- 01 May, 2005 40 commits
-
-
Al Viro authored
comp_short_keys() massaged into sane form, which kills the last place where pointer to in_core_key (or any object containing such) would be cast to or from something else. At that point we are free to change layout of in_core_key - nothing depends on it anymore. So we drop the mess with union in there and simply use (unconditional) __u64 k_offset and __u8 k_type instead; places using in_core_key switched to those. That gives _far_ better code than current mess - on all platforms. Signed-off-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Cc: <reiserfs-dev@namesys.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Al Viro authored
fixes for a couple of bugs exposed by the above: le32_to_cpu() used on 16bit value and missing conversion in comparison of host- and little-endian values. Signed-off-by:
-
Al Viro authored
little-endian objects annotated as such; again, obviously no changes of resulting code, we only replace __u16 with __le16, etc. in relevant places. Signed-off-by:
-
Al Viro authored
struct reiserfs_key cloned; (currently) identical struct in_core_key added. Places that expect host-endian data in reiserfs_key switched to in_core_key. Basically, we get annotation of reiserfs_key users and keep the resulting tree obviously equivalent to original. Signed-off-by:
-
Ian Kent authored
Bump autofs4 version so we know what's going on. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Ian Kent authored
For tree mount maps, a call to chdir or chroot, to a directory above the moint point directories at a certain time during the expire results in the expire incorrectly thinking the tree is not busy. This patch adds a check to see if the filesystem above the tree mount points is busy and also locks the filesystem during the tree mount expire to prevent the race. Signed-off-by:
-
Ian Kent authored
It's possible for an event wait request to arive before the event requestor. If this happens the daemon never gets notified and autofs hangs. Signed-off-by:
-
Colin Leroy authored
This patch fixes the leak of sb->s_fs_info in both the HFS and HFS+ modules. In addition to this, it fixes an oops happening when trying to mount a non-hfsplus filesystem using hfsplus. This patch is from Roman Zippel, based off patches sent by myself. Signed-off-by:
Colin Leroy <colin@colino.net> Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Ken Chen authored
This patch optimizes io_submit_one to call aio_run_iocb() directly if ctx->run_list is empty. When the list is empty, the operation of adding to the list, then call to __aio_run_iocbs() is unnecessary because these operations are done in one atomic step. ctx->run_list always has only one element in this case. This optimization speeds up industry standard db transaction processing benchmark by 0.2%. Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Suparna Bhattacharya <suparna@in.ibm.com> Signed-off-by:
-
Ken Chen authored
Clean up code that was previously used for debug purpose. Remove aio_run, aio_wakeups, iocb->ki_queued and iocb->ki_kicked. Also clean up unused variable count in __aio_run_iocbs() and debug code in read_events(). Signed-off-by:
-
Ken Chen authored
Since the tail pointer in aio_ring structure never wrap ring size more than once, so a simple compare is sufficient to wrap the index around. This avoid a more expensive mod operation. Signed-off-by:
-
Ken Chen authored
This patch removes superfluous kiocb member initialization in the AIO allocation and deallocation path. For example, in really_put_req(), right before kiocb is returned to slab, 5 variables are reset to NULL. The same variables will be initialized at the kiocb allocation time, so why bother reset them knowing that they will be set to valid data at alloc time? Another example: ki_retry is initialized in __aio_get_req, but is initialized again in io_submit_one. Signed-off-by:
-
Emanuele Giaquinta authored
I've noticed that, starting from linux-2.6.12-rc1, in the top Makefile the "cmd_tags" variable has been changed in a way incompatible with *emacs ctags. Since the "--extra" option exists only in "exuberant ctags", it should be included in the CTAGSF shell variable. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Yum Rayan authored
This patch reduces the stack usage of the function serial_event() in serial_cs from 2212 to 228. I used a patched version of gcc 3.4.3 on i386 with -fno-unit-at-a-time disabled. This patch is only compile tested. Acked-by:
