On Wed, 2008-04-23 at 13:38 +0300, Tomas Winkler wrote:
> This patch fixes problem in Makefile that prevented
> built-in compilation of iwlcore

Here is the second part. Without this,
drivers/net/wireless/iwlwifi/build-in.o will not be linked into vmlinux.
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Noticed by Alan Cox.

The IFF_UP test is a bit racey, because other entities
outside of this driver's ioctl handler can modify that
state, even though this ioctl handler runs under
lock_kernel().
Signed-off-by: David S. Miller <davem@davemloft.net>

Use stats which now is in the net_device instead of one declared in
ppp structure.
Kill ppp_net_stats function, because by default it is used identical
internal_stats function from net/core/dev.c
Signed-of-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit b716bb91 ("iwlwifi: Cancel scanning upon association") moved the
test of priv->vif in iwl{3945,4964}_mac_config_interface() outside of
where priv->mutex is held, but still tries to do mutex_unlock() on
return.  This is clearly wrong and triggers a nasty lockdep warning when
this codepath is triggered.  Fix this by removing the mutex_unlock().
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

priv->param_workaround_interval is unsigned, modparam_workaround_interval not.
the former is never < 0.
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

previously in this function:

u32 index = (dwrq->flags & IW_ENCODE_INDEX) - 1;

index is unsigned, so if -1, the original test (below) didn't work.
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch updates mesh EID values, some of which where conflicting with
already-approved 11h EIDs (pointed out by Tomas Winkler). I wanted to use the
values suggested in the last available 802.11 draft (2.0) but it assigns 50 to
MESH_CONFIG, the same value than EXT_SUPP_RATES. Using the values proposed in
the draft incremented by one.
Signed-off-by: Luis Carlos Cobo <luisca@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Some mainboards/CPUs don't allow DMA masks bigger than a certain limit.
Some VIA crap^h^h^h^hdevices have an upper limit of 0xFFFFFFFF. So in this
case a 64-bit b43 device would always fail to acquire the mask.
Implement a workaround to fallback to lower DMA mask, as we can always
also support a lower mask.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes use of Qdisc length in requeue function, before we checked
the reference is valid. (Adrian Bunk's catch)
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes an off-by-one in net/mac80211/rx.c introduced by
commit 8318d78a
(cfg80211 API for channels/bitrates, mac80211 and driver conversion)
and spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The put routine first decrements the users counter and then
(if it is zero) locks the sta_bss_lock and removes one from
the list and the hash.

Thus, any of ieee80211_sta_config_auth, ieee80211_rx_bss_get
or ieee80211_rx_mesh_bss_get can race with it by finding a
bss that is about to get kfree-ed.

Using atomic_dec_and_lock in ieee80211_rx_bss_put takes care
of this race.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

 *Fix radio chip identification on AR5424/2424 during ath5k_hw_attach
 *Try to assign an RF2413 radio on AR2424 for testing

 Changes-licensed-under: ISC
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

In the SSB SPROM a field set to all ones means the value
is not defined in the SPROM.
In case of the boardflags, we need to set them to zero
to avoid confusing drivers. Drivers will only check the
flags by ANDing.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Gabor Stefanik <netrolller.3d@gmail.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This adds more workarounds for devices with broken BT bits.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The HostFlags are a bitmask of 48bit. So we must use an u64 datatype
to hold all bits.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This adds a workaround for invalid bluetooth SPROM settings
on ASUS PCI cards.
This will stop the microcode from poking with the BT GPIO line.
This fixes data transmission on this device, as the BT GPIO line
is used for something TX related on this device
(probably the power amplifier or the radio).
This also adds a modparam knob to help debugging this in the future,
as more devices with this bug may show up.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This updates the mac80211 maintainers entry to
 1) remove Jiri
 2) put me first
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Michael Wu <flamingice@sourmilk.net>
Cc: Jiri Benc <jbenc@suse.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

There are two structures named wmm_info and wmm_param, they are used while
parsing the beacon frame. (Check the function ieee802_11_parse_elems).
Certain APs like D-link does not set the fifth bit in WMM IE.
While sending the association request to n-only ap it checks for wmm_ie.
If it is set then only ieee80211_ht_cap is sent during association request.
So n-only association fails.
And this patch fixes this problem by copying the wmm_info to wmm_ie,
which enables the "wmm" flag in iee80211_send_assoc.
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com>
Acked-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes problem in Makefile that prevented
built-in compilation of iwlcore

Commit that caused this problem: eadd3c4b ("iwlwifi: make Makefile
more concise")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Yi Zhu <yi.zhu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the removal of the Solaris binary emulation the exports of 
move_addr_to_{kernel,user} are no longer used.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The LEDS infrastructure itself does not require anything
that a platform dependant upon HAS_IOMEM.

