- 10 Jul, 2008 11 commits
-
-
Mark Brown authored
Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Manuel Lauss authored
Simple suspend/resume for AC97 ASoC codec. Signed-off-by:
Manuel Lauss <mano@roarinelk.homelinux.net> Acked-by:
Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by:
-
Mark Brown authored
DAPM supports adding a compile time configurable delay to the widget power sequences, aiding diagnosis of problems with pops and clicks being generated during them. This patch converts this to be configurable at run time via a sysfs file. Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mike Rapoport authored
Replace 'snd_ac97_write' with snd_ac97_write_cache' in pacth_ucb1400 to allow proper codec wakeup. Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
-
Takashi Iwai authored
Toshiba Satellite P105 with cx5045 has no HP pin but only a speaker pin and does the speaker-muting on hardware. Thus the matching model is laptop-micsense. Signed-off-by:
-
Takashi Iwai authored
Added the missing SSID of Thinkpad Z60m for model=thinkpad with AD1981HD. Signed-off-by:
-
Takashi Iwai authored
ALC883 medion model doesn't unmute the proper amps so no output can be heard. Replaced the mute switches to behave just like other models. Signed-off-by:
-
Jarkko Nikula authored
Signed-off-by:
Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by:
-
Takashi Iwai authored
Some laptops don't like PR3 powerdown. Do PR3 powerdown only for the real power-saving. Signed-off-by:
-
Walter Sheets authored
Signed-off-by:
Walter Sheets <w41ter@gmail.com> Signed-off-by:
-
- 27 Jun, 2008 4 commits
-
-
Jaroslav Kysela authored
Signed-off-by: -
Takashi Iwai authored
Some machines with Cx5045 seem to have no problem with the volume over 0dB on NID 0x17. Disable amp overrides for other devices but HP. Signed-off-by:
-
Takashi Iwai authored
YDSXGR_BUF441OUTVOL register isn't initialized properly. This may lead to a silent output at full volume of unchanged "Wave Playback Volume". http://bugzilla.kernel.org/show_bug.cgi?id=10963Signed-off-by:
-
Takashi Iwai authored
MacBook 3.1 is compatible with model=mbp3. Added the codec SSID 10b6:3600. Signed-off-by:
-
- 26 Jun, 2008 12 commits
-
-
Jarkko Nikula authored
Signed-off-by:
-
Jarkko Nikula authored
AIC33 and AIC34 codecs in TLV320AIC3x family support digital microphone input. When enabled, the codec ADC takes bitstream input to low-pass filter from GPIO2 instead of its own delta-sigma modulator while providing oversampling clock through GPIO1. Signed-off-by:
-
Jarkko Nikula authored
Those two serial data interface control register bits have also other functions and they can be set before aic3x_set_dai_fmt is called. Signed-off-by:
-
Jarkko Nikula authored
Signed-off-by:
-
Jarkko Nikula authored
This generic register modifier widget is for updating multiple codec register bits at once when the widget changes its power state. Signed-off-by:
-
Mark Brown authored
Several ASoC codec drivers use custom macros equivalent to the standard pr_ macros, most of which are not actually used. Replace these custom macros with the standard ones. Signed-off-by:
-
Richard Purdie authored
The AK4535 codec is included in some HP iPAQ systems. This driver was originally written by Richard Purdie and with some bug fixes from Milan Plzik. While out of tree it has also had some mechanical updates for new APIs and current best practices from Liam Girdwood, Graeme Gregory and Mark Brown. Signed-off-by:
Richard Purdie <richard@openedhand.com> Signed-off-by:
Milan Plzik <milan.plzik@gmail.com> Signed-off-by:
Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by:
-
Andreas Mohr authored
- fix problem with codec register 0x6a being write-only by adding a software shadow register (caused annoying noise after module loading due to _toggling_ between gameport and audio bits instead of configuring them properly) - rename several "Wave" mixer controls to "PCM", since this is what Wine and several other apps are looking for (IOW, _requiring_) and this is what AC97 specs use as naming, too, thus I'd guess it's what these controls are - cleanup, small optimizations Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Pierre Ossman authored
