- 27 Jun, 2008 15 commits
-
-
Andi Kleen authored
s2io has IOMMU overflow checking, but unfortunately it is wrong. It didn't use the standard macros, which meant that it only worked on POWER and SPARC because only those define DMA_ERROR_CODE. Convert it to use the standard macros instead. I also commented two more bugs in the IOMMU handling. It assumes that 0 DMA addresses cannot happen, but that's not true in all IOMMU setups. The information if a buffer has been already mapped needs to be stored elsewhere. Didn't fix those because it needs careful checking of the buffer handling by the maintainers. Cc: ram.vepa@neterion.com Cc: santosh.rastapur@neterion.com Cc: sivakumar.subramani@neterion.com Cc: sreenivasa.honnur@neterion.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Andy Gospodarek authored
When enabling TSO via ethool on e1000, it is possible to set NETIF_F_TSO6 on hardware that does not support it. Setting TSO via ethtool now matches the settings used when the hardware is probed. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Kevin Hao authored
The E100 device can't work on current kernel (2.6.26-rc6) and will cause kernel corruption on intel ixdp4xx. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Al Viro authored
PCI_DEVICE_CLASS sets .device and .vendor to PCI_ANY_DEV, which overrides the effect of preceding PCI_DEVICE() and makes all elements of netxen_pci_tbl[] identical. Introduced in the commit dcd56fdb. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Ingo Molnar authored
Original Author: Michael Buesch <mb@bu3sch.de> net, vortex: fix lockup Ingo Molnar reported: -tip testing found that Johannes Berg's "softirq: remove irqs_disabled warning from local_bh_enable" enhancement to lockdep triggers a new warning on an old testbox that uses 3c59x vortex and netlogging: -----> calling vortex_init+0x0/0xb0 PCI: Found IRQ 10 for device 0000:00:0b.0 PCI: Sharing IRQ 10 with 0000:00:0a.0 PCI: Sharing IRQ 10 with 0000:00:0b.1 3c59x: Donald Becker and others. 0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at e0800400. PCI: Enabling bus mastering for device 0000:00:0b.0 initcall vortex_init+0x0/0xb0 returned 0 after 47 msecs ... calling init_netconsole+0x0/0x1b0 netconsole: local port 4444 netconsole: local IP 10.0.1.9 netconsole: interface eth0 netconsole: remote port 4444 netconsole: remote IP 10.0.1.16 netconsole: remote ethernet address 00:19:xx:xx:xx:xx netconsole: device eth0 not up yet, forcing it eth0: setting half-duplex. eth0: setting full-duplex. ------------[ cut here ]------------ WARNING: at kernel/softirq.c:137 local_bh_enable_ip+0xd1/0xe0() Pid: 1, comm: swapper Not tainted 2.6.26-rc6-tip #2091 [<c0125ecf>] warn_on_slowpath+0x4f/0x70 [<c0126834>] ? release_console_sem+0x1b4/0x1d0 [<c0126d00>] ? vprintk+0x2a0/0x450 [<c012fde5>] ? __mod_timer+0xa5/0xc0 [<c046f7fd>] ? mdio_sync+0x3d/0x50 [<c0160ef6>] ? marker_probe_cb+0x46/0xa0 [<c0126ed7>] ? printk+0x27/0x50 [<c046f4c3>] ? vortex_set_duplex+0x43/0xc0 [<c046f521>] ? vortex_set_duplex+0xa1/0xc0 [<c0471b92>] ? vortex_timer+0xe2/0x3e0 [<c012b361>] local_bh_enable_ip+0xd1/0xe0 [<c08d9f9f>] _spin_unlock_bh+0x2f/0x40 [<c0471b92>] vortex_timer+0xe2/0x3e0 [<c014743b>] ? trace_hardirqs_on+0xb/0x10 [<c0147358>] ? trace_hardirqs_on_caller+0x88/0x160 [<c012f8b2>] run_timer_softirq+0x162/0x1c0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c012b361>] local_bh_enable_ip+0xd1/0xe0 [<c08d9f9f>] _spin_unlock_bh+0x2f/0x40 [<c0471b92>] vortex_timer+0xe2/0x3e0 [<c014743b>] ? trace_hardirqs_on+0xb/0x10 [<c0147358>] ? trace_hardirqs_on_caller+0x88/0x160 [<c012f8b2>] run_timer_softirq+0x162/0x1c0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c0471ab0>] ? vortex_timer+0x0/0x3e0 [<c012b60a>] __do_softirq+0x9a/0x160 [<c012b570>] ? __do_softirq+0x0/0x160 [<c0106775>] call_on_stack+0x15/0x30 [<c012b4f5>] ? irq_exit+0x55/0x60 [<c0106e85>] ? do_IRQ+0x85/0xd0 [<c0147391>] ? trace_hardirqs_on_caller+0xc1/0x160 [<c0104888>] ? common_interrupt+0x28/0x30 [<c08d8ac8>] ? mutex_unlock+0x8/0x10 [<c08d8180>] ? _cond_resched+0x10/0x30 [<c07a3be7>] ? netpoll_setup+0x117/0x390 [<c0cbfcfe>] ? init_netconsole+0x14e/0x1b0 [<c013d539>] ? ktime_get+0x19/0x40 [<c0c9bab2>] ? kernel_init+0x1b2/0x2c0 [<c0cbfbb0>] ? init_netconsole+0x0/0x1b0 [<c0396aa4>] ? trace_hardirqs_on_thunk+0xc/0x10 [<c0103f12>] ? restore_nocheck_notrace+0x0/0xe [<c0c9b900>] ? kernel_init+0x0/0x2c0 [<c0c9b900>] ? kernel_init+0x0/0x2c0 [<c0104aa7>] ? kernel_thread_helper+0x7/0x10 ======================= ---[ end trace 37f9c502aff112e0 ]--- console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1b0 returned 0 after 2914 msecs looking at the driver I think the bug is real and the fix actually is trivial. vp->lock is also taken in hardware IRQ context, so we _have_ to always use irqsafe locking. As we run in a timer with IRQs disabled, we can simply use spin_lock. Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Pekka Enberg authored
Fixes a sparse warning in a code block that's hidden under JUMBO_FRAME #ifdef. Tested-by: Andrew Savchenko <Bircoph@list.ru> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Pekka Enberg authored
Make jumbo frame support compile again. It was broken by the cleanup series before the merge because the code is hidden under JUMBO_FRAME #ifdef. Tested-by: Andrew Savchenko <Bircoph@list.ru> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Julia Lawall authored
Taking sizeof the result of sizeof is quite strange and does not seem to be what is wanted here. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; @@ - sizeof ( sizeof (E) - ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Komuro authored
Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jeff Kirsher authored
EEH is not recovering in a reasonable amount of time on PPC during e1000e_down(). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Jeff Kirsher authored
EEH is not recovering in a reasonable amount of time on PPC during igb_down(). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Paul Larson authored
EEh is not recovering in a resonable amount of time on PPC during ixgbe_down(). Signed-off-by: Paul Larson <pl@us.ibm.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Atsushi Nemoto authored
On Rx FIFO overflow error, the controller consume a buffer descriptor but currently the driver does not give it back to the controller. This results unrecoverable 'Buffer List Exhausted' condition. This patch fix this problem by moving a "fbl_count--" line to proper place. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Atsushi Nemoto authored
Call netif_carrier_off() before starting PHY device. This is a behavior before converting to generic PHY layer. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Michal Schmidt authored
The documentation for intr_type module parameter of the s2io driver is not consistent with the code. The comments in drivers/net/s2io.c are OK, but Documentation/networking/s2io.txt is wrong. Pointed out by Andrew Hecox. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
- 24 Jun, 2008 1 commit
-
-
Patrick McHardy authored
Rerouting should only happen in LOCAL_OUT, in INPUT its useless since the packet has already chosen its final destination. Noticed by Alexey Dobriyan <adobriyan@gmail.com>. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Jun, 2008 3 commits
-
-
Eric W. Biederman authored
Alexey Dobriyan <adobriyan@gmail.com> writes: > Subject: ICMP sockets destruction vs ICMP packets oops > After icmp_sk_exit() nuked ICMP sockets, we get an interrupt. > icmp_reply() wants ICMP socket. > > Steps to reproduce: > > launch shell in new netns > move real NIC to netns > setup routing > ping -i 0 > exit from shell > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [<ffffffff803fce17>] icmp_sk+0x17/0x30 > PGD 17f3cd067 PUD 17f3ce067 PMD 0 > Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC > CPU 0 > Modules linked in: usblp usbcore > Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4 > RIP: 