- 07 Jan, 2009 40 commits
-
-
Philipp Zabel authored
As Russell King points out, calling put_device(otg_transceiver->dev) directly in driver cleanup paths makes assumptions about otg_transceiver internals. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Philipp Zabel authored
gpio_vbus provides simple GPIO VBUS sensing for peripheral controllers with an internal transceiver. Optionally, a second GPIO can be used to control D+ pullup. It also interfaces with the regulator framework to limit charging currents when powered via USB. gpio_vbus requests the regulator supplying "vbus_draw" and can enable/disable it or limit its current depending on USB state. [dbrownell@users.sourceforge.net: use drivers/otg, cleanups ] Signed-off-by:
-
David Brownell authored
This moves the isp1301-omap driver from the drivers/i2c/chips directory (which will be shrinking) into a new drivers/usb/otg directory (which will grow, with more drivers and utilities). Note that OTG infrastructure needs to be initialized before either host or peripheral side USB support, and may be needed before for pure host or pure peripheral configurations. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Ben Dooks authored
Change the gpio code in the s3c2410_udc to use the generic gpio calls instead of the s3c24xx specific gpio functions. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
David Brownell authored
Some code in the pxa25x_udc driver wrongly expects the value of is_vbus_present() to be 0/1, not zero/nonzero ... cope. Issue noted by Jaya Kumar <jayakumar.lkml@gmail.com> This bug has been around since July 2007, and has a simple workaround: unplug the Linux gadget, then re-plug it. Signed-off-by:
-
Felipe Balbi authored
Without it, in platforms that don't provide irq_chip.set_wake(), like omap, musb will WARN() on driver removal. Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
-
Felipe Balbi authored
Trivial patch adding musb's git tree to MAINTAINERS file. Signed-off-by:
-
David Brownell authored
Random host-side MUSB updates, mostly relating to better diagnostics: + Improve diagnostics on host side: - tx flush fifo: * Avoid hundreds of duplicate TX FIFONOTEMPTY messages * make "Can't flush TX fifo" a warning, and say which endpoint - giveback: * use correct status code * show completion function name not just URB pointer - Fix annoying "1 bytes" (should be "1 byte") + Be more consistent about failing init of unusable fifo_mode It's not clear why that "can't flush TX fifo" message appears, though it might relate to disconnection; I see it not infrequently Signed-off-by: -
David Brownell authored
Minor locking fix for musb_hdrc on OMAP3 and OMAP2430: don't read DEVCTL without holding the spinlock, since an IRQ could come in and corrupt things. Signed-off-by:
-
Kevin Hilman authored
- update includes after asm/arch --> mach headers move - adds musb_platform_set_mode() stub Signed-off-by:
Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by:
-
David Brownell authored
Fix three omissions in the "mode" sysfs attribute support: (a) inability to report errors; (b) no DaVinci support ... just report an error; (c) for omap2430, accepting unsupportable values The 2430 stuff is still odd.... Signed-off-by:
-
David Lopo authored
MIPS USB IP core family device controller Currently it only supports IP part number CI13412. [dbrownell@users.sourceforge.net: minor comment tweaks] Signed-off-by:
David Lopo <dlopo@chipidea.mips.com> Signed-off-by:
-
Julia Lawall authored
Since num is unsigned, it would seem better to use simple_strtoul that simple_strtol. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r2@ long e; position p; @@ e = simple_strtol@p(...) @@ position p != r2.p; type T; T e; @@ e = - simple_strtol@p + simple_strtoul (...) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Acked-by:
-
Rusty Russell authored
Impact: cleanup Found this when I changed args to __module_param_call. We now have core_param for exactly this, but Greg assures me "nousb" is used as a module parameter, so we need the #ifdef MODULE. Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Alan Stern authored
This patch (as1175) makes usb-storage set a SCSI device's request-queue bounce limit such that all buffers will be located in addressable memory (i.e., not in high memory) if the host controller's dma_mask is NULL. This is necessary when the host controller doesn't support DMA: If a buffer is in high memory then the both the virtual and DMA addresses produced by the scatter-gather library will be NULL, preventing the HCD from accessing the buffer's data. In particular, the isp1760 driver needs this when used on a system with more than 1 GB of memory. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Acked-by:
Jens Axboe <jens.axboe@oracle.com> Tested-by:
Thomas Hommel <Thomas.Hommel@gefanuc.com> Signed-off-by:
-
Alan Stern authored
This patch (as1174) merges usb-storage's QIC-157 and ATAPI protocol routines. Since the two functions are identical, there's no reason to keep them separate. Signed-off-by:
-
Alan Stern authored
This patch (as1173) merges usb-storage's CB and CBI transports into a single routine. So much of their code is common, it's silly to keep them separate. Signed-off-by:
-
Alan Stern authored
This patch (as1172) adds the ability to emulate a CD-ROM drive to g_file_storage. The emulation is limited, since it presents as a disc containing a single data track and no audio tracks. Still, it may come in useful on occasion. Signed-off-by:
-
Ben Efros authored
