- 17 Apr, 2008 12 commits
-
-
Jason Wessel authored
Add HW breakpoints into the arch specific portion of x86 kgdb. In the current x86 kernel.org kernels HW breakpoints are changed out in lazy fashion because there is no infrastructure around changing them when changing to a kernel task or entering the kernel mode via a system call. This lazy approach means that if a user process uses HW breakpoints the kgdb will loose out. This is an acceptable trade off because the developer debugging the kernel is assumed to know what is going on system wide and would be aware of this trade off. There is a minor bug fix to the kgdb core so as to correctly call the hw breakpoint functions with a valid value from the enum. There is also a minor change to the x86_64 startup code when using early HW breakpoints. When the debugger is connected, the cpu startup code must not zero out the HW breakpoint registers or you cannot hit the breakpoints you are interested in, in the first place. Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Jason Wessel authored
If kgdb does remove a breakpoint that had a problem on the recursion check, it should also print the address of the breakpoint. Signed-off-by:
-
Jason Wessel authored
In order to not trip the clocksource watchdog, kgdb must touch the clocksource watchdog on the return to normal system run state. Signed-off-by:
-
Jason Wessel authored
This patch fixes the hang regression with kgdb when the NMI interrupt comes in while the master core is returning from an exception. Adjust the NMI logic such that KGDB will not stop NMI exceptions from occurring by in general returning NOTIFY_DONE. It is not possible to distinguish the debug NMI sync vs the normal NMI apic interrupt so kgdb needs to catch the unknown NMI if it the debugger was previously active on one of the cpus. Signed-off-by:
-
Jason Wessel authored
Fix the run time configuration of kgdboc such that it does not default to 9600 baud if you use the "echo" command to configure the sysfs module paramater. Signed-off-by:
-
Jason Wessel authored
document the kgdboc module/boot parameter. Signed-off-by:
Jan Kiszka <jan.kiszka@web.de> Signed-off-by:
-
Ingo Molnar authored
simplified and streamlined kgdb support on x86, both 32-bit and 64-bit, based on patch from: Subject: kgdb: core-lite From: Jason Wessel <jason.wessel@windriver.com> [ and countless other authors - see the patch for details. ] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Jason Wessel authored
polled console handling support, to access a console in an irq-less way while in debug or irq context. absolutely zero impact as long as CONFIG_CONSOLE_POLL is disabled. (which is the default) [ jan.kiszka@siemens.com: lots of cleanups ] [ mingo@elte.hu: redesign, splitups, cleanups. ] Signed-off-by:
-
Jason Wessel authored
kgdb core code. Handles the protocol and the arch details. [ mingo@elte.hu: heavily modified, simplified and cleaned up. ] [ xemul@openvz.org: use find_task_by_pid_ns ] Signed-off-by:
-
Ingo Molnar authored
add probe_kernel_read() and probe_kernel_write(). Uninlined and restricted to kernel range memory only, as suggested by Linus. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: it821x: do not describe noraid parameter with its value Pb1200/DBAu1200: fix bad IDE resource size Au1200: IDE driver build fix Au1200: kill IDE driver function prototypes avr32 mustn't select HAVE_IDE
-
- 16 Apr, 2008 28 commits
-
-
Paul Bolle authored
Describe noraid parameter with its name (and not its value). Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Sergei Shtylyov authored
The header files for the Pb1200/DBAu1200 boards have wrong definition for the IDE interface's decoded range length -- it should be 512 bytes according to what the IDE driver does. In addition, the IDE platform device claims 1 byte too many for its memory resource -- fix the platform code and the IDE driver in accordance. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Sergei Shtylyov authored
The driver fails to compile with CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA enabled: drivers/ide/mips/au1xxx-ide.c: In function `auide_build_dmatable': drivers/ide/mips/au1xxx-ide.c:256: error: implicit declaration of function `sg_virt' drivers/ide/mips/au1xxx-ide.c:275: error: implicit declaration of function `sg_next' drivers/ide/mips/au1xxx-ide.c:275: warning: assignment makes pointer from integer without a cast Fix this by including <linux/scatterlist.h>. While at it, remove the #include's without which the driver happily builds. Signed-off-by:
