- 12 Oct, 2007 40 commits
-
-
Christof Schmitt authored
zfcp_adapter_enqueue initialized adapter->ccw_device twice with the same value. Remove the second assignment, since it is not necessary. Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Heiko Carstens authored
Avoid "if (whatever) ;" constructs since they seem to confuse people, even if there is a comment. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
correct indentation for nested if-else Signed-off-by:
-
Mariusz Kozlowski authored
In NCR_D700, a4000t, aic7xxx_old, bvme6000, dpt_i2o, gdth, lpfc, megaraid, mvme16x osst, pluto, qla2xxx, zorro7xx Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by:
-
Prakash, Sathya authored
Recently LSI Logic Corp was renamed as LSI Corp, so whereever there is a reference of LSI Logic, it is changed to LSI in mpt fusion driver code. signed-off-by:
Sathya Prakash <sathya.prakash@lsi.com> Acked-by:
Eric Moore <Eric.Moore@lsi.com> Signed-off-by:
-
Prakash, Sathya authored
When there is state change in FC links, a message is displayed with old and new link speed. signed-off-by:
-
Prakash, Sathya authored
The data structure definitions from mptsas.c are moved to a new header file mptsas.h signed-off-by:
-
Prakash, Sathya authored
The call back index requires only u8 but in lot of places it is referred as int, now everywhere the call back index variables are declared as u8 with uniform name cb_idx signed-off-by:
-
Prakash, Sathya authored
Added support for sending the task management requests through High priority request FIFO instead of Doorbell writes when firmware support High priority FIFO. signed-off-by:
-
Eric Moore authored
Per request from Matthew Wilcox - using PCI_VENDOR_ATTO. Add support for ATTO UL4D, they are rebranded 53C1030. The changes are 1. Adding a new PCI vendor ID in pci table 2. The spi_port_page_2 is in different format than that of LSI generic spi_port_page_2 and hence mapping code is added. signed-off-by:
-
Eric Moore authored
A new PCI_VENDOR_ID for pci_ids.h. signed-off-by:
-
Alan Cox authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Gabriel C authored
In file included from drivers/scsi/g_NCR5380_mmio.c:9: drivers/scsi/g_NCR5380.c:559:5: warning: "NCR53C400_PSEUDO_DMA" is not defined Signed-off-by:
Gabriel Craciunescu <nix.or.die@googlemail.com> Signed-off-by:
-
Adrian Bunk authored
Every file should #include the headers containing the prototypes for its global functions (in this case for scsi_schedule_eh()). Signed-off-by:
-
Andrew Morton authored
drivers/scsi/ips.c: In function 'ips_insert_device': drivers/scsi/ips.c:6957: warning: 'index' may be used uninitialized in this function Signed-off-by:
-
Jesper Juhl authored
Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Acked-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
Andrew Morton authored
Too generic, clashes with ISDN. Signed-off-by:
Mark Salyzyn <aacraid@adaptec.com> Signed-off-by:
-
Jesper Juhl authored
The Coverity checker noticed that we may overrun a statically allocated array in drivers/scsi/lpfc/lpfc_sli.c::lpfc_sli_hbqbuf_find(). The case is this; In 'struct lpfc_hba' we have #define LPFC_MAX_HBQS 4 ... struct lpfc_hba { ... struct hbq_s hbqs[LPFC_MAX_HBQS]; ... }; But then in lpfc_sli_hbqbuf_find() we have this code hbqno = tag >> 16; if (hbqno > LPFC_MAX_HBQS) return NULL; if 'hbqno' ends up as exactely 4, then we won't return, and then this list_for_each_entry(d_buf, &phba->hbqs[hbqno].hbq_buffer_list, list) { will cause an overflow of the statically allocated array at index 4, since the valid indices are only 0-3. I propose this patch, that simply changes the 'hbqno > LPFC_MAX_HBQS' into 'hbqno >= LPFC_MAX_HBQS' as a possible fix. Signed-off-by: -
FUJITA Tomonori authored
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
Matthew Wilcox authored
The 700+-line comment at the top of the advansys driver fits more comfortably in Documentation/scsi. Delete the sections on: - kernels supported - other files modified (obsolete) - source comments (obsolete) - tests to run - release history (that's what a VCS is for) - contacting connectcom (the domain has expired and the phone number is now in use by another organisation) Known problems/fix list is moved down to the section where jejb put his FIXME. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Matthew Wilcox authored
Use memcpy to initialise eep_config instead of a loop. For AdvInitFrom38C1600EEP where we need to modify the default EEPROM configuration, do it after the loop, and do it using the structure definition, not by finding the right byte. I think it was wrong for big-endian machines. Also delete some non-useful comments and prototypes. Signed-off-by:
-
Matthew Wilcox authored
The driver kept a copy of the PCI config address; refer to the pci_dev associated with the card instead. Signed-off-by:
-
Matthew Wilcox authored
