1. 07 Dec, 2006 13 commits
    • Paul Jackson's avatar
      [PATCH] memory page_alloc zonelist caching reorder structure · 7253f4ef
      Paul Jackson authored
      Rearrange the struct members in the 'struct zonelist_cache' structure, so
      as to put the readonly (once initialized) z_to_n[] array first, where it
      will come right after the zones[] array in struct zonelist.
      
      This pretty much eliminates the chance that the two frequently written
      elements of 'struct zonelist_cache', the fullzones bitmap and last_full_zap
      times, will end up on the same cache line as the performance sensitive,
      frequently read, never (after init) written zones[] array.
      
      Keeping frequently written data off frequently read cache lines is good for
      performance.
      
      Thanks to Rohit Seth for the suggestion.
      Signed-off-by: default avatarPaul Jackson <pj@sgi.com>
      Cc: Rohit Seth <rohitseth@google.com>
      Cc: Paul Menage <menage@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      7253f4ef
    • Paul Jackson's avatar
      [PATCH] memory page_alloc zonelist caching speedup · 9276b1bc
      Paul Jackson authored
      Optimize the critical zonelist scanning for free pages in the kernel memory
      allocator by caching the zones that were found to be full recently, and
      skipping them.
      
      Remembers the zones in a zonelist that were short of free memory in the
      last second.  And it stashes a zone-to-node table in the zonelist struct,
      to optimize that conversion (minimize its cache footprint.)
      
      Recent changes:
      
          This differs in a significant way from a similar patch that I
          posted a week ago.  Now, instead of having a nodemask_t of
          recently full nodes, I have a bitmask of recently full zones.
          This solves a problem that last weeks patch had, which on
          systems with multiple zones per node (such as DMA zone) would
          take seeing any of these zones full as meaning that all zones
          on that node were full.
      
          Also I changed names - from "zonelist faster" to "zonelist cache",
          as that seemed to better convey what we're doing here - caching
          some of the key zonelist state (for faster access.)
      
          See below for some performance benchmark results.  After all that
          discussion with David on why I didn't need them, I went and got
          some ;).  I wanted to verify that I had not hurt the normal case
          of memory allocation noticeably.  At least for my one little
          microbenchmark, I found (1) the normal case wasn't affected, and
          (2) workloads that forced scanning across multiple nodes for
          memory improved up to 10% fewer System CPU cycles and lower
          elapsed clock time ('sys' and 'real').  Good.  See details, below.
      
          I didn't have the logic in get_page_from_freelist() for various
          full nodes and zone reclaim failures correct.  That should be
          fixed up now - notice the new goto labels zonelist_scan,
          this_zone_full, and try_next_zone, in get_page_from_freelist().
      
      There are two reasons I persued this alternative, over some earlier
      proposals that would have focused on optimizing the fake numa
      emulation case by caching the last useful zone:
      
       1) Contrary to what I said before, we (SGI, on large ia64 sn2 systems)
          have seen real customer loads where the cost to scan the zonelist
          was a problem, due to many nodes being full of memory before
          we got to a node we could use.  Or at least, I think we have.
          This was related to me by another engineer, based on experiences
          from some time past.  So this is not guaranteed.  Most likely, though.
      
          The following approach should help such real numa systems just as
          much as it helps fake numa systems, or any combination thereof.
      
       2) The effort to distinguish fake from real numa, using node_distance,
          so that we could cache a fake numa node and optimize choosing
          it over equivalent distance fake nodes, while continuing to
          properly scan all real nodes in distance order, was going to
          require a nasty blob of zonelist and node distance munging.
      
          The following approach has no new dependency on node distances or
          zone sorting.
      
      See comment in the patch below for a description of what it actually does.
      
      Technical details of note (or controversy):
      
       - See the use of "zlc_active" and "did_zlc_setup" below, to delay
         adding any work for this new mechanism until we've looked at the
         first zone in zonelist.  I figured the odds of the first zone
         having the memory we needed were high enough that we should just
         look there, first, then get fancy only if we need to keep looking.
      
       - Some odd hackery was needed to add items to struct zonelist, while
         not tripping up the custom zonelists built by the mm/mempolicy.c
         code for MPOL_BIND.  My usual wordy comments below explain this.
         Search for "MPOL_BIND".
      
       - Some per-node data in the struct zonelist is now modified frequently,
         with no locking.  Multiple CPU cores on a node could hit and mangle
         this data.  The theory is that this is just performance hint data,
         and the memory allocator will work just fine despite any such mangling.
         The fields at risk are the struct 'zonelist_cache' fields 'fullzones'
         (a bitmask) and 'last_full_zap' (unsigned long jiffies).  It should
         all be self correcting after at most a one second delay.
      