The individual drivers do, but they are properly guarded
with the necessary platform dependencies.

One can even imagine a hypervisor based LED driver that
a platform without HAS_IOMEM might have.
Signed-off-by: David S. Miller <davem@davemloft.net>

As it stands it's impossible to use any authentication algorithms
with an ID above 31 portably.  It just happens to work on x86 but
fails miserably on ppc64.

The reason is that we're using a bit mask to check the algorithm
ID but the mask is only 32 bits wide.

After looking at how this is used in the field, I have concluded
that in the long term we should phase out state matching by IDs
because this is made superfluous by the reqid feature.  For current
applications, the best solution IMHO is to allow all algorithms when
the bit masks are all ~0.

The following patch does exactly that.

This bug was identified by IBM when testing on the ppc64 platform
using the NULL authentication algorithm which has an ID of 251.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sorry I have just realized set_normalized_timespec() (used in
timespec_sub()) is not exported, and link will fail because of it...
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make use of tcp before macro.
Signed-off-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

These cli()/sti() calls are made in start_timer() and are therefor
redundant since the register_lock is now used to protect register
io from within scc_isr() and write_scc() (where all calls to
start_timer() originate).
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netns start-stop engine can happily live with any of
init or exit callbacks set to NULL.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

What do_gettimeofday() does is to call getnstimeofday() and
to convert the result from timespec{} to timeval{}.
We do not always need timeval{} and we can convert timespec{}
when we really need (to print).
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ip6_route_net_init() performs some unneeded actions.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The del_timer() function doesn't guarantee, that the timer callback
is not active by the time it exits.

Thus, the fib6_net_exit() may kfree() all the data, that is required
by the fib6_run_gc(). The race window is tiny, but slab poisoning can
trigger this bug.

Using del_timer_sync() will cure this.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

What do_gettimeofday() does is to call getnstimeofday() and
to convert the result from timespec{} to timeval{}.
After that, these callers convert the result again to msec.
Use getnstimeofday() and convert the units at once.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes the needlessly global icmp_sk_init() static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes the needlessly global struct
ip6_prohibit_entry_template static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a trivial fix to correct function name in a comment in
net/ipv4/tcp.c.
Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Expose dev_id to userspace, because it helps to disambiguate between
interfaces where the MAC address is unique.

This should allow us to simplify the handling of persistent naming for
S390 network devices in udev -- because it can depend on a simple
attribute of the device like the other match criteria, rather than
having a special case for SUBSYSTEMS=="ccwgroup".
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add kernel-doc notation for ndisc_nodetype:

Warning(linux-2.6.25-git2//include/linux/skbuff.h:340): No description found for parameter 'ndisc_nodetype'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[ INFO: possible recursive locking detected ]
2.6.25 #3
---------------------------------------------
ax25ipd/3811 is trying to acquire lock:
  (rose_node_list_lock){-+..}, at: [<f8d31f1a>] rose_get_neigh+0x1a/0xa0 
[rose]

but task is already holding lock:
  (rose_node_list_lock){-+..}, at: [<f8d31fed>] 
rose_route_frame+0x4d/0x620 [rose]

other info that might help us debug this:
6 locks held by ax25ipd/3811:
  #0:  (&tty->atomic_write_lock){--..}, at: [<c0259a1c>] 
tty_write_lock+0x1c/0x50
  #1:  (rcu_read_lock){..--}, at: [<c02aea36>] net_rx_action+0x96/0x230
  #2:  (rcu_read_lock){..--}, at: [<c02ac5c0>] netif_receive_skb+0x100/0x2f0
  #3:  (rose_node_list_lock){-+..}, at: [<f8d31fed>] 
rose_route_frame+0x4d/0x620 [rose]
  #4:  (rose_neigh_list_lock){-+..}, at: [<f8d31ff7>] 
rose_route_frame+0x57/0x620 [rose]
  #5:  (rose_route_list_lock){-+..}, at: [<f8d32001>] 
rose_route_frame+0x61/0x620 [rose]

