- 29 Apr, 2008 40 commits
-
-
Matt Mackall authored
The urandom output pool (ie the fast path) fits in one cacheline, so this is pretty unnecessary. Further, the output path has already fetched the entire pool to hash it before calling in here. (This was the only user of prefetch_range in the kernel, and it passed in words rather than bytes!) Signed-off-by:
Matt Mackall <mpm@selenic.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Mackall authored
- eliminate new_rotate - move input_rotate masking - simplify input_rotate update - move input_rotate update to end of inner loop for readability Signed-off-by:
-
Matt Mackall authored
Earlier changes greatly reduce the number of times we grab the lock per output byte, so we shouldn't need this particular hack any more. Signed-off-by:
-
Matt Mackall authored
At each extraction, we change (poolbits / 16) + 32 bits in the pool, or 96 bits in the case of the secondary pools. Thus, a brute-force backtracking attack on the pool state is less difficult than breaking the hash. In certain cases, this difficulty may be is reduced to 2^64 iterations. Instead, hash the entire pool in one go, then feedback the whole hash (160 bits) in one go. This will make backtracking at least as hard as inverting the hash. Signed-off-by:
-
Matt Mackall authored
- split the SHA variables apart into hash and workspace - rename data to extract - wipe extract and workspace after hashing Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
No locking actually needed. Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Matt Mackall authored
Signed-off-by:
-
Adrian Bunk authored
Remove the no longer used aoedev_isbusy(). Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by:
-
Robert P. J. Day authored
In the spirit of a number of other asm-generic header files, generalize asm-generic/ioctl.h to allow arch-specific ioctl.h headers to simply override _IOC_SIZEBITS and/or _IOC_DIRBITS before including this header file, allowing a number of ioctl.h header files to be shortened considerably. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Robert P. J. Day authored
Since <linux/compiler.h> already tests for __GNUC__, there's no point in nbd.h repeating that test. Signed-off-by:
-
Laurent Vivier authored
Permit the use of partitions with network block devices (NBD). A new parameter is introduced to define how many partition we want to be able to manage per network block device. This parameter is "max_part". For instance, to manage 63 partitions / loop device, we will do: [on the server side] # nbd-server 1234 /dev/sdb [on the client side] # modprobe nbd max_part=63 # ls -l /dev/nbd* brw-rw---- 1 root disk 43, 0 2008-03-25 11:14 /dev/nbd0 brw-rw---- 1 root disk 43, 64 2008-03-25 11:11 /dev/nbd1 brw-rw---- 1 root disk 43, 640 2008-03-25 11:11 /dev/nbd10 brw-rw---- 1 root disk 43, 704 2008-03-25 11:11 /dev/nbd11 brw-rw---- 1 root disk 43, 768 2008-03-25 11:11 /dev/nbd12 brw-rw---- 1 root disk 43, 832 2008-03-25 11:11 /dev/nbd13 brw-rw---- 1 root disk 43, 896 2008-03-25 11:11 /dev/nbd14 brw-rw---- 1 root disk 43, 960 2008-03-25 11:11 /dev/nbd15 brw-rw---- 1 root disk 43, 128 2008-03-25 11:11 /dev/nbd2 brw-rw---- 1 root disk 43, 192 2008-03-25 11:11 /dev/nbd3 brw-rw---- 1 root disk 43, 256 2008-03-25 11:11 /dev/nbd4 brw-rw---- 1 root disk 43, 320 2008-03-25 11:11 /dev/nbd5 brw-rw---- 1 root disk 43, 384 2008-03-25 11:11 /dev/nbd6 brw-rw---- 1 root disk 43, 448 2008-03-25 11:11 /dev/nbd7 brw-rw---- 1 root disk 43, 512 2008-03-25 11:11 /dev/nbd8 brw-rw---- 1 root disk 43, 576 2008-03-25 11:11 /dev/nbd9 # nbd-client localhost 1234 /dev/nbd0 Negotiation: ..size = 80418240KB bs=1024, sz=80418240 -------NOTE, RFC: partition table is not automatically read. The driver sets bdev->bd_invalidated to 1 to force the read of the partition table of the device, but this is done only on an open of the device. So we have to do a "touch /dev/nbdX" or something like that. It can't be done from the nbd-client or nbd driver because at this level we can't ask to read the partition table and to serve the request at the same time (-> deadlock) If someone has a better idea, I'm open to any suggestion. -------NOTE, RFC # fdisk -l /dev/nbd0 Disk /dev/nbd0: 82.3 GB, 82348277760 bytes 255 heads, 63 sectors/track, 10011 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/nbd0p1 * 1 9965 80043831 83 Linux /dev/nbd0p2 9966 10011 369495 5 Extended /dev/nbd0p5 9966 10011 369463+ 82 Linux swap / Solaris # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 brw-rw---- 1 root disk 43, 1 2008-03-25 11:16 /dev/nbd0p1 brw-rw---- 1 root disk 43, 2 2008-03-25 11:16 /dev/nbd0p2 brw-rw---- 1 root disk 43, 5 2008-03-25 11:16 /dev/nbd0p5 # mount /dev/nbd0p1 /mnt # ls /mnt bin dev initrd lost+found opt sbin sys var boot etc initrd.img media proc selinux tmp vmlinuz cdrom home lib mnt root srv usr # umount /mnt # nbd-client -d /dev/nbd0 # ls -l /dev/nbd0* brw-rw---- 1 root disk 43, 0 2008-03-25 11:16 /dev/nbd0 -------NOTE On "nbd-client -d", we can do an iocl(BLKRRPART) to update partition table: as the size of the device is 0, we don't have to serve the partition manager request (-> no deadlock). -------NOTE Signed-off-by:Paul Clements <paul.clements@steeleye.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Laurent Vivier authored