Randy Dunlap <rddunlap@osdl.org> Signed-off-by:
Yum Rayan <yum.rayan@gmail.com> Signed-off-by:
-
Roland Dreier authored
Fix order of #include lines in mthca_memfree.c Signed-off-by:
Roland Dreier <roland@topspin.com> Signed-off-by:
-
Jesper Juhl authored
Convert most of the current code that uses _NSIG directly to instead use valid_signal(). This avoids gcc -W warnings and off-by-one errors. Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Jesper Juhl authored
This patch adds a new function valid_signal() that tests if its argument is a valid signal number. The reasons for adding this new function are: - some code currently testing _NSIG directly has off-by-one errors. Using this function instead avoids such errors. - some code currently tests unsigned signal numbers for <0 which is pointless and generates warnings when building with gcc -W. Using this function instead avoids such warnings. I considered various places to add this function but eventually settled on include/linux/signal.h as the most logical place for it. If there's some reason this is a bad choice then please let me know (hints as to a better location are then welcome of course). Signed-off-by:
-
Kylene Hall authored
This patch adds the maintainers entry. Signed-off-by:
Kylene Hall <kjhall@us.ibm.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Andreas Schwab authored
Signed-off-by:
Andreas Schwab <schwab@suse.de> Signed-off-by:
-
Corey Minyard authored
Correct an issue with the IPMI message layer taking a lock and calling lower layer driver. If an error occrues at the lower layer the lock can be taken again causing a deadlock. The lock is released before calling the lower layer. Signed-off-by:
David Griego <dgriego@mvista.com> Signed-off-by:
Corey Minyard <minyard@acm.org> Signed-off-by:
-
Corey Minyard authored
Enable interrupts for a BT interface. There is a specific register that needs to be set up to enable interrupts that also must be modified to clear the irq. Also, don't reset the BMC on a BT interface. That's probably not a good idea as the BMC may be performing other important functions and a reset should only be a last resort. Also, that register is also used to enable/disable interrupts to the BT; modifying it may screw up the interrupts. Signed-off-by:
-
Corey Minyard authored
If there is an unexpected close, still allow the watchdog interface to be re-opened on the IPMI watchdog. Signed-off-by:
-
Corey Minyard authored
If the ACPI register bit width is zero (an invalid value) assume it is the default spacing. This avoids some coredumps on invalid data and makes some systems work that have broken ACPI data. Signed-off-by:
-
Corey Minyard authored
Ignore the bottom bit of the base address from the DMI data. It is supposed to be set to 1 if it is I/O space. Few systems do this, but this enables the ones that do set it to work properly. Signed-off-by:
-
aquynh@gmail.com authored
Documentation/dontdiff is a little messy. Here is a patch to sort the content of that file in alphabetical Signed-off-by:
Nguyen Anh Quynh <aquynh@gmail.com> Signed-off-by:
-
Edward Shishkin authored
This fixes segmentation fault when specifying bad journal device via a mount option. Don't pass a zero pointer to bdevname() if filp_open() returns error. Signed-off-by:
-
Nicolas Boichat authored
Add missing button codes for the Leadtek Winfast remote controls. Signed-off-by:
Nicolas Boichat <nicolas@boichat.ch> Signed-off-by:
-
Vinay K Nallamothu authored
The variable attributes "packed" and "align" when used with struct, should have the following order: struct ... {...} __attribute__((packed)) var; This patch fixes few instances where the variable and attributes are placed the other way around and had no effect. Signed-off-by: -
Jesper Juhl authored
There were still a few comments left refering to verify_area, and two functions, verify_area_skas & verify_area_tt that just wrap corresponding access_ok_skas & access_ok_tt functions, just like verify_area does for access_ok - deprecate those. There was also a few places that still used verify_area in commented-out code, fix those up to use access_ok. After applying this one there should not be anything left but finally removing verify_area completely, which will happen after a kernel release or two. Signed-off-by:
-
