Switch from formatting messages in probe routine and copying with
kfifo, to using a small circular queue of information and formatting
on read.  This avoids wraparound issues with kfifo, and saves one
copy.

Also make sure to state correct license, rather than copying off some
other driver I started with.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers need to validate the initial addresses in their netlink attribute
validation function or manually reject them if they can't support this.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

All drivers need to unregister their devices in the module unload function.
While doing so they must hold the rtnl and atomically unregister the
rtnl_link ops as well. This makes the rtnl_link_unregister function that
takes the rtnl itself completely useless.

Provide default newlink/dellink functions, make __rtnl_link_unregister and
rtnl_link_unregister unregister all devices with matching rtnl_link_ops and
change the existing users to take advantage of that.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The VLAN MAC address handling is broken in multiple ways. When the address
differs when setting it, the real device is put in promiscous mode twice,
but never taken out again. Additionally it doesn't resync when the real
device's address is changed and needlessly puts it in promiscous mode when
the vlan device is still down.

Fix by moving address handling to vlan_dev_open/vlan_dev_stop and properly
deal with address changes in the device notifier. Also switch to
dev_unicast_add (which needs the exact same handling).

Since the set_mac_address handler is identical to the generic ethernet one
with these changes, kill it and use ether_setup().
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Keep netpoll/poll_napi from messing with the poll_list.
Only net_rx_action is allowed to manipulate the list.
Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Throw out the old mark & sweep garbage collector and put in a
refcounting cycle detecting one.

The old one had a race with recvmsg, that resulted in false positives
and hence data loss.  The old algorithm operated on all unix sockets
in the system, so any additional locking would have meant performance
problems for all users of these.

The new algorithm instead only operates on "in flight" sockets, which
are very rare, and the additional locking for these doesn't negatively
impact the vast majority of users.

In fact it's probable, that there weren't *any* heavy senders of
sockets over sockets, otherwise the above race would have been
discovered long ago.

The patch works OK with the app that exposed the race with the old
code.  The garbage collection has also been verified to work in a few
simple cases.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

When creating a new connection by sending an unknown chunk type, we
don't transition to a valid state, causing a NULL pointer dereference
in sctp_packet when accessing sctp_timeouts[SCTP_CONNTRACK_NONE].

Fix by don't creating new conntrack entry if initial state is invalid.

Noticed by Vilmos Nebehaj <vilmos.nebehaj@ramsys.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make all initialized struct seq_operations in net/ const
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rémi Denis-Courmont wrote:
> Right. By the way, shouldn't "len" rather be signed in there?
> 
> 		unsigned int len;
> 
> 		/* if we're overly short, let UDP handle it */
> 		len = skb->len - sizeof(struct udphdr);
> 		if (len <= 0)
> 			goto udp;

It should, but the < 0 case can't happen since __udp4_lib_rcv
already makes sure that we have at least a complete UDP header.

Anyways, this patch fixes it.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This trivial patch removes the unneeded pointer idev returned from
__in6_dev_get(), which is never used. The check for NULL can be simply
done by if (__in6_dev_get(dev) == NULL).
Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No longer needed.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because reversing RH0 is no longer supported by deprecation
of RH0, let's make IPV6_{RECV,2292}RTHDR boolean options.
Boolean are more appropriate from standard POV.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Based on <draft-ietf-ipv6-deprecate-rh0-00.txt>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The "fix" for emerging security threat was overkill and it broke
basic semantic of IPv6 routing header processing.  We should assume
RT0 (or even RT2, depends on configuration) as "unknown" RH type so
that we
- silently ignore the routing header if segleft == 0
- send ICMPv6 Parameter Problem message back to the sender,
  otherwise.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the HTB scheduler does not correctly account for TSO packets
which causes large inaccuracies in the bandwidth control when using TSO.
This patch allows the HTB scheduler to work with TSO enabled devices.
Signed-off-by: Ranjit Manomohan <ranjitm@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rusty (whose comments we should all study and emulate :) pointed
out that our comments for skb checksums are no longer up-to-date.
So here is a patch to

1) add the case of partial checksums on input;
2) update partial checksum case to mention csum_start/csum_offset;
3) mention the new IPv6 feature bit.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

To better support and handle eSCO links in the future a bunch of
constants needs to be added and some basic routines need to be
updated. This is the initial step.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

As noticed by Jarek Poplawski <jarkao2@o2.pl>, the timer removal in
gen_kill_estimator races with the timer function rearming the timer.

