- 06 Feb, 2009 1 commit
-
-
David S. Miller authored
Just like PKTINFO, limit the options area to 64K. Based upon report by Eric Sesterhenn and analysis by Roland Dreier. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Feb, 2009 7 commits
-
-
David S. Miller authored
This reverts commit 64ff3b93. Jeff Chua reports that it breaks rlogin for him. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
As the options passed to ip6_append_data may be ephemeral, we need to duplicate it for corking. This patch applies the simplest fix which is to memdup all the relevant bits. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesper Dangaard Brouer authored
The UDP header pointer assignment must happen after calling pskb_may_pull(). As pskb_may_pull() can potentially alter the SKB buffer. This was exposted by running multicast traffic through the NIU driver, as it won't prepull the protocol headers into the linear area on receive. Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Fleming authored
SOFT_RESET must be asserted for at least 3 TX clocks in order for it to work properly. The syncs in the gfar_write() commands have been hiding this, but we need to guarantee it. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy Fleming authored
BD_LENGTH_MASK is supposed to catch the low 16-bits of the status field, not the low byte. The old way, we would never be able to clean up tx packets with sizes divisible by 256. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Divy Le Ray authored
The LRO switch is always set to 1 in the rx processing loop. It breaks the accelerated iSCSI receive traffic. Fix its computation. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Feb, 2009 2 commits
-
-
Reinette Chatre authored
This is the right thing to do and fixes the following warning: [ 115.012278] ------------[ cut here ]------------ [ 115.012281] WARNING: at drivers/pci/pci-driver.c:370 pci_legacy_suspend+0x85/0xc2() [ 115.012285] Hardware name: Latitude D630 [ 115.012301] PCI PM: Device state not saved by iwl3945_pci_suspend+0x0/0x4c [iwl3945] [ 115.012304] Modules linked in: fuse nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc ipv6 acpi_cpufreq kvm_intel kvm snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_hwdep arc4 snd_seq_device snd_pcm_oss snd_mixer_oss ecb snd_pcm cryptomgr aead snd_timer crypto_blkcipher snd snd_page_alloc ohci1394 crypto_hash crypto_algapi ch341 ieee1394 usbserial thermal iwl3945 mac80211 led_class lib80211 tg3 processor i2c_i801 i2c_core sg cfg80211 libphy usbhid battery ac button sr_mod cdrom evdev dcdbas ata_generic ata_piix libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: microcode] [ 115.012374] Pid: 4163, comm: pm-suspend Not tainted 2.6.29-rc3-00227-gf1dd849-dirty #67 [ 115.012377] Call Trace: [ 115.012382] [<ffffffff8023d04d>] warn_slowpath+0xb1/0xed [ 115.012387] [<ffffffff80450b5e>] ? _spin_unlock_irqrestore+0x5c/0x78 [ 115.012390] [<ffffffff80254f08>] ? up+0x34/0x39 [ 115.012394] [<ffffffff80362319>] ? acpi_ut_release_mutex+0x5d/0x61 [ 115.012397] [<ffffffff803584b2>] ? acpi_get_data+0x5e/0x70 [ 115.012400] [<ffffffff80363dd9>] ? acpi_bus_get_device+0x25/0x39 [ 115.012403] [<ffffffff80363e98>] ? acpi_bus_power_manageable+0x11/0x29 [ 115.012406] [<ffffffff803462f7>] ? acpi_pci_power_manageable+0x17/0x19 [ 115.012410] [<ffffffff8033ddfd>] ? pci_set_power_state+0xcc/0x101 [ 115.012418] [<ffffffffa01f28e9>] ? iwl3945_pci_suspend+0x0/0x4c [iwl3945] [ 115.012422] [<ffffffff803401e6>] pci_legacy_suspend+0x85/0xc2 [ 115.012425] [<ffffffff80340316>] pci_pm_suspend+0x34/0x86 [ 115.012429] [<ffffffff8039d7ce>] pm_op+0x52/0xe5 [ 115.012432] [<ffffffff8039dd78>] device_suspend+0x32a/0x451 [ 115.012436] [<ffffffff80269ec2>] suspend_devices_and_enter+0x3e/0x13a [ 115.012439] [<ffffffff8026a128>] enter_state+0x110/0x164 [ 115.012442] [<ffffffff8026a233>] state_store+0xb7/0xd7 [ 115.012446] [<ffffffff8032f95f>] kobj_attr_store+0x17/0x19 [ 115.012449] [<ffffffff80307d64>] sysfs_write_file+0xe4/0x119 [ 115.012453] [<ffffffff802baa7a>] vfs_write+0xae/0x137 [ 115.012456] [<ffffffff802babc7>] sys_write+0x47/0x70 [ 115.012459] [<ffffffff8020b73a>] system_call_fastpath+0x16/0x1b [ 115.012467] ---[ end trace 829828966f6f24dc ]--- Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Ming Lei <tom.leiming@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Reinette Chatre authored
Cleans uCode key table bit map iwl_clear_stations_table since all stations are cleared also the key table must be. Since the keys are not removed properly on suspend by mac80211 this may result in exhausting key table on resume leading to memory corruption during removal Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 03 Feb, 2009 20 commits
-
-
Randy Dunlap authored
Fix sunrpc/rdma build dependencies. Survives 12 build combinations of INET, IPV6, SUNRPC, INFINIBAND, and INFINIBAND_ADDR_TRANS. ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_connect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_destroy_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_resolve_route" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_accept" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_listen" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_bind_addr" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Karsten Keil authored