stack backtrace:
Pid: 3811, comm: ax25ipd Not tainted 2.6.25 #3
  [<c0147e27>] print_deadlock_bug+0xc7/0xd0
  [<c0147eca>] check_deadlock+0x9a/0xb0
  [<c0149cd2>] validate_chain+0x1e2/0x310
  [<c0149b95>] ? validate_chain+0xa5/0x310
  [<c010a7d8>] ? native_sched_clock+0x88/0xc0
  [<c0149fa1>] __lock_acquire+0x1a1/0x750
  [<c014a5d1>] lock_acquire+0x81/0xa0
  [<f8d31f1a>] ? rose_get_neigh+0x1a/0xa0 [rose]
  [<c03201a3>] _spin_lock_bh+0x33/0x60
  [<f8d31f1a>] ? rose_get_neigh+0x1a/0xa0 [rose]
  [<f8d31f1a>] rose_get_neigh+0x1a/0xa0 [rose]
  [<f8d32404>] rose_route_frame+0x464/0x620 [rose]
  [<c031ffdd>] ? _read_unlock+0x1d/0x20
  [<f8d31fa0>] ? rose_route_frame+0x0/0x620 [rose]
  [<f8d1c396>] ax25_rx_iframe+0x66/0x3b0 [ax25]
  [<f8d1f42f>] ? ax25_start_t3timer+0x1f/0x40 [ax25]
  [<f8d1e65b>] ax25_std_frame_in+0x7fb/0x890 [ax25]
  [<c0320005>] ? _spin_unlock_bh+0x25/0x30
  [<f8d1bdf6>] ax25_kiss_rcv+0x2c6/0x800 [ax25]
  [<c02a4769>] ? sock_def_readable+0x59/0x80
  [<c014a8a7>] ? __lock_release+0x47/0x70
  [<c02a4769>] ? sock_def_readable+0x59/0x80
  [<c031ffdd>] ? _read_unlock+0x1d/0x20
  [<c02a4769>] ? sock_def_readable+0x59/0x80
  [<c02a4d3a>] ? sock_queue_rcv_skb+0x13a/0x1d0
  [<c02a4c45>] ? sock_queue_rcv_skb+0x45/0x1d0
  [<f8d1bb30>] ? ax25_kiss_rcv+0x0/0x800 [ax25]
  [<c02ac715>] netif_receive_skb+0x255/0x2f0
  [<c02ac5c0>] ? netif_receive_skb+0x100/0x2f0
  [<c02af05c>] process_backlog+0x7c/0xf0
  [<c02aeb0c>] net_rx_action+0x16c/0x230
  [<c02aea36>] ? net_rx_action+0x96/0x230
  [<c012bd53>] __do_softirq+0x93/0x120
  [<f8d2a68a>] ? mkiss_receive_buf+0x33a/0x3f0 [mkiss]
  [<c012be37>] do_softirq+0x57/0x60
  [<c012c265>] local_bh_enable_ip+0xa5/0xe0
  [<c0320005>] _spin_unlock_bh+0x25/0x30
  [<f8d2a68a>] mkiss_receive_buf+0x33a/0x3f0 [mkiss]
  [<c025ea37>] pty_write+0x47/0x60
  [<c025c620>] write_chan+0x1b0/0x220
  [<c0259a1c>] ? tty_write_lock+0x1c/0x50
  [<c011fec0>] ? default_wake_function+0x0/0x10
  [<c0259bea>] tty_write+0x12a/0x1c0
  [<c025c470>] ? write_chan+0x0/0x220
  [<c018bbc6>] vfs_write+0x96/0x130
  [<c0259ac0>] ? tty_write+0x0/0x1c0
  [<c018c24d>] sys_write+0x3d/0x70
  [<c0104d1e>] sysenter_past_esp+0x5f/0xa5
  =======================
BUG: soft lockup - CPU#0 stuck for 61s! [ax25ipd:3811]

