Skip to content

L
linux-davinci
Switch branch/tag
  1. 06 May, 2009 6 commits
  3. 05 May, 2009 24 commits
  5. 04 May, 2009 10 commits
    • Stephen Smalley's avatar
      selinux: Fix send_sigiotask hook · 65c90bca
      Stephen Smalley authored 
      The CRED patch incorrectly converted the SELinux send_sigiotask hook to
use the current task SID rather than the target task SID in its
permission check, yielding the wrong permission check.  This fixes the
hook function.  Detected by the ltp selinux testsuite and confirmed to
correct the test failure.
Signed-off-by: default avatarStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: default avatarJames Morris <jmorris@namei.org>
      65c90bca
    • Jake Edge's avatar
      proc: avoid information leaks to non-privileged processes · f83ce3e6
      Jake Edge authored 
      By using the same test as is used for /proc/pid/maps and /proc/pid/smaps,
only allow processes that can ptrace() a given process to see information
that might be used to bypass address space layout randomization (ASLR).
These include eip, esp, wchan, and start_stack in /proc/pid/stat as well
as the non-symbolic output from /proc/pid/wchan.

ASLR can be bypassed by sampling eip as shown by the proof-of-concept
code at http://code.google.com/p/fuzzyaslr/ As part of a presentation
(http://www.cr0.org/paper/to-jt-linux-alsr-leak.pdf) esp and wchan were
also noted as possibly usable information leaks as well.  The
start_stack address also leaks potentially useful information.

Cc: Stable Team <stable@kernel.org>
Signed-off-by: default avatarJake Edge <jake@lwn.net>
Acked-by: default avatarArjan van de Ven <arjan@linux.intel.com>
Acked-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f83ce3e6
    • Marcel Holtmann's avatar
      Bluetooth: Fix issue with sysfs handling for connections · a67e899c
      Marcel Holtmann authored 
      Due to a semantic changes in flush_workqueue() the current approach of
synchronizing the sysfs handling for connections doesn't work anymore. The
whole approach is actually fully broken and based on assumptions that are
no longer valid.

With the introduction of Simple Pairing support, the creation of low-level
ACL links got changed. This change invalidates the reason why in the past
two independent work queues have been used for adding/removing sysfs
devices. The adding of the actual sysfs device is now postponed until the
host controller successfully assigns an unique handle to that link. So
the real synchronization happens inside the controller and not the host.

The only left-over problem is that some internals of the sysfs device
handling are not initialized ahead of time. This leaves potential access
to invalid data and can cause various NULL pointer dereferences. To fix
this a new function makes sure that all sysfs details are initialized
when an connection attempt is made. The actual sysfs device is only
registered when the connection has been successfully established. To
avoid a race condition with the registration, the check if a device is
registered has been moved into the removal work.

As an extra protection two flush_work() calls are left in place to
make sure a previous add/del work has been completed first.

Based on a report by Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Tested-by: default avatarJustin P. Mattock <justinmattock@gmail.com>
Tested-by: default avatarRoger Quadros <ext-roger.quadros@nokia.com>
Tested-by: default avatarMarc Pignat <marc.pignat@hevs.ch>
      a67e899c
    • Omar Laazimani's avatar
      usbnet: CDC EEM support (v5) · 9f722c09
      Omar Laazimani authored 
      This introduces a CDC Ethernet Emulation Model (EEM) host side
driver to support USB EEM devices.

EEM is different from the Ethernet Control Model (ECM) currently
supported by the "CDC Ethernet" driver.  One key difference is
that it doesn't require of USB interface alternate settings to
manage interface state; some maldesigned hardware can't handle
that part of USB.  It also avoids a separate USB interface for
control and status updates.

[ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet
checks, improve fault handling, EEM conformance updates, cleanup ]
Signed-off-by: default avatarOmar Laazimani <omar.oberthur@gmail.com>
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9f722c09
    • Andreas Herrmann's avatar
      x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo · 35d11680
      Andreas Herrmann authored 
      Commit 7ad728f9
(cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t)
changed the output of /proc/cpuinfo for siblings:

Example on an AMD Phenom:

  physical id   : 0
  siblings : 1
  core id	   : 3
  cpu cores  : 4

Before that commit it was:

  physical id	: 0
  siblings : 4
  core id	   : 3
  cpu cores  : 4

Instead of cpu_core_mask it now uses cpu_sibling_mask to count siblings.
This is due to the following hunk of above commit:

|  --- a/arch/x86/kernel/cpu/proc.c
|  +++ b/arch/x86/kernel/cpu/proc.c
|  @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinf
|          if (c->x86_max_cores * smp_num_siblings > 1) {
|                  seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
|                  seq_printf(m, "siblings\t: %d\n",
|  -                          cpus_weight(per_cpu(cpu_core_map, cpu)));
|  +                          cpumask_weight(cpu_sibling_mask(cpu)));
|                  seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
|                  seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
|                  seq_printf(m, "apicid\t\t: %d\n", c->apicid);

This was a mistake, because the impact line shows that this side-effect
was not anticipated:

   Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y

So revert the respective hunk to restore the old behavior.

[ Impact: fix sibling-info regression in /proc/cpuinfo ]
Signed-off-by: default avatarAndreas Herrmann <andreas.herrmann3@amd.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <20090504182859.GA29045@alberich.amd.com>
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
      35d11680
    • Satoru SATOH's avatar
      tcp: Fix tcp_prequeue() to get correct rto_min value · 0c266898
      Satoru SATOH authored 
      tcp_prequeue() refers to the constant value (TCP_RTO_MIN) regardless of
the actual value might be tuned. The following patches fix this and make
tcp_prequeue get the actual value returns from tcp_rto_min().
Signed-off-by: default avatarSatoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0c266898
    • Hannes Hering's avatar
      ehea: fix invalid pointer access · 0b2febf3
      Hannes Hering authored 
      This patch fixes an invalid pointer access in case the receive queue
holds no pointer to the next skb when the queue is empty.
Signed-off-by: default avatarHannes Hering <hering2@de.ibm.com>
Signed-off-by: default avatarJan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0b2febf3
    • Takashi Iwai's avatar
      Merge branch 'fix/misc' into for-linus · 5d7ee52f
      Takashi Iwai authored 
      * fix/misc:
  ALSA: indigo-express: add missing 64KHz flags
      5d7ee52f
    • Takashi Iwai's avatar
      Merge branch 'fix/asoc' into for-linus · dea6a9d3
      Takashi Iwai authored 
      * fix/asoc:
  ASoC: Remove BROKEN from mpc5200 kconfig
  ASoC: TWL4030: Fix gain control for earpiece amplifier
  ASoC: Set the MPC5200 i2s driver to BROKEN status.
  ASoC: Fix logic in WM8350 master clocking check
      dea6a9d3
    • Takashi Iwai's avatar
      Merge branch 'fix/pcm-jiffies-check' into for-linus · 56dc16f7
      Takashi Iwai authored 
      * fix/pcm-jiffies-check:
  ALSA: pcm core - Avoid jiffies check for devices with BATCH flag
  ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some drivers
      56dc16f7