- 28 Jun, 2006 37 commits
-
-
Vladimir V. Saveliev authored
generic_file_buffered_write() prefaults in user pages in order to avoid deadlock on copying from the same page as write goes to. However, it looks like there is a problem when write is vectored: fault_in_pages_readable brings in current segment or its part (maxlen). OTOH, filemap_copy_from_user_iovec is called to copy number of bytes (bytes) which may exceed current segment, so filemap_copy_from_user_iovec switches to the next segment which is not brought in yet. Pagefault is generated. That causes the deadlock if pagefault is for the same page write goes to: page being written is locked and not uptodate, pagefault will deadlock trying to lock locked page. [akpm@osdl.org: somewhat rewritten] Cc: Neil Brown <neilb@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: <stable@kernel.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
David Woodhouse authored
We include config.h on the compiler command line. There's no need for it to be included again. Signed-off-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Ingo Molnar authored
locking init cleanups: - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK() - convert rwlocks in a similar manner this patch was generated automatically. Motivation: - cleanliness - lockdep needs control of lock initialization, which the open-coded variants do not give - it's also useful for -rt and for lock debugging in general Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Adrian Bunk authored
- add a proper prototype for the following global function: - buffer_init() - make the following needlessly global function static: - end_buffer_async_write() Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Randy Dunlap authored
Add more poison values to include/linux/poison.h. It's not clear to me whether some others should be added or not, so I haven't added any of these: ./include/linux/libata.h:#define ATA_TAG_POISON 0xfafbfcfdU ./arch/ppc/8260_io/fcc_enet.c:1918: memset((char *)(&(immap->im_dprambase[(mem_addr+64)])), 0x88, 32); ./drivers/usb/mon/mon_text.c:429: memset(mem, 0xe5, sizeof(struct mon_event_text)); ./drivers/char/ftape/lowlevel/ftape-ctl.c:738: memset(ft_buffer[i]->address, 0xAA, FT_BUFF_SIZE); ./drivers/block/sx8.c:/* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */ Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Randy Dunlap authored
Update two drivers to use poison.h. Signed-off-by:
-
Randy Dunlap authored
Localize poison values into one header file for better documentation and easier/quicker debugging and so that the same values won't be used for multiple purposes. Use these constants in core arch., mm, driver, and fs code. Signed-off-by:
Matt Mackall <mpm@selenic.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Ingo Molnar authored
Move the i386 VDSO down into a vma and thus randomize it. Besides the security implications, this feature also helps debuggers, which can COW a vma-backed VDSO just like a normal DSO and can thus do single-stepping and other debugging features. It's good for hypervisors (Xen, VMWare) too, which typically live in the same high-mapped address space as the VDSO, hence whenever the VDSO is used, they get lots of guest pagefaults and have to fix such guest accesses up - which slows things down instead of speeding things up (the primary purpose of the VDSO). There's a new CONFIG_COMPAT_VDSO (default=y) option, which provides support for older glibcs that still rely on a prelinked high-mapped VDSO. Newer distributions (using glibc 2.3.3 or later) can turn this option off. Turning it off is also recommended for security reasons: attackers cannot use the predictable high-mapped VDSO page as syscall trampoline anymore. There is a new vdso=[0|1] boot option as well, and a runtime /proc/sys/vm/vdso_enabled sysctl switch, that allows the VDSO to be turned on/off. (This version of the VDSO-randomization patch also has working ELF coredumping, the previous patch crashed in the coredumping code.) This code is a combined work of the exec-shield VDSO randomization code and Gerd Hoffmann's hypervisor-centric VDSO patch. Rusty Russell started this patch and i completed it. [akpm@osdl.org: cleanups] [akpm@osdl.org: compile fix] [akpm@osdl.org: compile fix 2] [akpm@osdl.org: compile fix 3] [akpm@osdl.org: revernt MAXMEM change] Signed-off-by:
Arjan van de Ven <arjan@infradead.org> Cc: Gerd Hoffmann <kraxel@suse.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@muc.de> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
James Bottomley authored
The following [PATCH] Clean up and refactor i386 sub-architecture setup Doesn't quite work, since it leaves out an include of asm/io.h, without which the use of inb/outb in the setup file won.t work. This corrects that and also removes a spurious acpi reference that apparently crept in ages ago but should never have been there. Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by:
-
James Bottomley authored
Commit 1e9f28fa ("[PATCH] sched: new sched domain for representing multi-core") incorrectly made SCHED_SMT and some of the structures it uses dependent on SMP. However, this is wrong, the structures are only defined if X86_HT, so SCHED_SMT has to depend on that as well. The patch broke voyager, since it doesn't provide any of the multi-core or hyperthreading structures. Signed-off-by:
-
Aleksey Gorelov authored
Commit c3ff8ec3 ("[PATCH] i386: Don't miss pending signals returning to user mode after signal processing") meant that vm86 interrupt/signal handling got broken for the case when vm86 is called from kernel space. In this scenario, if signal is pending because of vm86 interrupt, do_notify_resume/do_signal exits immediately due to user_mode() check, without processing any signals. Thus, resume_userspace handler is spinning in a tight loop with signal pending and TIF_SIGPENDING is set. Previously everything worked Ok. No in-tree usage of vm86() from kernel space exists, but I've heard about a number of projects out there which use vm86 calls from kernel, one of them being this, for instance: http://dev.gentoo.org/~spock/projects/vesafb-tng/ The following patch fixes the issue. Signed-off-by:
Aleksey Gorelov <aleksey_gorelov@phoenix.com> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
Chuck Ebbert authored
Using C code for current_thread_info() lets the compiler optimize it. With gcc 4.0.2, kernel is smaller: text data bss dec hex filename 3645212 555556 312024 4512792 44dc18 2.6.17-rc6-nb-post/vmlinux 3647276 555556 312024 4514856 44e428 2.6.17-rc6-nb/vmlinux ------- -2064 Signed-off-by:Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by:
-
Rohit Seth authored
Move the phys_core_id and cpu_core_id to cpuinfo_x86 structure. Similar patch for x86_64 is already accepted by Andi earlier this week. [akpm@osdl.org: fix warning] Signed-off-by:
Rohit Seth <rohitseth@google.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Andreas Mohr authored
Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Rusty Russell authored
Remove the limit of 256 interrupt vectors by changing the value stored in orig_{e,r}ax to be the complemented interrupt vector. The orig_{e,r}ax needs to be < 0 to allow the signal code to distinguish between return from interrupt and return from syscall. With this change applied, NR_IRQS can be > 256. Xen extends the IRQ numbering space to include room for dynamically allocated virtual interrupts (in the range 256-511), which requires a more permissive interface to do_IRQ. Signed-off-by:Ian Pratt <ian.pratt@xensource.com> Signed-off-by:
Christian Limpach <Christian.Limpach@cl.cam.ac.uk> Signed-off-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Shaohua Li authored
The patch fixes two issues: 1. cpu_init is called with interrupt disabled. Allocating gdt table there isn't good at runtime. 2. gdt table page cause memory leak in CPU hotplug case. Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by:
-
Michael LeMay authored
Update SELinux to cause the keycreate process attribute held in /proc/self/attr/keycreate to be inherited across a fork and reset upon execve. This is consistent with the handling of the other process attributes provided by SELinux and also makes it simpler to adapt logon programs to properly handle the keycreate attribute. Signed-off-by:
Michael LeMay <mdlemay@epoch.ncsc.mil> Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Acked-by:
James Morris <jmorris@namei.org> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
With Goto-san's patch, we can add new pgdat/node at runtime. I'm now considering node-hot-add with cpu + memory on ACPI. I found acpi container, which describes node, could evaluate cpu before memory. This means cpu-hot-add occurs before memory hot add. In most part, cpu-hot-add doesn't depend on node hot add. But register_cpu(), which creates symbolic link from node to cpu, requires that node should be onlined before register_cpu(). When a node is onlined, its pgdat should be there. This patch-set holds off creating symbolic link from node to cpu until node is onlined. This removes node arguments from register_cpu(). Now, register_cpu() requires 'struct node' as its argument. But the array of struct node is now unified in driver/base/node.c now (By Goto's node hotplug patch). We can get struct node in generic way. So, this argument is not necessary now. This patch also guarantees add cpu under node only when node is onlined. It is necessary for node-hot-add vs. cpu-hot-add patch following this. Moreover, register_cpu calculates cpu->node_id by cpu_to_node() without regard to its 'struct node *root' argument. This patch removes it. Also modify callers of register_cpu()/unregister_cpu, whose args are changed by register-cpu-remove-node-struct patch. [Brice.Goglin@ens-lyon.org: fix it] Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Ashok Raj <ashok.raj@intel.com> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
Brice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by:
-
Yasunori Goto authored
This is a patch to allocate pgdat and per node data area for ia64. The size for them can be calculated by compute_pernodesize(). Signed-off-by:
Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Yasunori Goto authored