-
Sergei Shtylyov authored
Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c: include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared `static' but never defined include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared `static' but never defined by wiping out the whole "function prototyping" section from the header file <asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are already dead in the IDE driver; move the only useful prototype into the driver. Signed-off-by:
-
Adrian Bunk authored
There's a libata based PATA driver for avr32, but no support for drivers/ide/ on avr32. This patch fixes the following compile error: <-- snip --> ... CC [M] drivers/ide/ide-cd.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/ide-cd.c:37: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/ide.h:209:21: error: asm/ide.h: No such file or directory make[3]: *** [drivers/ide/ide-cd.o] Error 1 <-- snip --> Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: update git url for blktrace io context: increment task attachment count in ioc_task_link()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: remove broken usb-serial num_endpoints check USB: option: Add new vendor ID and device ID for AMOI HSDPA modem USB: support more Huawei data card product IDs USB: option.c: add more device IDs USB: Obscure Maxon BP3-USB Device Support 16d8:6280 for option driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [TCP]: Add return value indication to tcp_prune_ofo_queue(). PS3: gelic: fix the oops on the broken IE returned from the hypervisor b43legacy: fix DMA mapping leakage mac80211: remove message on receiving unexpected unencrypted frames Update rt2x00 MAINTAINERS entry Add rfkill to MAINTAINERS file rfkill: Fix device type check when toggling states b43legacy: Fix usage of struct device used for DMAing ssb: Fix usage of struct device used for DMAing MAINTAINERS: move to generic repository for iwlwifi b43legacy: fix initvals loading on bcm4303 rtl8187: Add missing priv->vif assignments netconsole: only set CON_PRINTBUFFER if the user specifies a netconsole [CAN]: Update documentation of struct sockaddr_can MAINTAINERS: isdn4linux@listserv.isdn4linux.de is subscribers-only [TCP]: Fix never pruned tcp out-of-order queue. [NET_SCHED] sch_api: fix qdisc_tree_decrease_qlen() loop
-
Paul Bolle authored
Describe debug parameters with their names (and not their values). Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Greg Kroah-Hartman authored
The num_interrupt_in, num_bulk_in, and other checks in the usb-serial code are just wrong, there are too many different devices out there with different numbers of endpoints. We need to just be sticking with the device ids instead of trying to catch this kind of thing. It broke too many different devices. This fixes a large number of usb-serial devices to get them working properly again. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by:Greg Kroah-Hartman <gregkh@suse.de>
-
tang kai authored
This patch add new vendor ID and device ID for AMOI HSDPA modem. From: tang kai <tangk73@hotmail.com> Signed-off-by: -
fangxiaozhi authored
- declare the unusal device for Huawei data card devices in unusual_devs.h - disable the product ID matching for Huawei data card devices in usb_match_device function of driver.c - declare the product IDs in option.c. Signed-off-by:
fangxiaozhi <huananhu@huawei.com> Signed-off-by:
-
Matthias Urlichs authored
Add devices by AMOI and NovatelWireless. Signed-Off-By:
Matthias Urlichs <matthias@urlichs.de> Signed-off-by:
-
James Cameron authored
The modem was detected, the ttyUSB{0,1,2} appeared, a call could be made, and the expected data rate was achieved. Tested for an hour or two, total of 100Mb. I shall do more testing. Signed-off-by:James Cameron <quozl@laptop.org> Signed-off-by:
-
Vitaliy Gusev authored
Returns non-zero if tp->out_of_order_queue was seen non-empty. This allows tcp_try_rmem_schedule() to return early. Signed-off-by:
Vitaliy Gusev <vgusev@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
yakui.zhao@intel.com authored
http://bugzilla.kernel.org/show_bug.cgi?id=10124 this change: commit 08f1c192 Author: Muli Ben-Yehuda <muli@il.ibm.com> Date: Sun Jul 22 00:23:39 2007 +0300 x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata This patch introduces struct pci_sysdata to x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it. This lays the groundwork for having other users of sysdata, such as the PCI domains work. The Calgary bits are tested, the NUMA bits just look ok. replaces pcibios_scan_root by pci_scan_bus_parented... but in pcibios_scan_root we have a check about scanned busses. Cc: <yakui.zhao@intel.com> Cc: Stian Jordet <stian@jordet.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Yinghai Lu" <yhlu.kernel@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Krzysztof Helt authored