Stop the S/PDIF DMA engine and output when the device is told to pause. It will keep on looping the current buffer contents if this isn't done. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Tested-by:
Rene Herman <rene.herman@gmail.com> Signed-off-by:
-
Travis Place authored
Add the SSID for the "Fujitsu Siemens Amilo M1451G" laptop to patch_realtek.c , so that it uses ALC880_FUJITSU by default. Signed-off-by:
Travis Place <wishie@wishie.net> Signed-off-by:
-
Travis Place authored
Added the SSID of a known iMac 24" to automatically use ALC885_IMAC24 quirk. Signed-off-by:
-
Jaroslav Kysela authored
This reverts commit 36b34d2437104f323e09d7c6af6451d3c0b9c0cd. From: Al Viro <viro@ZenIV.linux.org.uk> WIW, *all* this stuff is not bitwise at all. For crying out loud, half of these types are routinely used as array indices and loop variables... If anything, we want a different set of allowed operations - subtraction between elements of type (yielding integer), addition/subtraction of integer types not bigger than ours (yielding our type), comparisons, assignments (=, +=, -=, passing to function as argument, return from function, initializers) and second/third arguments in ?:. With 0 *not* being allowed as a constant of such type. It's not bitwise; we may use the same infrastructure in sparse, but it should be a separate class of types (__attribute__((affine))). dma_addr_t is another candidate for the same treatment, but there we'll need helpers for conversions to hw-acceptable form (dma_to_le32(), etc.) and gradual conversion of drivers. ALSA ones and pm mess are absolutely straightforward cases, though. Signed-off-by:
-
- 20 Jun, 2008 1 commit
-
-
Takashi Iwai authored
AC_VERB_GET_DIGI_CONVERT_2 isn't actually implemented but reserved. The whole SIC bits are returned from DIGI_CONVERT_1. Signed-off-by:
-
- 19 Jun, 2008 1 commit
-
-
Harvey Harrison authored
Fully half of all alsa sparse warnings are from snd_pcm_hw_param_t degrading to integer type, this goes a long way towards eliminating them. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
- 18 Jun, 2008 4 commits
-
-
Randy Dunlap authored
Fix sound/soc build failure when CONFIG_PM=n: linux-next-20080617/sound/soc/soc-core.c:829: error: 'soc_resume_deferred' undeclared (first use in this function) soc3.out:make[3]: *** [sound/soc/soc-core.o] Error 1 Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Takashi Iwai authored
Added an entry for another MSI K8N Diamond mobo with SSID 1102:1009. Signed-off-by:
-
Takashi Iwai authored
Don't create mixer volume elements for Headphone and Speaker if they use the same DAC as normal line-outs on AD1988. Otherwise the amp value gets screwed up, e.g. https://bugzilla.novell.com/show_bug.cgi?id=398255Signed-off-by:
-
Timur Tabi authored
Fix the Freescale MPC8610 HPCD sound driver so that it programs the DMACR and PMUXCR registers in the global utilities correctly. Signed-off-by:
Timur Tabi <timur@freescale.com> Acked-by:
-
- 17 Jun, 2008 2 commits
-
-
Takashi Iwai authored
Clean up the previous commit for fixing memory leaks. Signed-off-by: -
Jaroslav Kysela authored
The leak was introduced in "[ALSA] emu10k1 - simplify page allocation for synth" commit. Signed-off-by:
-
- 16 Jun, 2008 5 commits
-
-
Jaroslav Kysela authored
But comment only extra code in ak4531_codec.c for history. Signed-off-by: -
Jaroslav Kysela authored
Signed-off-by: -
Takashi Iwai authored
Use the standard upper_32_bits() instead of own macro. Signed-off-by:
-
Takashi Iwai authored
Use bdl_pos_adj=32 as default except for Intel hardwares confirmed to work with bdl_pos_adj=1. Looks like ATI and NVidia require this higher value. Signed-off-by:
-
Andy Green authored
On OpenMoko soc-audio resume is taking 700ms of the whole resume time of 1.3s, dominated by writes to the codec over I2C. This patch shunts the resume guts into a workqueue which then is done asynchronously. The "card" is locked using the ALSA power state APIs as suggested by Mark Brown. [Added fix for race with resume to suspend and fixed a couple of nits from checkpatch -- broonie.] Signed-off-by:
Andy Green <andy@openmoko.com> Signed-off-by:
-