Pid: 3811, comm: ax25ipd Not tainted (2.6.25 #3)
EIP: 0060:[<c010a9db>] EFLAGS: 00000246 CPU: 0
EIP is at native_read_tsc+0xb/0x20
EAX: b404aa2c EBX: b404a9c9 ECX: 017f1000 EDX: 0000076b
ESI: 00000001 EDI: 00000000 EBP: ecc83afc ESP: ecc83afc
  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
CR0: 8005003b CR2: b7f5f000 CR3: 2cd8e000 CR4: 000006f0
DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
DR6: ffff0ff0 DR7: 00000400
  [<c0204937>] delay_tsc+0x17/0x30
  [<c02048e9>] __delay+0x9/0x10
  [<c02127f6>] __spin_lock_debug+0x76/0xf0
  [<c0212618>] ? spin_bug+0x18/0x100
  [<c0147923>] ? __lock_contended+0xa3/0x110
  [<c0212998>] _raw_spin_lock+0x68/0x90
  [<c03201bf>] _spin_lock_bh+0x4f/0x60
  [<f8d31f1a>] ? rose_get_neigh+0x1a/0xa0 [rose]
  [<f8d31f1a>] rose_get_neigh+0x1a/0xa0 [rose]
  [<f8d32404>] rose_route_frame+0x464/0x620 [rose]
  [<c031ffdd>] ? _read_unlock+0x1d/0x20
  [<f8d31fa0>] ? rose_route_frame+0x0/0x620 [rose]
  [<f8d1c396>] ax25_rx_iframe+0x66/0x3b0 [ax25]
  [<f8d1f42f>] ? ax25_start_t3timer+0x1f/0x40 [ax25]
  [<f8d1e65b>] ax25_std_frame_in+0x7fb/0x890 [ax25]
  [<c0320005>] ? _spin_unlock_bh+0x25/0x30
  [<f8d1bdf6>] ax25_kiss_rcv+0x2c6/0x800 [ax25]
  [<c02a4769>] ? sock_def_readable+0x59/0x80
  [<c014a8a7>] ? __lock_release+0x47/0x70
  [<c02a4769>] ? sock_def_readable+0x59/0x80
  [<c031ffdd>] ? _read_unlock+0x1d/0x20
  [<c02a4769>] ? sock_def_readable+0x59/0x80
  [<c02a4d3a>] ? sock_queue_rcv_skb+0x13a/0x1d0
  [<c02a4c45>] ? sock_queue_rcv_skb+0x45/0x1d0
  [<f8d1bb30>] ? ax25_kiss_rcv+0x0/0x800 [ax25]
  [<c02ac715>] netif_receive_skb+0x255/0x2f0
  [<c02ac5c0>] ? netif_receive_skb+0x100/0x2f0
  [<c02af05c>] process_backlog+0x7c/0xf0
  [<c02aeb0c>] net_rx_action+0x16c/0x230
  [<c02aea36>] ? net_rx_action+0x96/0x230
  [<c012bd53>] __do_softirq+0x93/0x120
  [<f8d2a68a>] ? mkiss_receive_buf+0x33a/0x3f0 [mkiss]
  [<c012be37>] do_softirq+0x57/0x60
  [<c012c265>] local_bh_enable_ip+0xa5/0xe0
  [<c0320005>] _spin_unlock_bh+0x25/0x30
  [<f8d2a68a>] mkiss_receive_buf+0x33a/0x3f0 [mkiss]
  [<c025ea37>] pty_write+0x47/0x60
  [<c025c620>] write_chan+0x1b0/0x220
  [<c0259a1c>] ? tty_write_lock+0x1c/0x50
  [<c011fec0>] ? default_wake_function+0x0/0x10
  [<c0259bea>] tty_write+0x12a/0x1c0
  [<c025c470>] ? write_chan+0x0/0x220
  [<c018bbc6>] vfs_write+0x96/0x130
  [<c0259ac0>] ? tty_write+0x0/0x1c0
  [<c018c24d>] sys_write+0x3d/0x70
  [<c0104d1e>] sysenter_past_esp+0x5f/0xa5
  =======================

Since rose_route_frame() does not use rose_node_list we can safely
remove rose_node_list_lock spin lock here and let it be free for
rose_get_neigh().
Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

================================================
[ BUG: lock held when returning to user space! ]
------------------------------------------------
xfbbd/3683 is leaving the kernel with locks still held!
1 lock held by xfbbd/3683:
  #0:  (sk_lock-AF_ROSE){--..}, at: [<c8cd1eb3>] rose_connect+0x73/0x420 [rose]

INFO: task xfbbd:3683 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
xfbbd         D 00000246     0  3683   3669
        c6965ee0 00000092 c02c5c40 00000246 c0f6b5f0 c0f6b5c0 c0f6b5f0 c0f6b5c0
        c0f6b614 c6965f18 c024b74b ffffffff c06ba070 00000000 00000000 00000001
        c6ab07c0 c012d450 c0f6b634 c0f6b634 c7b5bf10 c0d6004c c7b5bf10 c6965f40
Call Trace:
  [<c024b74b>] lock_sock_nested+0x6b/0xd0
  [<c012d450>] ? autoremove_wake_function+0x0/0x40
  [<c02488f1>] sock_fasync+0x41/0x150
  [<c0249e69>] sock_close+0x19/0x40
  [<c0175d54>] __fput+0xb4/0x170
  [<c0176018>] fput+0x18/0x20
  [<c017300e>] filp_close+0x3e/0x70
  [<c01744e9>] sys_close+0x69/0xb0
  [<c0103bda>] sysenter_past_esp+0x5f/0xa5
  =======================
INFO: lockdep is turned off.
Signed-off-by: Bernard Pidoux <f6bvp@amsat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>