       - This still does a linear scan of the same lengths as before.  All
         I've optimized is making the scan faster, not algorithmically
         shorter.  It is now able to scan a compact array of 'unsigned
         short' in the case of many full nodes, so one cache line should
         cover quite a few nodes, rather than each node hitting another
         one or two new and distinct cache lines.
      
       - If both Andi and Nick don't find this too complicated, I will be
         (pleasantly) flabbergasted.
      
       - I removed the comment claiming we only use one cachline's worth of
         zonelist.  We seem, at least in the fake numa case, to have put the
         lie to that claim.
      
       - I pay no attention to the various watermarks and such in this performance
         hint.  A node could be marked full for one watermark, and then skipped
         over when searching for a page using a different watermark.  I think
         that's actually quite ok, as it will tend to slightly increase the
         spreading of memory over other nodes, away from a memory stressed node.
      
      ===============
      
      Performance - some benchmark results and analysis:
      
      This benchmark runs a memory hog program that uses multiple
      threads to touch alot of memory as quickly as it can.
      
      Multiple runs were made, touching 12, 38, 64 or 90 GBytes out of
      the total 96 GBytes on the system, and using 1, 19, 37, or 55
      threads (on a 56 CPU system.)  System, user and real (elapsed)
      timings were recorded for each run, shown in units of seconds,
      in the table below.
      
      Two kernels were tested - 2.6.18-mm3 and the same kernel with
      this zonelist caching patch added.  The table also shows the
      percentage improvement the zonelist caching sys time is over
      (lower than) the stock *-mm kernel.
      
            number     2.6.18-mm3	   zonelist-cache    delta (< 0 good)	percent
       GBs    N  	------------	   --------------    ----------------	systime
       mem threads   sys user  real	  sys  user  real     sys  user  real	 better
        12	 1     153   24   177	  151	 24   176      -2     0    -1	   1%
        12	19	99   22     8	   99	 22	8	0     0     0	   0%
        12	37     111   25     6	  112	 25	6	1     0     0	  -0%
        12	55     115   25     5	  110	 23	5      -5    -2     0	   4%
        38	 1     502   74   576	  497	 73   570      -5    -1    -6	   0%
        38	19     426   78    48	  373	 76    39     -53    -2    -9	  12%
        38	37     544   83    36	  547	 82    36	3    -1     0	  -0%
        38	55     501   77    23	  511	 80    24      10     3     1	  -1%
        64	 1     917  125  1042	  890	124  1014     -27    -1   -28	   2%
        64	19    1118  138   119	  965	141   103    -153     3   -16	  13%
        64	37    1202  151    94	 1136	150    81     -66    -1   -13	   5%
        64	55    1118  141    61	 1072	140    58     -46    -1    -3	   4%
        90	 1    1342  177  1519	 1275	174  1450     -67    -3   -69	   4%
        90	19    2392  199   192	 2116	189   176    -276   -10   -16	  11%
        90	37    3313  238   175	 2972	225   145    -341   -13   -30	  10%
        90	55    1948  210   104	 1843	213   100    -105     3    -4	   5%
      
      Notes:
       1) This test ran a memory hog program that started a specified number N of
          threads, and had each thread allocate and touch 1/N'th of
          the total memory to be used in the test run in a single loop,
          writing a constant word to memory, one store every 4096 bytes.
          Watching this test during some earlier trial runs, I would see
          each of these threads sit down on one CPU and stay there, for
          the remainder of the pass, a different CPU for each thread.
      
       2) The 'real' column is not comparable to the 'sys' or 'user' columns.
          The 'real' column is seconds wall clock time elapsed, from beginning
          to end of that test pass.  The 'sys' and 'user' columns are total
          CPU seconds spent on that test pass.  For a 19 thread test run,
          for example, the sum of 'sys' and 'user' could be up to 19 times the
          number of 'real' elapsed wall clock seconds.
      
       3) Tests were run on a fresh, single-user boot, to minimize the amount
          of memory already in use at the start of the test, and to minimize
          the amount of background activity that might interfere.
      
       4) Tests were done on a 56 CPU, 28 Node system with 96 GBytes of RAM.
      
       5) Notice that the 'real' time gets large for the single thread runs, even
          though the measured 'sys' and 'user' times are modest.  I'm not sure what
          that means - probably something to do with it being slow for one thread to
          be accessing memory along ways away.  Perhaps the fake numa system, running
          ostensibly the same workload, would not show this substantial degradation
          of 'real' time for one thread on many nodes -- lets hope not.
      
       6) The high thread count passes (one thread per CPU - on 55 of 56 CPUs)
          ran quite efficiently, as one might expect.  Each pair of threads needed
          to allocate and touch the memory on the node the two threads shared, a
          pleasantly parallizable workload.
      