0010:[<ffffffff803fce17>] [<ffffffff803fce17>] icmp_sk+0x17/0x30 > RSP: 0018:ffffffff8057fc30 EFLAGS: 00010286 > RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900 > RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800 > RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815 > R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28 > R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800 > FS: 0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0) > Stack: 0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4 > ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246 > 000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436 > Call Trace: > <IRQ> [<ffffffff803fcfe4>] icmp_reply+0x44/0x1e0 > [<ffffffff803d3a0a>] ? ip_route_input+0x23a/0x1360 > [<ffffffff803fd645>] icmp_echo+0x65/0x70 > [<ffffffff803fd300>] icmp_rcv+0x180/0x1b0 > [<ffffffff803d6d84>] ip_local_deliver+0xf4/0x1f0 > [<ffffffff803d71bb>] ip_rcv+0x33b/0x650 > [<ffffffff803bb16a>] netif_receive_skb+0x27a/0x340 > [<ffffffff803be57d>] process_backlog+0x9d/0x100 > [<ffffffff803bdd4d>] net_rx_action+0x18d/0x250 > [<ffffffff80237be5>] __do_softirq+0x75/0x100 > [<ffffffff8020c97c>] call_softirq+0x1c/0x30 > [<ffffffff8020f085>] do_softirq+0x65/0xa0 > [<ffffffff80237af7>] irq_exit+0x97/0xa0 > [<ffffffff8020f198>] do_IRQ+0xa8/0x130 > [<ffffffff80212ee0>] ? mwait_idle+0x0/0x60 > [<ffffffff8020bc46>] ret_from_intr+0x0/0xf > <EOI> [<ffffffff80212f2c>] ? mwait_idle+0x4c/0x60 > [<ffffffff80212f23>] ? mwait_idle+0x43/0x60 > [<ffffffff8020a217>] ? cpu_idle+0x57/0xa0 > [<ffffffff8040f380>] ? rest_init+0x70/0x80 > Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 > 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08 > 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00 > RIP [<ffffffff803fce17>] icmp_sk+0x17/0x30 > RSP <ffffffff8057fc30> > CR2: 0000000000000000 > ---[ end trace ea161157b76b33e8 ]--- > Kernel panic - not syncing: Aiee, killing interrupt handler! Receiving packets while we are cleaning up a network namespace is a racy proposition. It is possible when the packet arrives that we have removed some but not all of the state we need to fully process it. We have the choice of either playing wack-a-mole with the cleanup routines or simply dropping packets when we don't have a network namespace to handle them. Since the check looks inexpensive in netif_receive_skb let's just drop the incoming packets. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
As noticed by Gabriel Campana, the kmalloc() length arg passed in by sctp_getsockopt_local_addrs_old() can overflow if ->addr_num is large enough. Therefore, enforce an appropriate limit. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 19 Jun, 2008 2 commits
-
-
YOSHIFUJI Hideaki authored
[ Based upon original report and patch by Karsten Keil. Karsten has verified that this fixes the TAHI test case "ICMPv6 test v6LC.5.1.2 Part F". -DaveM ] Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shan Wei authored
Remove the sticky Hop-by-Hop options header by calling setsockopt() for IPV6_HOPOPTS with a zero option length, per RFC3542. Routing header and Destination options header does the same as Hop-by-Hop options header. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Jun, 2008 15 commits
-
-
Johannes Berg authored
When a driver rejects a frame in it's ->tx() callback, it must also stop queues, otherwise mac80211 can go into a loop here. Detect this situation and abort the loop after five retries, warning about the driver bug. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