On machine were no IO ports are assigned the call to pci_enable_device() will fail, even if need_ioport is false, we need to use pci_enable_device_mem() here. Signed-off-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dean Nelson authored
A recent patch by Stephen Hemminger to convert XPNET to use net_device_ops and internal net_device_stats failed to link the net_device_ops structure to the net_device structure. See commit e8ac9c55 ("xpnet: convert devices to new API"). Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cord Walter authored
Signed-off-by: Cord Walter <qord@cwalter.net> Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Filip Aben authored
This patch adds a few device ID's. It also removes an ID that was used in an internal engineering version of a device and will never see commercial light. Even if this ID will be 'recycled' in the future, which is very unlikely, we don't know what kind of device will be behind it. Therefore it's safer to remove it. Signed-off-by: Filip Aben <f.aben@option.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Maciej Sosnowski authored
Change spin_locks to irqsave to prevent dead-locks. Protect adding and deleting to/from dca_providers list. Drop the lock during dca_sysfs_add_req() and dca_sysfs_remove_req() calls as they might sleep (use GFP_KERNEL allocation). Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roel Kluin authored
while (limit--) if (test()) break; if (limit <= 0) goto test_failed; In the last iteration, limit is decremented after the test to 0. If just thereafter test() succeeds and a break occurs, the goto still occurs because limit is 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roel Kluin authored
while (timeout--) { ... } timeout becomes -1 if the loop isn't ended otherwise, not 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: Change link order of pciehp & acpiphp PCI hotplug: fakephp: Allocate PCI resources before adding the device PCI MSI: Fix undefined shift by 32 PCI PM: Do not wait for buses in B2 or B3 during resume PCI PM: Power up devices before restoring their state PCI PM: Fix hibernation breakage on EeePC 701 PCI: irq and pci_ids patch for Intel Tigerpoint DeviceIDs PCI PM: Fix suspend error paths and testing facility breakage
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: fix per cpu kmem_cache_cpu array memory leak kmalloc: return NULL instead of link failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: fbdev/atyfb: Fix DSP config on some PowerMacs & PowerBooks powerpc: Fix oops on some machines due to incorrect pr_debug() powerpc/ps3: Printing fixups for l64 to ll64 convserion drivers/net powerpc/5200: update device tree binding documentation powerpc/5200: Bugfix for PCI mapping of memory and IMMR powerpc/5200: update defconfigs
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched_rt: don't use first_cpu on cpumask created with cpumask_and sched: fix buddie group latency sched: clear buddies more aggressively sched: symmetric sync vs avg_overlap sched: fix sync wakeups cpuset: fix possible deadlock in async_rebuild_sched_domains
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (45 commits) V4L/DVB (10411): s5h1409: Perform s5h1409 soft reset after tuning V4L/DVB (10403): saa7134-alsa: saa7130 doesn't support digital audio V4L/DVB (10229): ivtv: fix memory leak V4L/DVB (10385): gspca - main: Fix memory leak when USB disconnection while streaming. V4L/DVB (10325): em28xx: Fix for fail to submit URB with IRQs and Pre-emption Disabled V4L/DVB (10317): radio-mr800: fix radio->muted and radio->stereo V4L/DVB (10314): cx25840: ignore TUNER_SET_CONFIG in the command callback. V4L/DVB (10288): af9015: bug fix: stick does not work always when plugged V4L/DVB (10287): af9015: fix second FE V4L/DVB (10270): saa7146: fix unbalanced mutex_lock/unlock V4L/DVB (10265): budget.c driver: Kernel oops: "BUG: unable to handle kernel paging request at ffffffff V4L/DVB (10261): em28xx: fix kernel panic on audio shutdown V4L/DVB (10257): em28xx: Fix for KWorld 330U Board V4L/DVB (10256): em28xx: Fix for KWorld 330U AC97 V4L/DVB (10254): em28xx: Fix audio URB transfer buffer race condition V4L/DVB (10250): cx25840: fix regression: fw not loaded on first use V4L/DVB (10248): v4l-dvb: fix a bunch of compile warnings. V4L/DVB (10243): em28xx: fix compile warning V4L/DVB (10240): Fix obvious swapped names in v4l2_subdev logic V4L/DVB (10233): [PATCH] Terratec Cinergy DT XS Diversity new USB ID (0ccd:0081) ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: pxamci: enable DMA for write ops after CMD/RESP pxamci: replace #ifdef CONFIG_PXA27x with if (cpu_is_pxa27x()) ricoh_mmc: Use suspend_late/resume_early mmci: Add support for ST Micro derivate mmc: Add a MX2/MX3 specific SDHC driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: icside: fix PCB version 6 support (v2) tx4939ide: typo fix and minor cleanup ide: add CS5536 host driver (v3) ide: Force VIA IDE legacy interrupts for AmigaOne boards IDE: Unregister and disable devices if initialization fails. ide: fix ide_register_port() failure handling ide: struct device - replace bus_id with dev_name(), dev_set_name() ide-cd: fix DMA for non bio-backed requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwbLinus Torvalds authored