       7) The intermediate thread count passes, when asking for alot of memory forcing
          them to go to a few neighboring nodes, improved the most with this zonelist
          caching patch.
      
      Conclusions:
       * This zonelist cache patch probably makes little difference one way or the
         other for most workloads on real numa hardware, if those workloads avoid
         heavy off node allocations.
       * For memory intensive workloads requiring substantial off-node allocations
         on real numa hardware, this patch improves both kernel and elapsed timings
         up to ten per-cent.
       * For fake numa systems, I'm optimistic, but will have to leave that up to
         Rohit Seth to actually test (once I get him a 2.6.18 backport.)
      Signed-off-by: default avatarPaul Jackson <pj@sgi.com>
      Cc: Rohit Seth <rohitseth@google.com>
      Cc: Christoph Lameter <clameter@engr.sgi.com>
      Cc: David Rientjes <rientjes@cs.washington.edu>
      Cc: Paul Menage <menage@google.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      9276b1bc
    • Christoph Lameter's avatar
      [PATCH] Get rid of zone_table[] · 89689ae7
      Christoph Lameter authored
      The zone table is mostly not needed.  If we have a node in the page flags
      then we can get to the zone via NODE_DATA() which is much more likely to be
      already in the cpu cache.
      
      In case of SMP and UP NODE_DATA() is a constant pointer which allows us to
      access an exact replica of zonetable in the node_zones field.  In all of
      the above cases there will be no need at all for the zone table.
      
      The only remaining case is if in a NUMA system the node numbers do not fit
      into the page flags.  In that case we make sparse generate a table that
      maps sections to nodes and use that table to to figure out the node number.
       This table is sized to fit in a single cache line for the known 32 bit
      NUMA platform which makes it very likely that the information can be
      obtained without a cache miss.
      
      For sparsemem the zone table seems to be have been fairly large based on
      the maximum possible number of sections and the number of zones per node.
      There is some memory saving by removing zone_table.  The main benefit is to
      reduce the cache foootprint of the VM from the frequent lookups of zones.
      Plus it simplifies the page allocator.
      
      [akpm@osdl.org: build fix]
      Signed-off-by: default avatarChristoph Lameter <clameter@sgi.com>
      Cc: Dave Hansen <haveblue@us.ibm.com>
      Cc: Andy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      89689ae7
    • Chen, Kenneth W's avatar
      [PATCH] __unmap_hugepage_range(): add comment · c0a499c2
      Chen, Kenneth W authored
      Signed-off-by: default avatarKen Chen <kenneth.w.chen@intel.com>
      Cc: David Gibson <david@gibson.dropbear.id.au>
      Cc: Hugh Dickins <hugh@veritas.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      c0a499c2
    • Paul Jackson's avatar
      [PATCH] memory page alloc minor cleanups · 0798e519
      Paul Jackson authored
      - s/freeliest/freelist/ spelling fix
      
      - Check for NULL *z zone seems useless - even if it could happen, so
        what?  Perhaps we should have a check later on if we are faced with an
        allocation request that is not allowed to fail - shouldn't that be a
        serious kernel error, passing an empty zonelist with a mandate to not
        fail?
      
      - Initializing 'z' to zonelist->zones can wait until after the first
        get_page_from_freelist() fails; we only use 'z' in the wakeup_kswapd()
        loop, so let's initialize 'z' there, in a 'for' loop.  Seems clearer.
      
      - Remove superfluous braces around a break
      
      - Fix a couple errant spaces
      
      - Adjust indentation on the cpuset_zone_allowed() check, to match the
        lines just before it -- seems easier to read in this case.
      
      - Add another set of braces to the zone_watermark_ok logic
      
      From: Paul Jackson <pj@sgi.com>
      
        Backout one item from a previous "memory page_alloc minor cleanups" patch.
         Until and unless we are certain that no one can ever pass an empty zonelist
        to __alloc_pages(), this check for an empty zonelist (or some BUG
        equivalent) is essential.  The code in get_page_from_freelist() blow ups if
        passed an empty zonelist.
      Signed-off-by: default avatarPaul Jackson <pj@sgi.com>
      Acked-by: default avatarChristoph Lameter <clameter@sgi.com>
      Cc: Nick Piggin <nickpiggin@yahoo.com.au>
      Signed-off-by: default avatarPaul Jackson <pj@sgi.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      0798e519
    • Andrew Morton's avatar
      [PATCH] uml: workqueue build fix · a2ce7740
      Andrew Morton authored
        arch/um/drivers/chan_kern.c:643: error: conflicting types for 'chan_interrupt'
        arch/um/include/chan_kern.h:31: error: previous declaration of 'chan_interrupt'
      
      Cc: David Howells <dhowells@redhat.com>
      Cc: Jeff Dike <jdike@addtoit.com>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      a2ce7740
    • Andrey Mirkin's avatar
      [PATCH] skip data conversion in compat_sys_mount when data_page is NULL · 822191a2
      Andrey Mirkin authored
      OpenVZ Linux kernel team has found a problem with mounting in compat mode.
      