genetlink has a circular locking dependency when dumping the registered families: - dump start: genl_rcv() : take genl_mutex genl_rcv_msg() : call netlink_dump_start() while holding genl_mutex netlink_dump_start(), netlink_dump() : take nlk->cb_mutex ctrl_dumpfamily() : try to detect this case and not take genl_mutex a second time - dump continuance: netlink_rcv() : call netlink_dump netlink_dump : take nlk->cb_mutex ctrl_dumpfamily() : take genl_mutex Register genl_lock as callback mutex with netlink to fix this. This slightly widens an already existing module unload race, the genl ops used during the dump might go away when the module is unloaded. Thomas Graf is working on a seperate fix for this. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 608961a5. The problem is that the mac80211 stack not only needs to be able to muck with the link-level headers, it also might need to mangle all of the packet data if doing sw wireless encryption. This fixes kernel bugzilla #10903. Thanks to Didier Raboud (for the bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for bringing this bisection analysis to my attention), and Ilpo (for trying to analyze this purely from the TCP side). In 2.6.27 we can take another stab at this, by using something like skb_cow_data() when the TX path of mac80211 ends up with a non-NULL tx->key. The ESP protocol code in the IPSEC stack can be used as a model for implementation. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rainer Weikusat authored
The unix_dgram_sendmsg routine implements a (somewhat crude) form of receiver-imposed flow control by comparing the length of the receive queue of the 'peer socket' with the max_ack_backlog value stored in the corresponding sock structure, either blocking the thread which caused the send-routine to be called or returning EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET sockets. The poll-implementation for these socket types is datagram_poll from core/datagram.c. A socket is deemed to be writeable by this routine when the memory presently consumed by datagrams owned by it is less than the configured socket send buffer size. This is always wrong for connected PF_UNIX non-stream sockets when the abovementioned receive queue is currently considered to be full. 'poll' will then return, indicating that the socket is writeable, but a subsequent write result in EAGAIN, effectively causing an (usual) application to 'poll for writeability by repeated send request with O_NONBLOCK set' until it has consumed its time quantum. The change below uses a suitably modified variant of the datagram_poll routines for both type of PF_UNIX sockets, which tests if the recv-queue of the peer a socket is connected to is presently considered to be 'full' as part of the 'is this socket writeable'-checking code. The socket being polled is additionally put onto the peer_wait wait queue associated with its peer, because the unix_dgram_sendmsg routine does a wake up on this queue after a datagram was received and the 'other wakeup call' is done implicitly as part of skb destruction, meaning, a process blocked in poll because of a full peer receive queue could otherwise sleep forever if no datagram owned by its socket was already sitting on this queue. Among this change is a small (inline) helper routine named 'unix_recvq_full', which consolidates the actual testing code (in three different places) into a single location. Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Ang Way Chuang authored
By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang <wcang@nav6.org> Acked-by: Max Krasnyansky <maxk@qualcomm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Radu Cristescu authored
The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: Radu Cristescu <advantis@gmx.net> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
David Brownell authored
Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
David Brownell authored
Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Stephen Hemminger authored
Missed one pci id for 88E8040T. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Dhananjay Phadke authored
This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
Josh Boyer authored