This is to refresh node_data[] array for ia64. As I mentioned previous patches, ia64 has copies of information of pgdat address array on each node as per node data. At v2 of node_add, this function used stop_machine_run() to update them. (I wished that they were copied safety as much as possible.) But, in this patch, this arrays are just copied simply, and set node_online_map bit after completion of pgdat initialization. So, kernel must touch NODE_DATA() macro after checking node_online_map(). (Current code has already done it.) This is more simple way for just hot-add..... Note : It will be problem when hot-remove will occur, because, even if online_map bit is set, kernel may touch NODE_DATA() due to race condition. :-( Signed-off-by: -
Yasunori Goto authored
[PATCH] pgdat allocation and update for ia64 of memory hotplug: hold pgdat address at system running This is a preparatory patch to make common code for updating of NODE_DATA() of ia64 between boottime and hotplug. Current code remembers pgdat address in mem_data which is used at just boot time. But its information can be used at hotplug time by moving to global value. The next patch uses this array. Signed-off-by:
-
Yasunori Goto authored
When new node becomes enable by hot-add, new sysfs file must be created for new node. So, if new node is enabled by add_memory(), register_one_node() is called to create it. In addition, I386's arch_register_node() and a part of register_nodes() of powerpc are consolidated to register_one_node() as a generic_code(). This is tested by Tiger4(IPF) with node hot-plug emulation. Signed-off-by:
Keiichiro Tokunaga <tokuanga.keiich@jp.fujitsu.com> Signed-off-by:
-
Yasunori Goto authored
Fix "undefined reference to `arch_add_memory'" on sparc64 allmodconfig. sparc64 doesn't support memory hotplug. But we want it to support sparsemem. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
This patch allows hot-add memory which is not aligned to section. Now, hot-added memory has to be aligned to section size. Considering big section sized archs, this is not useful. When hot-added memory is registerd as iomem resoruce by iomem resource patch, we can make use of that information to detect valid memory range. Note: With this, not-aligned memory can be registerd. To allow hot-add memory with holes, we have to do more work around add_memory(). (It doesn't allows add memory to already existing mem section.) Signed-off-by: -
KAMEZAWA Hiroyuki authored
Register hot-added memory to iomem_resource. With this, /proc/iomem can show hot-added memory. Note: kdump uses /proc/iomem to catch memory range when it is installed. So, kdump should be re-installed after /proc/iomem change. Signed-off-by: -
Yasunori Goto authored
Add node-hot-add support to add_memory(). node hotadd uses this sequence. 1. allocate pgdat. 2. refresh NODE_DATA() 3. call free_area_init_node() to initialize 4. create sysfs entry 5. add memory (old add_memory()) 6. set node online 7. run kswapd for new node. (8). update zonelist after pages are onlined. (This is already merged in -mm due to update phase is difference.) Note: To make common function as much as possible, there is 2 changes from v2. - The old add_memory(), which is defiend by each archs, is renamed to arch_add_memory(). New add_memory becomes caller of arch dependent function as a common code. - This patch changes add_memory()'s interface From: add_memory(start, end) TO : add_memory(nid, start, end). It was cause of similar code that finding node id from physical address is inside of old add_memory() on each arch. In addition, acpi memory hotplug driver can find node id easier. In v2, it must walk DSDT'S _CRS by matching physical address to get the handle of its memory device, then get _PXM and node id. Because input is just physical address. However, in v3, the acpi driver can use handle to get _PXM and node id for the new memory device. It can pass just node id to add_memory(). Fix interface of arch_add_memory() is in next patche. Signed-off-by: -
Yasunori Goto authored
When node is hot-added, kswapd for the node should start. This export kswapd start function as kswapd_run() to use at add_memory(). [akpm@osdl.org: daemonize() isn't needed when using the kthread API] Signed-off-by:
-
Yasunori Goto authored
Refresh NODE_DATA() for generic archs. In this case, NODE_DATA(nid) == node_data[nid]. node_data[] is array of address of pgdat. So, refresh is quite simple. Signed-off-by:
-
Yasunori Goto authored
For node hotplug, basically we have to allocate new pgdat. But, there are several types of implementations of pgdat. 1. Allocate only pgdat. This style allocate only pgdat area. And its address is recorded in node_data[]. It is most popular style. 2. Static array of pgdat In this case, all of pgdats are static array. Some archs use this style. 3. Allocate not only pgdat, but also per node data. To increase performance, each node has copy of some data as a per node data. So, this area must be allocated too. Ia64 is this style. Ia64 has the copies of node_data[] array on each per node data to increase performance. In this series of patches, treat (1) as generic arch. generic archs can use generic function. (2) and (3) should have its own if necessary. This patch defines pgdat allocator. Updating NODE_DATA() macro function is in other patch. Signed-off-by:
-
Yasunori Goto authored