Stephen Rothwell authored
Discussing with Matthew Wilcox some of his outstanding patches lead me to this patch (among others). The preamble in struct sigevent can be expressed independently of the architecture. Also use __ARCH_SI_PREAMBLE_SIZE on ia64. Signed-off-by:
-
Joel Becker authored
I recently realized that the in-kernel copy of hangcheck-timer was quite stale. Here's the latest. It adds support for s390, ppc64, and ia64 too. Signed-off-by:
Joel Becker <joel.becker@oracle.com> Signed-off-by:
-
Bill Nottingham authored
When allocating a new VC with vgacon_init(), the font is shared across all the VGA consoles. However, the font mask was always set to the default value of zero in visual_init(), even if we were using 512 character fonts at the time. Moreover, code in vgacon.c:vga_do_font_op() didn't reset the mask if the console driver thinks it's already in 512 character mode. This means that to *fix* it, you'd actually have to take the console out of 512 character mode and then set it back. The attached sets vc_hi_font_mask in vgacon_init() for any new consoles opened if the vgacon driver is already in 512 character mode, solving this. This bug goes back to 2.4.18 at least, probably earlier. Signed-off-by:
-
Jan Kara authored
Allow rewriting of a file and extending a file upto the end of the allocated block on a full filesystem. From: Chris Mason <mason@suse.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Lars Marowsky-Bree authored
This patches adds the "nbds_max" parameter to the nbd kernel module, which limits the number of nbds allocated. Previously, always all 128 entries were allocated unconditionally, which used to waste resources and needlessly flood the hotplug system with events. (Defaults to 16 now.) Signed-off-by:
Lars Marowsky-Bree <lmb@suse.de> Signed-off-by:
-
Joe Korty authored
Add EOWNERDEAD and ENOTRECOVERABLE to all architectures. This is to support the upcoming patches for robust mutexes. We normally don't reserve parts of the name/number space for external patches, but robust mutexes are sufficiently popular and important to justify it in this case. Signed-off-by:
Joe Korty <joe.korty@ccur.com> Signed-off-by:
-
Jens Axboe authored
Profiling hit rates on merging shows that the last merge hint works extremely well for most work loads. So lets kill the linear merge scan in noop-iosched, so it provides O(1) run time for any operation. Testing credits go to Ken Chen from Intel. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Yoshinori Sato authored
kallsyms does not consider SYMBOL_PREFIX of C. Consequently it does not work on architectures using that prefix character (h8300, v850). Signed-off-by:
-
Peter Missel authored
This is take two of a patch that should have appeared two days ago, before yesterday's "remote control" patch for the same card. This patch sets unconnected GPIO to Output to keep them from floating (just good driver writing practice, being nice to the chip), and uses GPIO16 to switch TV vs. FM - this pin switches inputs onto the tuner, as well as the audio output from the tuner into the 7135 SIF input. Consequently, FM radio support is being un-commented because it's now working (sort of, see below). These two patches get the card almost fully operational; there appears to be a bug in tda8290.c remaining that puts an offset onto the tuned frequency in FM radio mode. We're investigating. Signed-off-by:
-
Peter Missel authored
Subject says it ... this card's IR microcontroller design and attachment are compatible to the company's previous designs, so the patch was as simple as it gets. DESC LifeView FlyTV Platinum FM: GPIO usage EDESC From: Peter Missel <peter.missel@onlinehome.de> This is take two of a patch that should have appeared two days ago, before yesterday's "remote control" patch for the same card. This patch sets unconnected GPIO to Output to keep them from floating (just good driver writing practice, being nice to the chip), and uses GPIO16 to switch TV vs. FM - this pin switches inputs onto the tuner, as well as the audio output from the tuner into the 7135 SIF input. Consequently, FM radio support is being un-commented because it's now working (sort of, see below). These two patches get the card almost fully operational; there appears to be a bug in tda8290.c remaining that puts an offset onto the tuned frequency in FM radio mode. We're investigating. Signed-off-by:
-