The ibm_newemac driver requires ether_crc to be defined. Apparently it is possible to generate a .config without CONFIG_CRC32 set which causes the following link errors if IBM_NEW_EMAC is selected: LD .tmp_vmlinux1 drivers/built-in.o: In function `emac_hash_mc': core.c:(.text+0x2f524): undefined reference to `crc32_le' core.c:(.text+0x2f528): undefined reference to `bitrev32' make: *** [.tmp_vmlinux1] Error 1 This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
-
- 17 Jun, 2008 4 commits
-
-
Steffen Klassert authored
When generating the ip header for the transformed packet we just copy the frag_off field of the ip header from the original packet to the ip header of the new generated packet. If we receive a packet as a chain of fragments, all but the last of the new generated packets have the IP_MF flag set. We have to mask the frag_off field to only keep the IP_DF flag from the original packet. This got lost with git commit 36cf9acf ("[IPSEC]: Separate inner/outer mode processing on output") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
The H.245 helper is not registered/unregistered, but assigned to connections manually from the Q.931 helper. This means on unload existing expectations and connections using the helper are not cleaned up, leading to the following oops on module unload: CPU 0 Unable to handle kernel paging request at virtual address c00a6828, epc == 802224dc, ra == 801d4e7c Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000004 c00a67f0 $ 4 : 802a5ad0 81657e00 00000000 00000000 $ 8 : 00000008 801461c8 00000000 80570050 $12 : 819b0280 819b04b0 00000006 00000000 $16 : 802a5a60 80000000 80b46000 80321010 $20 : 00000000 00000004 802a5ad0 00000001 $24 : 00000000 802257a8 $28 : 802a4000 802a59e8 00000004 801d4e7c Hi : 0000000b Lo : 00506320 epc : 802224dc ip_conntrack_help+0x38/0x74 Tainted: P ra : 801d4e7c nf_iterate+0xbc/0x130 Status: 1000f403 KERNEL EXL IE Cause : 00800008 BadVA : c00a6828 PrId : 00019374 Modules linked in: ip_nat_pptp ip_conntrack_pptp ath_pktlog wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_xauth ath_pci ath_dev ath_dfs ath_rate_atheros wlan ath_hal ip_nat_tftp ip_conntrack_tftp ip_nat_ftp ip_conntrack_ftp pppoe ppp_async ppp_deflate ppp_mppe pppox ppp_generic slhc Process swapper (pid: 0, threadinfo=802a4000, task=802a6000) Stack : 801e7d98 00000004 802a5a60 80000000 801d4e7c 801d4e7c 802a5ad0 00000004 00000000 00000000 801e7d98 00000000 00000004 802a5ad0 00000000 00000010 801e7d98 80b46000 802a5a60 80320000 80000000 801d4f8c 802a5b00 00000002 80063834 00000000 80b46000 802a5a60 801e7d98 80000000 802ba854 00000000 81a02180 80b7e260 81a021b0 819b0000 819b0000 80570056 00000000 00000001 ... Call Trace: [<801e7d98>] ip_finish_output+0x0/0x23c [<801d4e7c>] nf_iterate+0xbc/0x130 [<801d4e7c>] nf_iterate+0xbc/0x130 [<801e7d98>] ip_finish_output+0x0/0x23c [<801e7d98>] ip_finish_output+0x0/0x23c [<801d4f8c>] nf_hook_slow+0x9c/0x1a4 One way to fix this would be to split helper cleanup from the unregistration function and invoke it for the H.245 helper, but since ctnetlink needs to be able to find the helper for synchonization purposes, a better fix is to register it normally and make sure its not assigned to connections during helper lookup. The missing l3num initialization is enough for this, this patch changes it to use AF_UNSPEC to make it more explicit though. Reported-by: liannan <liannan@twsz.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Properly free h323_buffer when helper registration fails. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Fix three ct_extend/NAT extension related races: - When cleaning up the extension area and removing it from the bysource hash, the nat->ct pointer must not be set to NULL since it may still be used in a RCU read side - When replacing a NAT extension area in the bysource hash, the nat->ct pointer must be assigned before performing the replacement - When reallocating extension storage in ct_extend, the old memory must not be freed immediately since it may still be used by a RCU read side Possibly fixes https://bugzilla.redhat.com/show_bug.cgi?id=449315 and/or http://bugzilla.kernel.org/show_bug.cgi?id=10875Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-