Add a few devices known to have support for larger sense buffers. Supporting SANE_SENSE does not necessarily mean SAT-1 or SAT-2 is fully supported. Depends on SANE_SENSE patch [1]. Incorporates the Maxtor and Western Digital devices originally submitted by Matthieu CASTET [2]. [1] https://lists.one-eyed-alien.net/pipermail/usb-storage/2008-November/004181.html [2] http://marc.info/?l=linux-usb&m=121762869915609&w=2Signed-off-by:
Ben Efros <ben@pc-doctor.com> Signed-off-by:
Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Ben Efros authored
Add the SANE SENSE flag to indicate that a device is capable of handling more than 18-bytes of sense data. This functionality is required for USB-ATA bridges implementing SAT. A future patch will actually enable this function for several devices. The logic behind this is that we can detect support for SANE_SENSE in a few ways: 1) ATA PASS THROUGH (12) or (16) execute successfully 2) SPC-3 or higher is in use 3) A previous CHECK CONDITION occurred with sense format 70-73 and had a length greater than 18-bytes total Signed-off-by:
-
Alan Stern authored
This patch (as1171) removes us->sensebuf, since it isn't used anywhere. Signed-off-by:
-
Alan Stern authored
This patch (as1170) removes some duplicate entries in unusual_devs.h and rearranges a few others to put the list in proper numerical order. Signed-off-by:
-
Alan Stern authored
This patch (as1166) changes usb_new_device(). Now new devices will be announced in the log _prior_ to being registered; this way the "new device" lines will appear before all the output from driver probing, which seems much more logical. Also, the patch adds a call to usb_stop_pm() to the failure pathway, so that the parent's count of unsuspended children will remain correct if registration fails. In order for this to work properly, the code to increment that count has to be moved forward, before the first point where a failure can occur. Signed-off-by:
-
Pete Zaitcev authored
usbmon can only be built as a module if usbcore is a module too. Trivial changes to the relevant Kconfig and Makefile (and a few trivial changes elsewhere) allow usbmon to be built as a module even if usbcore is builtin. This is verified to work in all 9 permutations (3 correctly prohibited by Kconfig, 6 build a suitable result). Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Qinghuang Feng authored
mark {__init|__exit} for usb_ipw_{init|exit} () Signed-off-by:Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by:
-
Qinghuang Feng authored
no argument named @index in pio_irq_disable, and no argument named @req in inc_ep_stats_bytes, remove them. Signed-off-by:
-
Magnus Damm authored
Use the more common platform_get_resource() together with index instead of depending on the resource name and platform_get_resource_by_name(). Replace the resource_len() implementation with resource_size(). Signed-off-by:
Magnus Damm <damm@igel.co.jp> Acked-by:
Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by:
-
Jean Delvare authored
The legacy i2c binding model will go away soon, convert ohci-pnx4008 to use the new binding model instead. Signed-off-by:
-
Inaky Perez-Gonzalez authored
This patch introduces a new call to be able to do a USB reset from an atomic contect. This is quite helpful in USB callbacks to handle errors (when the only thing that can be done is to do a device reset). It is done queuing a work struct that will do the actual reset. The struct is "attached" to an interface so pending requests from an interface are removed when said interface is unbound from the driver. The call flow then becomes: usb_queue_reset_device() __usb_queue_reset_device() [workqueue] usb_reset_device() usb_probe_interface() usb_cancel_queue_reset() [error path] usb_unbind_interface() usb_cancel_queue_reset() usb_driver_release_interface() usb_cancel_queue_reset() Note usb_cancel_queue_reset() needs smarts to try not to unqueue when it is actually being executed. This happens when we run the reset from the workqueue: usb_reset_device() is called and on interface unbind time, usb_cancel_queue_reset() would be called. That would deadlock on cancel_work_sync(). To avoid that, we set (before running usb_reset_device()) usb_intf->reset_running and clear it inmediately after returning. Patch is against 2.6.28-rc2 and depends on http://marc.info/?l=linux-usb&m=122581634925308&w=2 (as submitted by Alan Stern). Signed-off-by:Inaky Perez-Gonzalez <inaky@linux.intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Alan Stern authored
This patch (as1160b) adds support routines for asynchronous autosuspend and autoresume, with accompanying documentation updates. There already are several potential users of this interface, and others are likely to arise as autosuspend support becomes more widespread. Signed-off-by:
-
Alan Stern authored
This patch (as1163b) adds a "quirks=" module parameter to usb-storage. This will allow people to make short-term changes to their unusual_devs list without rebuilding the entire driver. Testing will become much easier, and less-sophisticated users will be able to access their buggy devices after a simple config-file change instead of having to wait for a new kernel release. The patch also adds a documentation entry for usb-storage's "delay_use" parameter, which has been around for years but but was never listed among the kernel parameters. Signed-off-by:
-
Kay Sievers authored
Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Kay Sievers authored
Signed-off-by:
-
Vitaly Bordug authored
