probe_irq_off() is disfunctional as the local nr_irqs is referenced
instead of the global one for the for_each_irq_desc() iterator.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Use for_each_irq_desc[_reverse] for all the iteration loops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

There is no need for irq_desc here. Even for sparse_irq we can
handle this clever in for_each_irq_nr().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Share more duplicated code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

show_interrupts() and proc helpers are basically the same for
32 and 64 bit. Move them to a shared source file.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

The sparseirq patches introduced some more ugliness in show_interrupts().
Clean it up all together and make the code easier to read by splitting out
the "tail" function  which prints the special interrupts.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Revert the dynarray changes. They need more thought and polishing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Remove the leftover of sparseirqs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This code is not ready, but we need to rip it out instead of rebasing
as we would lose the APIC/IO_APIC unification otherwise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

For the non sparse irq case an inline function is perfectly fine.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Move all of those to linux/irq.h where they belong.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

This code is not ready yet.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Revert the sparse irq changes in m68k/s390/sparc and just define
nr_irqs as NR_IRQS for those architectures.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Use APIC_DIVISOR being set to 16 for both 32/64bit
mode. To escape APIC timer underflow during calibration
set it to the maximum possible value.

Also typo error (CONFG instead of proper CONFIG) fixed.
The error was caught by Venkatesh Pallipadi, thanks a lot Venkatesh!

See details on http://lkml.org/lkml/2008/10/9/425Reported-by: Venkatesh Pallipad <venkatesh.pallipadi@intel.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Create /sys/firmware/sgi_uv sysfs entries for partition_id and coherence_id.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add a bios call to return partitioning related info.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add the EFI callback function and associated wrapper code.
Initialize SAL system table entry info at boot time.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Look for a UV entry in the EFI tables.
Signed-off-by: Russ Anderson <rja@sgi.com>
Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fix:

 arch/x86/kernel/uv_irq.c: In function 'uv_ack_apic':
 arch/x86/kernel/uv_irq.c:26: error: implicit declaration of function 'ack_APIC_irq'
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Provide a means for UV interrupt MMRs to be setup with the message to be sent
when an MSI is raised.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Fix the below compile warnings due to recent HPET MSI changes

arch/x86/kernel/hpet.c:48: warning: 'hpet_devs' defined but not used
arch/x86/kernel/hpet.c:50: warning: 'per_cpu__cpu_hpet_dev' defined but not used
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

v2: fix hpet compiling error
v3: Bjorn want to use dev_printk instead
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Clean up obscure for() cycle with straight while() form
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Arjan van de Ven noticed that we changed IRQ numbers from decimal
to hex in /proc/interrupts - that can break user-space utilities
like irqbalanced.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

when SPARSE_IRQ is not used, should still use irq_desc->lock
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Fix problem caused by reordering of the calls to uv_cpu_init() &
uv_system_init. Originally, uv_cpu_init() was called AFTER uv_system_init.
This order was recently broken as a side-effect of other patches.

With this patch, initialization of cpu 0 is now done by the system_init
call.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Interrupt remapping could lead to NULL dereference in case of
kzalloc failed and memory leak in other way. So fix the
both cases.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

caused by

commit a532e19680ada3b8579b81e67e76d3ebd19c340f
Author: Yinghai Lu <yhlu.kernel@gmail.com>
Date:   Wed Aug 20 20:46:25 2008 -0700

    x86: sparse_irq needs spin_lock in allocations
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Steven Noonan reported a boot hang when using irqpoll and
CONFIG_HAVE_SPARSE_IRQ=y.

The irqpoll loop needs to be updated to not iterate from 1 to nr_irqs
but to iterate via for_each_irq_desc(). (in the former case desc can
be NULL which crashes the box)
Reported-by: Steven Noonan <steven@uplinklabs.net>
Tested-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Yinghai Lu reported:

| >  0 add_pin_to_irq: irq 15 --> apic 0 pin 15
| > IOAPIC[0]: Set routing entry (8-15 -> 0x3f -> IRQ 15 Mode:0 Active:0)
| >  8-16 8-17 8-18 8-19 8-20 8-21 8-22 8-23 (apicid-pin) not connected
| >  9-0 9-1 9-2 9-3 9-4 9-5 9-6 9-7 9-8 9-9 9-10 9-11 9-12 9-13 9-14 9-15
| > 9-16 9-17 9-18 9-19 9-20 9-21 9-22 9-23 (apicid-pin) not connected
| >
|
| only first one not connected at first, and ...

here is a quick fix for this.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If we don't have CONFIG_X86_PM_TIMER=y compiler warns about
unused variables. Move PM timer based calibration into a
separate function and make the code cleaner and the compiler
happy as well.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

On 82489DX we don't have ESR register so we should not
write it.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

lapic_setup_esr doesn't handle esr_disable inquire.
The error brought in during unification process.
Fix it.
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

... and tidy up the printouts. Suggested by Andrew Morton.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>