Convert adv_isr_callback, adv_async_callback and asc_isr_callback into direct calls. Remove the unused asc_exe_callback. Signed-off-by:
-
Matthew Wilcox authored
The cfg structures are supposed to be disposable after initialisation; with the 'dev' used for DMA mapping in there, that's not possible. Move the dev to the board. Also inline AscInitFromAscDvcVar into its only caller, remove some unnecessary prototypes and sort out a few minor formatting issues. Signed-off-by:
-
Matthew Wilcox authored
n_io_port isn't suitable for advansys because some of the boards have more than 255 bytes of io port space. There's already a driver-private replacement, asc_n_io_port, but for some reason the driver was still setting and occasionally reporting n_io_port. Signed-off-by:
-
Matthew Wilcox authored
At some point during Linux 2.1 development, ioremap() gained the ability to handle addresses which weren't page-aligned. Also expand the CONFIG_PCI range to encompass that entire section of wide board initialisation, since all wide boards are PCI. Signed-off-by:
-
Matthew Wilcox authored
By moving a test from AscGetChipBusType into its only caller, we can delete the whole function Signed-off-by:
-
Matthew Wilcox authored
Remove some useless forward declarations Reformat some comments, debug messages, and the occasional piece of real code Removal of unnecessary braces Remove duplicate setting of shost->irq Signed-off-by:
-
Matthew Wilcox authored
Use slave_configure() to do all the work that used to be done in AscInquiryHandling and AdvInquiryHandling. Split slave_configure into two functions, one for wide and one for narrow controllers. Remove some unused definitions, duplicate definitions, unnecessary declarations, and scsireqq, cap_info and inquiry from struct asc_board. Signed-off-by:
-
Matthew Wilcox authored
According to the AdvanSys driver, this device has a problem with tagged queueing. Signed-off-by:
-
Matthew Wilcox authored
AscCompareString() is just another name for strncmp Signed-off-by:
-
Matthew Wilcox authored
- Remove wrappers around the PCI configuration space accessors - Call pci_set_master() instead of poking at config space directly - Move the latency setting into one function called for both narrow and wide boards. - Tidy up AdvInitGetConfig() a little. - Delete a few unused prototypes and definitions. Signed-off-by:
-
Matthew Wilcox authored
Make sure the resources are reserved and released by all the callers of advansys_board_found(). This eliminates the check_region-style race. It also allows us to use the pci_request_regions() API. Signed-off-by:
-
Matthew Wilcox authored
Register two isa_drivers, one for ISA and one for VLB, in order to preserve detection order. When deleting advansys_detect, we lose the last vestiges of the code that limited IO port scanning. This code has been effectively disabled for many years anyway; I'll restore it in a module_param later. We also lose the code that placed all ISA PnP cards into WaitForKey state -- drivers shouldn't be doing this anyway. The asc_host array goes away too. Also remove some IOADR and other definitions, such as ASC_NUM_BOARD_SUPPORTED. Signed-off-by:
-
Matthew Wilcox authored
- Switch EISA probing to the driver model - Remove some now-unused macros and functions - Update the FIXME now that we use the correct driver model probing API Signed-off-by:
-
Matthew Wilcox authored
- Add a pci_driver interface for the PCI advansys devices (for ISA/EISA/VLB devices, we still call advansys_detect). - Many functions are converted from __init to __devinit to allow hotplug PCI to work. - Only keep devices found by advansys_detect in the asc_host list. - Rename asc_board_count to asc_legacy_count. New asc_board_count is only used to generate a unique name for each device. - Remove some now-unused macros and struct definitions Signed-off-by:
-
Matthew Wilcox authored
- Switch from scsi_register/scsi_unregister to scsi_host_alloc, scsi_add_host, scsi_scan_host and scsi_host_put. - Rename the scsi_host_template to advansys_template - Use module_init and module_exit instead of scsi_module.c - Remove protection against advansys_detect being called twice Signed-off-by:
-
Matthew Wilcox authored
- Put all the error cleanup at the end of the function and goto the appropriate label - Split advansys_wide_init_chip out of advansys_board_found - Split advansys_wide_free_mem out of advansys_board_found. Use it from advansys_release - Use GFP_KERNEL, not GFP_ATOMIC, when allocating memory during initialisation - Eliminate lots of PROC_FS ifdefs by removing the ifdefs around the prtbuf struct member Signed-off-by:
-
Matthew Wilcox authored
The interrupt routines used to walk the list of Scsi_Hosts belonging to this driver to make sure that the scsi_cmnd belonged to one of them. This is a waste of time and gets in the way of later cleanups, so delete it. Signed-off-by:
-