The THERMAL_MAX_TRIPS value is set to 10. It is too few for the Compaq AP550 machine which has 12 trip points. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Len Brown <lenb@kernel.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
-
Chuck Ebbert authored
List could have become empty after the unlocked check that was made earlier, so check again inside the lock. Should fix https://bugzilla.redhat.com/show_bug.cgi?id=427765Signed-off-by:
Chuck Ebbert <cebbert@redhat.com> Cc: <stable@kernel.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
-
Ben Dooks authored
The SPI core now expects num_chipselect to be set correctly as due to added checks on the chip being selected before an transfer is allowed. This patch adds a num_cs field to the platform data which needs to be set correctly before adding the SPI platform device. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Ben Dooks authored
Pass the bus number we expect the S3C24XX SPI driver to attach to via the platform data. Signed-off-by:
-
Ben Dooks authored
The s3c24xx_spi_txrx() function should initialise the completion each time before using it, otherwise we end up with the possibility of returning success before the interrupt handler has processed all the data. Signed-off-by:
-
Jan Kara authored
mb_cache_entry_alloc() was allocating cache entries with GFP_KERNEL. But filesystems are calling this function while holding xattr_sem so possible recursion into the fs violates locking ordering of xattr_sem and transaction start / i_mutex for ext2-4. Change mb_cache_entry_alloc() so that filesystems can specify desired gfp mask and use GFP_NOFS from all of them. Signed-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Dave Jones <davej@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by:
-
Nishanth Aravamudan authored
As shown by Gurudas Pai recently, we can put hugepages into the surplus state (by echo 0 > /proc/sys/vm/nr_hugepages), even when /proc/sys/vm/nr_overcommit_hugepages is 0. This is actually correct, to allow the original goal (shrink the static pool to 0) to succeed (we are converting hugepages to surplus because they are in use). However, the documentation does not accurately reflect this case. Update it. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Acked-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
KOSAKI Motohiro authored
In a5d76b54 (memory unplug: page isolation by KAMEZAWA Hiroyuki), "isolate" migratetype added. but unfortunately, it doesn't treat /proc/pagetypeinfo display logic. this patch add "Isolate" to pagetype name field. /proc/pagetype before: ------------------------------------------------------------------------------------------------------------------------ Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone DMA, type Unmovable 1 2 2 2 1 2 2 1 1 0 0 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type Movable 2 3 3 1 3 3 2 0 0 0 0 Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone DMA, type <NULL> 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Unmovable 1 9 7 4 1 1 1 1 0 0 0 Node 0, zone Normal, type Reclaimable 5 2 0 0 1 1 0 0 0 1 0 Node 0, zone Normal, type Movable 0 1 1 0 0 0 1 0 0 1 60 Node 0, zone Normal, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone Normal, type <NULL> 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Unmovable 0 0 1 1 1 0 1 1 2 2 0 Node 0, zone HighMem, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Movable 236 62 6 2 2 1 1 0 1 1 16 Node 0, zone HighMem, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone HighMem, type <NULL> 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Reclaimable Movable Reserve <NULL> Node 0, zone DMA 1 0 2 1 0 Node 0, zone Normal 10 40 169 1 0 Node 0, zone HighMem 2 0 283 1 0 after: ------------------------------------------------------------------------------------------------------------------------ Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone DMA, type Unmovable 1 2 2 2 1 2 2 1 1 0 0 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone DMA, type Movable 2 3 3 1 3 3 2 0 0 0 0 Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Unmovable 0 2 1 1 0 1 0 0 0 0 0 Node 0, zone Normal, type Reclaimable 1 1 1 1 1 0 1 1 1 0 0 Node 0, zone Normal, type Movable 0 1 1 1 0 1 0 1 0 0 196 Node 0, zone Normal, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Unmovable 0 1 0 0 0 1 1 1 2 2 0 Node 0, zone HighMem, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Movable 1 0 1 1 0 0 0 0 1 0 200 Node 0, zone HighMem, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone HighMem, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Reclaimable Movable Reserve Isolate Node 0, zone DMA 1 0 2 1 0 Node 0, zone Normal 8 4 207 1 0 Node 0, zone HighMem 2 0 283 1 0 Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Dmitri Vorobiev authored