This is to find node id from acpi's handle of memory_device in DSDT. _PXM for the new node can be found by acpi_get_pxm() by using new memory's handle. So, node id can be found by pxm_to_nid_map[]. This patch becomes simpler than v2 of node hot-add patch. Because old add_memory() function doesn't have node id parameter. So, kernel must find its handle by physical address via DSDT again. But, v3 just give node id to add_memory() now. Signed-off-by:
-
Yasunori Goto authored
Change the name of old add_memory() to arch_add_memory. And use node id to get pgdat for the node at NODE_DATA(). Note: Powerpc's old add_memory() is defined as __devinit. However, add_memory() is usually called only after bootup. I suppose it may be redundant. But, I'm not well known about powerpc. So, I keep it. (But, __meminit is better at least.) Signed-off-by: -
Yasunori Goto authored
[PATCH] Catch notification of memory add event of ACPI via container driver. (avoid redundant call add_memory) When acpi_memory_device_init() is called at boottime to register struct memory acpi_memory_device, acpi_bus_add() are called via acpi_driver_attach(). But it also calls ops->start() function. It is called even if the memory blocks are initialized at early boottime. In this case add_memory() return -EEXIST, and the memory blocks becomes INVALID state even if it is normal. This is patch to avoid calling add_memory() for already available memory. [akpm@osdl.org: coding cleanups] Signed-off-by:
-
Yasunori Goto authored
[PATCH] Catch notification of memory add event of ACPI via container driver. (register start func for memory device) This is a patch to call add_memroy() when notify reaches for new node's add event. When new node is added, notify of ACPI reaches container device which means the node. Container device driver calls acpi_bus_scan() to find and add belonging devices (which means cpu, memory and so on). Its function calls add and start function of belonging devices's driver. Howevever, current memory hotplug driver just register add function to create sysfs file for its memory. But, acpi_memory_enable_device() is not called because it is considered just the case that notify reaches memory device directly. So, if notify reaches container device nothing can call add_memory(). This is a patch to create start function which calls add_memory(). add_memory() can be called by this when notify reaches container device. [akpm@osdl.org: coding cleanups] Signed-off-by:
-
KAMEZAWA Hiroyuki authored
Current acpi memory hotplug just looks into the first entry of resources in _CRS. But, _CRS can contain plural resources. So, if _CRS contains plural resoureces, acpi memory hot add cannot add all memory. With this patch, acpi memory hotplug can deal with Memory Device, whose _CRS contains plural resources. Tested on ia64 memory hotplug test envrionment (not emulation, uses alpha version firmware which supports dynamic reconfiguration of NUMA.) Note: Microsoft's Windows Server 2003 requires big (>4G)resoureces to be divided into small (<4G) resources. looks crazy, but not invalid. (See http://www.microsoft.com/whdc/system/pnppwr/hotadd/hotaddmem.mspx) For this reason, a firmware vendor who supports Windows writes plural resources in a _CRS even if they are contiguous. Signed-off-by:Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Andrew Morton authored
CONFIG_PM_TRACES scrogs your RTC. Mark it as experimental, and defaulting to `off'. Also beef up the help message a bit. Signed-off-by:
-
Randy Dunlap authored
Fix function definitions to be ANSI-compliant: lib/zlib_inflate/inffast.c:68:1: warning: non-ANSI definition of function 'inflate_fast' lib/zlib_inflate/inftrees.c:33:1: warning: non-ANSI definition of function 'zlib_inflate_table' Signed-off-by:
-
Randy Dunlap authored
kernel/acct.c:579:19: warning: non-ANSI function declaration of function 'acct_process' Signed-off-by:
-
- 27 Jun, 2006 2 commits
-
-
David Brownell authored
Builds on ARM report link problems with common configurations like statically linked NFS (for nfsroot). The symptom is that __init section code references __exit section code; that won't work since the exit sections are discarded (since they can never be called). The best fix for these particular cases would be an "__init_or_exit" section annotation. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Acked-by:
Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by:
-
Dmitry Torokhov authored
It should be done before calling class_device_unregister() because it will destroy the device and free memory if there are no other references to the device. Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
- 26 Jun, 2006 1 commit
-
-
Linus Torvalds authored
This reverts commit e5c44fd8. Thanks to Daniel Ritz and Michal Piotrowski for noticing the problem. Daniel says: "[The] reason is a recent change that made modules always shows as module.mod. it breaks modprobe and probably many scripts..besides lsmod looking horrible stuff like this in modprobe.conf: install pcmcia_core /sbin/modprobe --ignore-install pcmcia_core; /sbin/modprobe pcmcia makes modprobe fork/exec endlessly calling itself...until oom interrupts it" Signed-off-by:
-