A published errata for ppc440epx states, that when running Linux with both EHCI and OHCI modules loaded, the EHCI module experiences a fatal error when a high-speed device is connected to the USB2.0, and functions normally if OHCI module is not loaded. There used to be recommendation to use only hi-speed or full-speed devices with specific conditions, when respective module was unloaded. Later, it was observed that ohci suspend is enough to keep things going, and it was turned into workaround, as explained below. Quote from original descriprion: The 440EPx USB 2.0 Host controller is an EHCI compliant controller. In USB 2.0 Host controllers, each EHCI controller has one or more companion controllers, which may be OHCI or UHCI. An USB 2.0 Host controller will contain one or more ports. For each port, only one of the controllers is connected at any one time. In the 440EPx, there is only one OHCI companion controller, and only one USB 2.0 Host port. All ports on an USB 2.0 controller default to the companion controller. If you load only an ohci driver, it will have control of the ports and any deviceplugged in will operate, although high speed devices will be forced to operate at full speed. When an ehci driver is loaded, it explicitly takes control of the ports. If there is a device connected, and / or every time there is a new device connected, the ehci driver determines if the device is high speed or not. If it is high speed, the driver retains control of the port. If it is not, the driver explicitly gives the companion controller control of the port. The is a software workaround that uses Initial version of the software workaround was posted to linux-usb-devel: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54019.html and later available from amcc.com: http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=15&ins=2 The patch below is generally based on the latter, but reworked to powerpc/of_device USB drivers, and uses a few devicetree inquiries to get rid of (some) hardcoded defines. Signed-off-by:
Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by:
Stefan Roese <sr@denx.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Anton Vorontsov authored
The QE UDC doesn't check for cpm_muram_alloc() return values, this might cause all sorts of misbehaviour when cpm_muram_alloc() failed to allocate the muram memory. While at at, change few dev_dbg() calls to dev_err(), so that the driver would not die silently. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Signed-off-by:
-
Alan Stern authored
This patch (as1161) changes the interface to usb_lock_device_for_reset(). The existing interface is apparently not very clear, judging from the fact that several of its callers don't use it correctly. The new interface always returns 0 for success and it always requires the caller to unlock the device afterward. The new routine will not return immediately if it is called while the driver's probe method is running. Instead it will wait until the probe is over and the device has been unlocked. This shouldn't cause any problems; I don't know of any cases where drivers call usb_lock_device_for_reset() during probe. Signed-off-by:
-
Ilpo Järvinen authored
It seems that there's rather involved way to say something which is commonly written in a plain simple form. Some type changes would probably be necessary to get gcc to do bitops instead of divide but it's no worse after my change than before I think. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Oliver Neukum authored
this introduces a sanity check into berry_charge to give up before damage is done if we lack juice. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Phil Endecott authored
Just over a year ago (!) I had this brief exchange with Alan Stern: >> It seems that the signal that can be used with USBDEVFS_DISCSIGNAL and >> in usbdevfs_urb.signr is limited to the real-time signals SIGRTMIN to >> SIGRTMAX. What's the rationale for this restriction? I believe that a >> process can kill() itself with any signal number, can't it? I was >> planning to use SIGIO for usbdevfs_urb.signr and SIGTERM (uncaught) for >> USBDEVFS_DISCSIGNAL. I don't think I'll have a problem with using >> SIGRTMIN+n instead, but I'm curious to know if there's some subtle >> problem with the non-real-time signals that I should be aware of. > > I don't know of any reason for this restriction. Since no-one else could think of a reason either, I offer the following patch which allows any signal to be used with USBDEVFS_DISCSIGNAL and usbdevfs_urb.signr. Signed-off-by:
Phil Endecott <usbpatch@chezphil.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Harvey Harrison authored
Also a trivial annotation in rh.c for: drivers/usb/wusbcore/rh.c:366:9: warning: incorrect type in assignment (different base types) drivers/usb/wusbcore/rh.c:366:9: expected unsigned short [unsigned] [short] [usertype] <noident> drivers/usb/wusbcore/rh.c:366:9: got restricted __le16 [usertype] <noident> drivers/usb/wusbcore/rh.c:367:9: warning: incorrect type in assignment (different base types) drivers/usb/wusbcore/rh.c:367:9: expected unsigned short [unsigned] [short] [usertype] <noident> drivers/usb/wusbcore/rh.c:367:9: got restricted __le16 [usertype] <noident> Association types annotation fixes piles of warnings similar to: drivers/usb/wusbcore/cbaf.c:238:30: warning: incorrect type in initializer (different base types) drivers/usb/wusbcore/cbaf.c:238:30: expected restricted __le16 [usertype] id drivers/usb/wusbcore/cbaf.c:238:30: got int drivers/usb/wusbcore/cbaf.c:238:30: warning: incorrect type in initializer (different base types) drivers/usb/wusbcore/cbaf.c:238:30: expected restricted __le16 [usertype] len drivers/usb/wusbcore/cbaf.c:238:30: got int Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by:
-