A couple of typos crept into the newly added document about the seq_file interface. This patch corrects those typos and simultaneously deletes unnecessary trailing spaces. Signed-off-by:
Dmitri Vorobiev <dmitri.vorobiev@gmail.com> Signed-off-by:
-
WANG Cong authored
This patch fixes this error: In file included from /home/wangcong/projects/linux-2.6/arch/um/kernel/smp.c:9: include2/asm/tlb.h: In function `tlb_remove_page': include2/asm/tlb.h:101: error: implicit declaration of function `page_cache_release' And since including <linux/pagemap.h> in <linux/swap.h> will break sparc, we add this #include in uml's own header. Acked-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
WANG Cong <wangcong@zeuux.org> Signed-off-by:
-
Li Zefan authored
When I used a test program to fork mass processes and immediately move them to a cgroup where the memory limit is low enough to trigger oom kill, I got oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000808 IP: [<ffffffff8045c47f>] _spin_lock_irqsave+0x8/0x18 PGD 4c95f067 PUD 4406c067 PMD 0 Oops: 0002 [1] SMP CPU 2 Modules linked in: Pid: 11973, comm: a.out Not tainted 2.6.25-rc7 #5 RIP: 0010:[<ffffffff8045c47f>] [<ffffffff8045c47f>] _spin_lock_irqsave+0x8/0x18 RSP: 0018:ffff8100448c7c30 EFLAGS: 00010002 RAX: 0000000000000202 RBX: 0000000000000009 RCX: 000000000001c9f3 RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000808 RBP: ffff81007e444080 R08: 0000000000000000 R09: ffff8100448c7900 R10: ffff81000105f480 R11: 00000100ffffffff R12: ffff810067c84140 R13: 0000000000000001 R14: ffff8100441d0018 R15: ffff81007da56200 FS: 00007f70eb1856f0(0000) GS:ffff81007fbad3c0(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000808 CR3: 000000004498a000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process a.out (pid: 11973, threadinfo ffff8100448c6000, task ffff81007da533e0) Stack: ffffffff8023ef5a 00000000000000d0 ffffffff80548dc0 00000000000000d0 ffff810067c84140 ffff81007e444080 ffffffff8026cef9 00000000000000d0 ffff8100441d0000 00000000000000d0 ffff8100441d0000 ffff8100505445c0 Call Trace: [<ffffffff8023ef5a>] ? force_sig_info+0x25/0xb9 [<ffffffff8026cef9>] ? oom_kill_task+0x77/0xe2 [<ffffffff8026d696>] ? mem_cgroup_out_of_memory+0x55/0x67 [<ffffffff802910ad>] ? mem_cgroup_charge_common+0xec/0x202 [<ffffffff8027997b>] ? handle_mm_fault+0x24e/0x77f [<ffffffff8022c4af>] ? default_wake_function+0x0/0xe [<ffffffff8027a17a>] ? get_user_pages+0x2ce/0x3af [<ffffffff80290fee>] ? mem_cgroup_charge_common+0x2d/0x202 [<ffffffff8027a441>] ? make_pages_present+0x8e/0xa4 [<ffffffff8027d1ab>] ? mmap_region+0x373/0x429 [<ffffffff8027d7eb>] ? do_mmap_pgoff+0x2ff/0x364 [<ffffffff80210471>] ? sys_mmap+0xe5/0x111 [<ffffffff8020bfc9>] ? tracesys+0xdc/0xe1 Code: 00 00 01 48 8b 3c 24 e9 46 d4 dd ff f0 ff 07 48 8b 3c 24 e9 3a d4 dd ff fe 07 48 8b 3c 24 e9 2f d4 dd ff 9c 58 fa ba 00 01 00 00 <f0> 66 0f c1 17 38 f2 74 06 f3 90 8a 17 eb f6 c3 fa b8 00 01 00 RIP [<ffffffff8045c47f>] _spin_lock_irqsave+0x8/0x18 RSP <ffff8100448c7c30> CR2: 0000000000000808 ---[ end trace c3702fa668021ea4 ]--- It's reproducable in a x86_64 box, but doesn't happen in x86_32. This is because tsk->sighand is not guarded by RCU, so we have to hold tasklist_lock, just as what out_of_memory() does. Signed-off-by:
Li Zefan <lizf@cn.fujitsu> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Pavel Emelianov <xemul@openvz.org> Cc: Paul Menage <menage@google.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: David Rientjes <rientjes@cs.washington.edu> Signed-off-by:
-
Kay Sievers authored
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable serial platform drivers, to re-enable auto loading. NOTE that Kconfig for some of these drivers doesn't allow modular builds, and thus doesn't match the driver source's unload support. Presumably their unload code is buggy and/or weakly tested... [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
-