Check whether the timer list is empty before rearming the timer
in the timer function to fix this.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Jarek Poplawski <jarkao2@o2.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

93ec2c72 applied excessive duct tape to
the netpoll beast's netpoll_cleanup(), thus substituting one leak with
another, and opening up a little buglet :-)

net_device->npinfo (netpoll_info) is a shared and refcounted object and
cannot simply be set NULL the first time netpoll_cleanup() is called.
Otherwise, further netpoll_cleanup()'s see np->dev->npinfo == NULL and
become no-ops, thus leaking. And it's a bug too: the first call to
netpoll_cleanup() would thus (annoyingly) "disable" other (still alive)
netpolls too. Maybe nobody noticed this because netconsole (only user
of netpoll) never supported multiple netpoll objects earlier.

This is a trivial and obvious one-line fixlet.
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since there is no Kconfig variable RXRPC anywhere in the tree, and the
variable AF_RXRPC performs exactly the same function, remove the
reference to CONFIG_RXRPC from net/Makefile.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The VLSI 82C147 IrDA controller driver uses a semaphore as mutex.  Use the
mutex API instead of the (binary) semaphore.
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

- save 4 bytes

- it's read-mostly.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vasily Averin <vvs@sw.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

This includes /proc/net/protocols, /proc/net/rxrpc_calls and
/proc/net/rxrpc_connections files.

All three need seq_list_start_head to show some header.
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The .show callback receives the list_head pointer now, not the struct
br2684_dev one.
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Document the expectations about device MTU handling.
The documentation about oversize packet handling is probably too
loose.

IMHO devices should drop oversize packets for robustness,
but many devices allow it now. For example, if you set mtu to 1200
bytes, most ether devices will allow a 1500 byte frame in.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the documentation about locking assumptions.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Got bored to always recompile it for no reason.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add management firmware version for ethtool -i.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In addition to the periodic heartbeat, we're adding a heartbeat
request interrupt when the heartbeat is late.  This is needed during
netpoll where the timer is not available.  -rt kernels will also
benefit since the timer is not as accurate.

[ We discussed this patch last time and we decided that the -rt
  kernel problem alone did not justify this patch.  I think the
  netpoll problem makes this patch necessary. ]
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Spurious interrupts are often encountered especially on systems
using the 8259 PIC mode.  This is because the I/O write to deassert
the interrupt is posted and won't get to the chip immediately.  As
a result, the IRQ may remain asserted after the IRQ handler exits,
causing spurious interrupts.

Add read back to flush the I/O write to deassert the IRQ immediately.
We also store the last_status_idx immediately in the IRQ handler to
help detect whether the interrupt is ours or not when the IRQ is
entered again before ->poll gets called.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify the link up dmesg to report remote copper or Serdes link.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modify the driver's ethtool_ops->get_settings and set_settings
functions to support remote PHY.  Users control the remote copper
PHY settings by specifying link settings for the tp (twisted pair)
port.

The nway_reset function is also modified to support remote PHY.
mii-tool operations are not supported on remote PHY and we will
return -EOPNOTSUPP.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In blade servers, the Serdes PHY in 5708S can control the remote
copper PHY through autonegotiation on the backplane.  This patch adds
the logic to interface with the firmware to control the remote PHY
autonegotiation and to handle remote PHY link events.

When remote PHY is present, the 5708S Serdes device practically
becomes a copper device with full control over the 1000Base-T
link settings.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>