovers generally require RTNL at a low level (when manipulating device MAC addresses, for example) and no other locks. The high level monitor is responsible for acquiring a known set of locks, RTNL, the bond->lock for read and the slave_lock for write, and the low level failover processing can then release appropriate locks as needed. This patch provides the high level portion. As it is undesirable to acquire RTNL for every monitor pass (which may occur as often as every 10 ms), the miimon has been converted to do conditional locking. A first pass inspects all slaves to determine if any action is required, and if so, a second pass (after acquring RTNL) is done to perform any actions (doing a complete rescan, as the situation may have changed when all locks were released). Signed-off-by:
-
Jay Vosburgh authored
Change locking in balance-rr transmit processing to use a free running counter to determine which slave to transmit on. Instead, a free-running counter is maintained, and modulo arithmetic used to select a slave for transmit. This removes lock operations from the TX path, and eliminates a deadlock introduced by the conversion to work queues. Signed-off-by:
-
Jay Vosburgh authored
Convert bonding timers to workqueues. This converts the various monitor functions to run in periodic work queues instead of timers. This patch introduces the framework and convers the calls, but does not resolve various locking issues, and does not stand alone. Signed-off-by:
-
