OMAP_GPIO_SIWTCH is optional, so omap_reister_gpio_switches will be null.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

If the get_cover_state is not set, it occurs the oops.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Misc minor clean-up for upstream merge
Signed-off-by: Tony Lindgren <tony@atomide.com>

Clean up memory allocation return values
Signed-off-by: Tony Lindgren <tony@atomide.com>

Move dspgateway to drivers/dsp/dspgateway
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove arch-arm/plat-omap/dsp/dsp_common.h, and move
definitions to include/asm-arm/arch-omap/dsp_common.h.

This is done in order to prepare dsp for moving to live
under drivers. No functional changes.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge branches 'master' and 'linus'

Add support for 2k Page nand with Enabled HW ECC on omap2430 v4.0. and v5. It has been Tested with Micron Nand.

Signed-off-by: Shahrom Sharif-Kashani <sshahrom <at> micron.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add support for 2k Page nand with Enabled HW ECC on omap2430
v4.0. and v5. It has been Tested with Micron Nand.
Signed-off-by: Shahrom Sharif-Kashani <sshahrom@micron.com>

Moved defines from nand.h to omap2.c, cleaned up spacing and
comments a bit.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Build fixes for the tsc210x driver.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

Fix init section warnings in the new i2c init code.  It's
wrong to call "__init" functions from non-__init ones.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enables MMC/SD card support option on n800_defconfig to use MMC multislot support.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>

Refreshed to apply after Lauri's patch. Also left out
CONFIG_MMC_BLOCK_BOUNCE as omap MMC supports SG.
Signed-off-by: Tony Lindgren <tony@atomide.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: reverse inline-data truncate args
  ocfs2: Fix comparison in ocfs2_size_fits_inline_data()
  ocfs2: Remove bug statement in ocfs2_dentry_iput()
  [PATCH] ocfs2: Remove expensive bitmap scanning
  ocfs2: log valid inode # on bad inode
  ocfs2: Filter -ENOSPC in mlog_errno()
  [PATCH] fs/ocfs2: Add missing "space"
  ocfs2: Reset journal parameters after s_mount_opt update

* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: Update sys_rt_sigsuspend
  m32r: Ignore warnings for unused syscalls
  m32r: Add missing syscalls

Removing duplicated and unused files from camera driver
for omap1.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

camera_device_unregister expected the argument to be its own
device structure but it's actually that of its slave.

Also get master from slave's structure in camera_device_register.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch updates the camera_core.[c,h] to use corretly the new
v4l2 videobuf API.

Also removes VIDEO_BUF reference from Kconfig and adds the correct
dependencies.
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch should be dropped once the official machine type
is available in the tree.
Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enable N810 and lzo support for jffs2.
Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Built alongside N800 sharing most of the init code through
board-n800.h. Bootloader tag array size is increased from
512 to 1024.

Many drivers are still missing or don't work correctly,
but at least serial console is functional and jffs2 works
with lzo compression.
Signed-off-by: Lauri Leukkunen <lauri.leukkunen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fixes to make host features work again
Signed-off-by: Tony Lindgren <tony@atomide.com>

Make board-h2.c file uses new board-h2-mmc.c code.

This patch also:
- Introduces a new gpio_switch to get events when inserting and removing
  MMC/SD/SDIO cards to/from the slot.
- Enables the following options on omap_h2_1610_defconfig to use
  multislot support:
  - GPIO switch support
  - MMC/SD card support
  - VFAT fs support
  - NLS ISO 8859-1
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Proposes the new board-h2-mmc.c file to handle all the mmc
specific code for multislot support.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Make board-h3.c file uses new board-h3-mmc.c code.

This patch also:
- Introduces a new gpio_switch to get events when inserting and removing
  MMC/SD/SDIO cards to/from the slot.
- Enables the following options on omap_h3_1710_defconfig to use
  multislot support:
  - GPIO switch support
  - MSDOS fs support
  - VFAT fs support
  - Codepage 437
  - NLS ISO 8859-1
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Proposes the new board-h3-mmc.c file to handle all the mmc
specific code for multislot support.
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Enables MMC/SD card support option on n800_defconfig to use MMC multislot support.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Modifications at board-n800-mmc.c and board-n800.c files to work with MMC multislot support.
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Modifications at arch/arm/plat-omap/devices.c and include/asm-arm/arch-omap/mmc.h
to use multislot structures.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Using setup_timer() instead of init_timer on omap.c file.
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

When a card is removed while it is being accessed, a command can get stuck so
that no timeout or end of command interrupt ever occurs. The command getting
stuck is almost always CDM12, but also the other commands can get stuck. Catch
a stuck command with a timer and try sending the initiliazation stream until
the controller starts running again and responds with the end of command
status.
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

General code cleanup, modifications at some dev_* functions and
other hacks at mmc_omap_irq() for MMC multislot support.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Modifications at power functions to MMC multislot support. This patch
also move board-specific code out of MMC OMAP driver.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix the data timeout calculation for MMC multislot support.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

New functions to support MMC multislot:
mmc_omap_release_dma() and mmc_omap_abort_xfer().
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds back MMC cover switch support in a way that
supports multiple slots.
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>

Introduce new MMC multislot structure and change driver to use it.

Note that MMC clocking is now enabled in mmc_omap_select_slot()
and disabled in mmc_omap_release_slot().
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch removes the MMC cover switch handling temporarily
to make following multislot patches cleaner.

MMC cover switch handling will be added back in later patches
after adding basic multislot support.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Attribution necessary only if the ch is not chained on arch/arm/plat-omap/dma.c
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Ragner Magalhaes <ragner.magalhaes@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

ocfs2_truncate() and ocfs2_remove_inode_range() had reversed their "set
i_size" arguments to ocfs2_truncate_inline(). Fix things so that truncate
sets i_size, and punching a hole ignores it.

This exposed a problem where punching a hole in an inline-data file wasn't
updating the page cache, so fix that too.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>

This was causing us to prematurely push out inline data by one byte.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>