- 27 May, 2008 10 commits
-
-
Kailang Yang authored
Added the support of ALC663 codec, including specific models for ASUS M51VA, ASUS G71V, ASUS H13 and ASUS G50V. Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Kailang Yang authored
Added the missing PCI ID for ICH9 controller (8086:2911) Signed-off-by:
-
Kailang Yang authored
Add the new PCI ID 0x6549 0x1200 Teradici controller. Signed-off-by:
-
Mike Rapoport authored
This patch adds ASoC support for EM-X270 machine. Signed-off-by:
Mike Rapoport <mike@compulab.co.il> Signed-off-by:
-
Takashi Iwai authored
Replace CONFIG_SND_DEBUG_DETECT with CONFIG_SND_DEBUG_VERBOSE to represent its meaning more better. This config isn't provided only for the detection but for more verbose debug prints in general. Signed-off-by: -
Takashi Iwai authored
The kconfig items related with AC97-powersave must be outside the CONFIG_SND_PCI range. And it'd be better together with CONFIG_SND_AC97. Signed-off-by: -
Takashi Iwai authored
Convert menu in sound Kconfig files to menuconfig and if. Signed-off-by: -
Adrian Bunk authored
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Adrian Bunk authored
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by:
-
Chris Mennie authored
Added entry into usbquirks.h to recognize Roland SonicCell sound module by mostly duplicating the entry for the Roland SH-201. USB MIDI works just fine, though the USB audio is a little unreliable (but still works well enough). Signed-off-by:
Chris Mennie <camennie@alumni.uwaterloo.ca> Signed-off-by:
-
- 20 May, 2008 1 commit
-
-
Clemens Ladisch authored
The VT1724 MIDI port is not MPU-401 compatible; remove the hacks that try to make the MPU-401 library work with it, and just use some simple device-specific code. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Tested-by:
Pavel Hofman <pavel.hofman@insite.cz>
-
- 19 May, 2008 29 commits
-
-
Werner Almesberger authored
When timer ticks are disabled when calling sound/soc/s3c24xx/s3c24xx-i2s.c:s3c24xx_snd_lrsync and the LR signal never happens, we loop forever. This has been observed in the following call chain: snd_pcm_common_ioctl1 -> snd_pcm_action_lock_irq -> snd_pcm_action_single -> snd_pcm_do_resume -> soc_pcm_trigger -> s3c24xx_i2s_trigger The patch below changes the timeout mechanism to use udelay, which doesn't need timer ticks. Signed-off-by:
Werner Almesberger <werner@openmoko.org> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
Jaroslav Kysela <perex@perex.cz>
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Currently the ASoC core configures the bias levels in the system using a callback on codecs and machines called 'dapm_event', passing it PCI style power levels as SNDRV_CTL_POWER_ constants. This is more obscure than it needs to be and has caused confusion to driver authors, especially given that DAPM is also performing power management. Address this by renaming the callback function to 'set_bias_level' and using constants explicitly representing the off, standby, pre-on and on states which DAPM transitions through. Also unexport the API for setting bias level: there are currently no in-tree users of this API other than the core itself and it is likely that the core would need to be extended to cater for any users. Signed-off-by:
-
Mark Brown authored
The CPU and codec DAI operations differ only in the presence of the digital mute operation for the codec so they may as well be the same type. Signed-off-by:
-
Mark Brown authored
The overwhelming majority just say 'initial version' anyway. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Takashi Iwai authored
Many HD-audio controllers seem inaccurate about the IRQ timing of PCM period updates. This has caused problems on audio quality; e.g. JACK doesn't work with two periods. This patch fixes the problem by checking the current DMA position at IRQ handler and delays the period-update via a workq if it's inaccurate. Signed-off-by:
-
Andreas Mohr authored
- figured out 'Digital(ly) Enhanced Game Port' functionality, implemented support for it (eliminating gameport polling overhead) - removed optional joystick activation, gameport now enabled unconditionally, since we now support it via the PCI I/O space, not via conflict-prone legacy I/O (which I was thus able to DISABLE now)! - fix playback bug (a muted wave output would get unmuted upon start of playback, of course this is not what we want, thus remember mute state) - implement partial power management: when idle, lower clock rate and disable codec (reduced noise!), and disable gameport circuit when unused - instantiate OPL3 timer, too - much better implementation of snd_azf3328_mixer_write_volume_gradually() - slightly optimized interrupt handling - lots of cleanup This time, I also found a way to verify proper OPL3 operation via MIDI file playback (emulation via synth hardware). Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Jarkko Nikula authored
Use gpiolib since it is now available for OMAPs. Change also references to HW version RX44 to product name N810. Signed-off-by:
Jarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
Signed-off-by:
-
Mark Brown authored
ASoC codecs and machine drivers that use DAPM routes all cut'n'paste a loop iterating over a null terminated array of routes. Factor out this into a bulk registration function, improving the error reporting for most users, and deprecate the old API to help out of tree users pick up the changes. Signed-off-by:
-
Mark Brown authored
Most SoC drivers cut'n'paste a loop iterating over an array to register their DAPM controls. Provide a function they can call instead. Signed-off-by:
-
Clemens Ladisch authored
Add a constraint for the period time so that there are less than ten seconds between interrupts so that ALSA does not assume that the device is dead. Signed-off-by:
-
Clemens Ladisch authored
Introduce symbols for the buffer/period size constraints so that their limits and relationships become clearer. Signed-off-by:
-
Clemens Ladisch authored
Add suspend/resume support. Signed-off-by:
-
Clemens Ladisch authored
Move the setting of the output enable GPIO bit to a separate function. Signed-off-by:
-
Clemens Ladisch authored
Create separate functions for the code that initializes the hardware, as opposed to initializing internal driver state, so that they can be reused for resume support. Signed-off-by:
-
Clemens Ladisch authored
When initializing the DAC volume registers, we can just use the generic volume update functions instead of setting the registers manually. Signed-off-by:
-
Clemens Ladisch authored
Save the written values of all CMI8788 and AC97 registers and of some of the DAC/ADC registers so that it is possible to restore the register state later. Signed-off-by:
-
Clemens Ladisch authored
Remove another magic number - add a symbol for the size of the PCI I/O range. Signed-off-by:
-
Clemens Ladisch authored
Adjust the MODULE_LICENSE strings to properly reflect the actual license. Signed-off-by:
-
Takashi Iwai authored
The hack for dma_alloc_coherent() is no longer needed on 2.6.26 since the base code was improved. Signed-off-by:
-
Daniel Mack authored
This patch adds suport for Native Instruments new 'Guitar Rig Session I/O' audio hardware. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
