- 16 Oct, 2007 40 commits
-
-
Ilya Yanok authored
Changed things: 1. vmalloc()/vfree() replaced with rvmalloc()/rvfree() (taken from drivers/media/video/se401.c) 2. mmap method implemented (mostly taken from drivers/media/video/se401.c) 3. smem_start and smem_len fields of struct fb_fix_screeninfo initialized. (smem_start initialized with virtual address, don't know if it is really bad...) [adaplas: sparse warning fix] Signed-off-by:Antonino Daplas <adaplas@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Helt authored
This patch: - disallows setting of virtual height above 2048 as it does not work for accelerated copyarea and imageblit - fixes blinking of pm2v cursor by pushing cursor outside the display (x=2047) - fixes hardware cursor position on Permedia 2 chips with panning enabled - enables hardware cursor by default Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support for the Permedia 2 chip. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes white spaces, redudant definitions and formating in the pm3fb header file. Signed-off-by:
-
Krzysztof Helt authored
This patch removes: - redundant fields from the cirrusfb_regs structure - one redundant header - fixes two includes ("" to <>) Signed-off-by: -
Krzysztof Helt authored
This patch does some "short-range" code improvements like merging identical switch clauses, replacing conditional branches with calculation of values, merging only once-used functions into place they are called from. Signed-off-by:
-
Krzysztof Helt authored
This patch removes unused or redundant fields from cirrusfb_info structure. Signed-off-by:
-
Krzysztof Helt authored
This patch replaces "typedef enum" with "enum type" constructs. Using the typedef is error for the checkpatch.pl script. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes over 850 errors and warnings pointed out by the checkpatch.pl script. Signed-off-by:
-
Krzysztof Helt authored
This patch changes mode selection to always prefer default mode if possible and always honor type of display set by default mode settings. This patch is required in case the same display modes were defined for different panels (e.g. STN and TFT). Signed-off-by:
-
Krzysztof Helt authored
This patch removes lcdcon1 register field from the s3c2410fb_display as all bits are calculated from other fields. Signed-off-by:
-
Krzysztof Helt authored
This patch adds pixelclock field to the s3c2410fb_display structure and make use of it in the driver. The Bast machine defined 9 modes but pixclock and margin values are defined only for the 640x480 modes so I removed other modes. This patch also fixes wrong display type constant for the SMDK2440 board. Signed-off-by:
-
Krzysztof Helt authored
This patch: - moves more display mode preparations to s3c2410fb_check_var() - reduces number of fields in s3c2410fb_info - removes redundant values setting in s3c2410fb_probe() - removes static mach_info pointer - releases fb_info structure in s3c2410fb_remove() - changes s3c2410fb_init to __init from __devinit - fixes few typos in comments and removes unused includes Signed-off-by:
-
Krzysztof Helt authored
This patch replaces <asm/uaccess.h> with <linux/uaccess.h> after the checkpatch.pl hint. The include of <asm/uaccess.h> is removed if the driver does not use it. Signed-off-by:
-
Ralf Baechle authored
<linux/selection.h> assumes that struct tty_struct has previously been included. If not, this pile of warnings will result: CC [M] drivers/video/console/newport_con.o In file included from drivers/video/console/newport_con.c:18: include/linux/selection.h:16: warning: 'struct tty_struct' declared inside param eter list include/linux/selection.h:16: warning: its scope is only this definition or decl aration, which is probably not what you want include/linux/selection.h:17: warning: 'struct tty_struct' declared inside param eter list include/linux/selection.h:20: warning: 'struct tty_struct' declared inside param eter list Fixed by adding a forward declaration of struct tty_struct. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
Akpm's patch "newport_con warning fix" got me to look at the console drivers again and one thing that I noticed was that none of the fonts was using ISO initializers for it's fonts. Signed-off-by:
-
Geert Uytterhoeven authored
atyfb: Move the pseudo palette into the card-specific atyfb_par, so it's no longer shared among multiple cards Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Krzysztof Helt authored
This patch sets correct bits related to the byte ordering of the framebuffer. This was tested on little endian kernel only. The big endian kernel may require different settings. The patch also adds 32 bpp mode which is called 24 bpp by Samsung. One pixel takes 32 bits but only 24 bits are used in this mode. Signed-off-by:
-
Krzysztof Helt authored
This patch adds missing virtual register offsets where appropriate. This fixes crashes in the driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl Signed-off-by:
-
Krzysztof Helt authored
This patch removes unused lcdcon2 and lcdcon3 register value from the s3c2410fb_display structure. Signed-off-by:
-
Krzysztof Helt authored
This patch adds synchronization pulse lenght fields to the s3c2410fb_display structure and makes use of them in the driver. Signed-off-by:
-
Krzysztof Helt authored
This patch makes use of vertical margins fields in the s3c2410fb_display structure. Signed-off-by:
-
Krzysztof Helt authored
This patch adds vertical margins values to all s3c24xx platform. Signed-off-by:
-
Krzysztof Helt authored
This patch removes unused lcdcon3 register from the s3c2410fb_display structure. Signed-off-by:
-
Krzysztof Helt authored
This patch makes use of margins fields in the s3c2410fb_display structure. Signed-off-by:
-
Krzysztof Helt authored
This patch adds margins fields to the s3c2410fb_display structure. It also sets display type and horizontal margins in all platform files that use the s3c2410fb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch adds a new structure to describe and handle more than one panel (display mode) for the s3c2410 framebuffer. This structure is added after the pxafb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch removes redundant fb field from the s3c2410fb_info structure. This breaks circular reference fb_info -> s3c2410fb_info -> fb_info again. Signed-off-by:
-
Krzysztof Helt authored
This patch cleans up the driver a bit. It contains coding style fixes (pointed by Lindent and checkpatch), white space clean ups and few minor code improvements. Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support to the pm3fb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support for Permedia 2V chips. The hardware cursor is disabled by default. It does not blink - the same issue is mentioned in the x11 driver. Signed-off-by:
-
Geert Uytterhoeven authored
Looking at the code flow, `int first' in fb_create_modedb() should be static. [adaplas] Better for 'int first' to be moved outside the loop. [akpm@linux-foundation.org: kill stray semicolon] Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Eugene Teo authored
drivers/video/geode/lxfb_core.c: In function 'lxfb_setup': drivers/video/geode/lxfb_core.c:564: warning: unused variable 'opt' Signed-off-by:
Eugene Teo <eugeneteo@kernel.sg> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Krzysztof Helt authored
This patch fixes all errors detected by checkpatch.pl script in the pm3fb.c file. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes all errors detected by checkpatch.pl script in the pm2fb.c file. Signed-off-by:
-
Krzysztof Helt authored
This patch adds mtrr support to the tdfxfb driver. It also kills one redundant include and initialization value. [akpm@linux-foundation.org: cleanups] Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support to the tdfxfb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch improves source code mainly by killing redundant variable loads, reducing number of variables, simplifying conditional branches, etc. Signed-off-by:
-
Antonino A. Daplas authored
Reported by: John Lumby <johnlumby@hotmail.com> Some of the entries in the mode database does not match the comments and/or the refresh field. Adjust the timings so they match with both the comments and the refresh rate. Signed-off-by:
-
Adrian Bunk authored
The logo code is not and should not be used by modules. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