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: lock rc->rsvs_lock with spin_lock_bh() wusb: timeout when waiting for ASL/PZL updates in whci-hcd uwb: remove unused #include <version.h>'s wusb: return -ENOTCONN when resetting a port with no connected device uwb: safely remove all reservations
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: add text file detailing queue/ sysfs files bio.h: If they MUST be inlined, then use __always_inline Fix misleading comment in bio.h block: fix inconsistent parenthesisation of QUEUE_FLAG_DEFAULT block: fix oops in blk_queue_io_stat()
-
Mark McLoughlin authored
The host really shouldn't be notifying us of config changes before the device status is VIRTIO_CONFIG_S_DRIVER or VIRTIO_CONFIG_S_DRIVER_OK. However, if we do happen to be interrupted while we're not attached to a driver, we really shouldn't oops. Prevent this simply by checking that device->driver is non-NULL before trying to notify the driver of config changes. Problem observed by doing a "set_link virtio.0 down" with QEMU before the net driver had been loaded. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Dumazet authored
Current refcounting for modules (done if CONFIG_MODULE_UNLOAD=y) is using a lot of memory. Each 'struct module' contains an [NR_CPUS] array of full cache lines. This patch uses existing infrastructure (percpu_modalloc() & percpu_modfree()) to allocate percpu space for the refcount storage. Instead of wasting NR_CPUS*128 bytes (on i386), we now use nr_cpu_ids*sizeof(local_t) bytes. On a typical distro, where NR_CPUS=8, shiping 2000 modules, we reduce size of module files by about 2 Mbytes. (1Kb per module) Instead of having all refcounters in the same memory node - with TLB misses because of vmalloc() - this new implementation permits to have better NUMA properties, since each CPU will use storage on its preferred node, thanks to percpu storage. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 02 Feb, 2009 10 commits
-
-
Ron Mercer authored
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ron Mercer authored
Without this the 2nd port gets first ports MAC addr. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ron Mercer authored
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Commit 93821778 (udp: Fix rcv socket locking) accidentally removed sk_drops increments for UDP IPV4 sockets. This field can be used to detect incorrect sizing of socket receive buffers. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Reported by Andrew Walrond <andrew@walrond.org> Changeset c19e654d ("gre: Add netlink interface") added an include of linux/ip.h to linux/if_tunnel.h We can't really let that get exposed to userspace because this conflicts with types defined in netinet/ip.h which userland is almost certainly going to have included either explicitly or implicitly. So guard this include with a __KERNEL__ ifdef. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cliff Brake authored
With the PXA270 MMC hardware, there seems to be an issue of data corruption on writes where a 4KB data block is offset by one byte. If we delay enabling the DMA for writes until after the CMD/RESP has finished, the problem seems to be fixed. related to PXA270 Erratum #91 Tested-by: Vernon Sauder <VernonInHand@gmail.com> Signed-off-by: Cliff Brake <cbrake@bec-systems.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
Cliff Brake authored
Signed-off-by: Cliff Brake <cbrake@bec-systems.com> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
philipl@overt.org authored
If ricoh_mmc suspends before sdhci_pci, it will pull the card out from under the controller, which could leave the system in a very confused state. Using suspend_late/resume_early ensures that sdhci_pci suspends first and resumes second. Signed-off-by: Philip Langdale <philipl@overt.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
Linus Walleij authored
This patch adds support for the ST Microelectronics version of the PL180 PrimeCell. They use designer ID 0x80 and have a few alterations/bugfixes related to open drain and HW flow control. They also add some SDIO registers, I am unsure if these are in ST HW only or if this is things also added in later ARM revisions, but they are included in the mmci.h file for completeness. Signed-off-by: Linus Walleij <linus.walleij@ericsson.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-
Sascha Hauer authored
This patch adds a MX2/MX3 specific SDHC driver. The hardware is basically the same as in the MX1, but unlike the MX1 controller the MX2 controller just works as expected. Since the MX1 driver has more workarounds for bugs than anything else I had no success with supporting MX1 and MX2 in a sane way in one driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
-