      Simple command "mount -t smbfs ..." on Fedora Core 5 distro in 32-bit mode
      leads to oops:
      
        Unable to handle kernel NULL pointer dereference at 0000000000000000 RIP: compat_sys_mount+0xd6/0x290
        Process mount (pid: 14656, veid=300, threadinfo ffff810034d30000, task ffff810034c86bc0)
        Call Trace: ia32_sysret+0x0/0xa
      
      The problem is that data_page pointer can be NULL, so we should skip data
      conversion in this case.
      Signed-off-by: default avatarAndrey Mirkin <amirkin@openvz.org>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      822191a2
    • Andrew Morton's avatar
      [PATCH] drm-sis linkage fix · a1e85378
      Andrew Morton authored
      Fix http://bugzilla.kernel.org/show_bug.cgi?id=7606
      
      WARNING: "drm_sman_set_manager" [drivers/char/drm/sis.ko] undefined!
      
      Cc: <daniel-silveira@gee.inatel.br>
      Cc: Dave Airlie <airlied@linux.ie>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      a1e85378
    • Andrew Morton's avatar
      [PATCH] add bottom_half.h · 676dcb8b
      Andrew Morton authored
      With CONFIG_SMP=n:
      
        drivers/input/ff-memless.c:384: warning: implicit declaration of function 'local_bh_disable'
        drivers/input/ff-memless.c:393: warning: implicit declaration of function 'local_bh_enable'
      
      Really linux/spinlock.h should include linux/interrupt.h.  But interrupt.h
      includes sched.h which will need spinlock.h.
      
      So the patch breaks the _bh declarations out into a separate header and
      includes it in both interrupt.h and spinlock.h.
      
      Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
      Cc: Andi Kleen <ak@suse.de>
      Cc: <stable@kernel.org>
      Cc: Ingo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      676dcb8b
    • Jesper Juhl's avatar
      [PATCH] A few small additions and corrections to README · 620034c8
      Jesper Juhl authored
      Here's a small patch which
      
       - adds a few archs to the current list of supported platforms.
       - adds a few missing slashes at the end of URLs.
       - adds a few references to additional documentation.
       - adds "make config" to the list of possible configuration targets.
       - makes a few other minor changes.
      Signed-off-by: default avatarJesper Juhl <jesper.juhl@gmail.com>
      [ Ben Nizette <ben.nizette@iinet.net.au> points out AVR32 arch too ]
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      620034c8
    • Jesper Juhl's avatar
      [PATCH] Clean up 'make help' output for documentation targets. · 6fc52f81
      Jesper Juhl authored
      Here's a patch that cleans up the "make help" output a bit for the
      documentation targets.
      
      Currently the documentation targets are listed completely different than
      all the other targets :
      
        Documentation targets:
          Linux kernel internal documentation in different formats:
          xmldocs (XML DocBook), psdocs (Postscript), pdfdocs (PDF)
          htmldocs (HTML), mandocs (man pages, use installmandocs to install)
      
      with this patch they are more in line with the rest of the output :
      
        Documentation targets:
         Linux kernel internal documentation in different formats:
          htmldocs        - HTML
          installmandocs  - install man pages generated by mandocs
          mandocs         - man pages
          pdfdocs         - PDF
          psdocs          - Postscript
          xmldocs         - XML DocBook
      Signed-off-by: default avatarJesper Juhl <jesper.juhl@gmail.com>
      Acked-by: default avatarRandy Dunlap <randy.dunlap@oracle.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
      6fc52f81
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus · 3f5e573a
      Linus Torvalds authored
      * 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
        [MIPS] Import updates from i386's i8259.c
        [MIPS] *-berr: Header inclusions for DEC bus error handlers
        [MIPS] Compile __do_IRQ() when really needed
        [MIPS] genirq: use name instead of typename
        [MIPS] Do not use handle_level_irq for ioasic_dma_irq_type.
        [MIPS] pte_offset(dir,addr): parenthesis fix
      3f5e573a
    • Linus Torvalds's avatar
      Merge branch 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6 · 9232d587
      Linus Torvalds authored
      * 'release' of master.kernel.org:/home/ftp/pub/scm/linux/kernel/git/aegl/linux-2.6:
        [IA64] Fix pci.c kernel compilation breakage.
      9232d587
  2. 06 Dec, 2006 27 commits