This patch allows Network Block Device to be mounted locally (nbd-client to nbd-server over 127.0.0.1). It creates a kthread to avoid the deadlock described in NBD tools documentation. So, if nbd-client hangs waiting for pages, the kblockd thread can continue its work and free pages. I have tested the patch to verify that it avoids the hang that always occurs when writing to a localhost nbd connection. I have also tested to verify that no performance degradation results from the additional thread and queue. Patch originally from Laurent Vivier. Signed-off-by:
Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by:
-
Tim Gardner authored
Add a kernel parameter option to 'edd' to enable/disable BIOS Enhanced Disk Drive Services. CONFIG_EDD_OFF disables EDD while still compiling EDD into the kernel. Default behavior can be forced using 'edd=on' or 'edd=off' as a kernel parameter. [akpm@linux-foundation.org: fix kernel-parameters.txt] Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Matt Domsch <Matt_Domsch@dell.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Pavel Emelyanov authored
When reading from/writing to some table, a root, which this table came from, may affect this table's permissions, depending on who is working with the table. The core hunk is at the bottom of this patch. All the rest is just pushing the ctl_table_root argument up to the sysctl_perm() function. This will be mostly (only?) used in the net sysctls. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Acked-by:
David S. Miller <davem@davemloft.net> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Denis V. Lunev <den@openvz.org> Signed-off-by:
-
Pavel Emelyanov authored
The do_sysctl_strategy isn't used outside kernel/sysctl.c, so this can be static and without a prototype in header. Besides, move this one and parse_table() above their callers and drop the forward declarations of the latter call. One more "besides" - fix two checkpatch warnings: space before a ( and an extra space at the end of a line. Signed-off-by:
-
Pavel Emelyanov authored
Many (most of) sysctls do not have a per-container sense. E.g. kernel.print_fatal_signals, vm.panic_on_oom, net.core.netdev_budget and so on and so forth. Besides, tuning then from inside a container is not even secure. On the other hand, hiding them completely from the container's tasks sometimes causes user-space to stop working. When developing net sysctl, the common practice was to duplicate a table and drop the write bits in table->mode, but this approach was not very elegant, lead to excessive memory consumption and was not suitable in general. Here's the alternative solution. To facilitate the per-container sysctls ctl_table_root-s were introduced. Each root contains a list of ctl_table_header-s that are visible to different namespaces. The idea of this set is to add the permissions() callback on the ctl_table_root to allow ctl root limit permissions to the same ctl_table-s. The main user of this functionality is the net-namespaces code, but later this will (should) be used by more and more namespaces, containers and control groups. Actually, this idea's core is in a single hunk in the third patch. First two patches are cleanups for sysctl code, while the third one mostly extends the arguments set of some sysctl functions. This patch: These ->read and ->write callbacks act in a very similar way, so merge these paths to reduce the number of places to patch later and shrink the .text size (a bit). Signed-off-by:
-
Adrian Bunk authored
Remove an empty #else. Signed-off-by:
-
Holger Schurig authored
Disable sysctl_check.c for embedded targets. This saves about about 11 kB in .text and another 11 kB in .data on a PXA255 embedded platform. Signed-off-by:
Holger Schurig <hs4233@mail.mn-solutions.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by:
Denis V. Lunev <den@openvz.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Neil Brown <neilb@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by:
Karsten Keil <kkeil@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Add correct ->owner to proc_fops to fix reading/module unloading race. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
Denis V. Lunev authored
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by:
-
