- 11 Jan, 2010 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/stagingLinus Torvalds authored
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Make PCI device ids constant hwmon: (coretemp) Fix TjMax for Atom N450/D410/D510 CPUs hwmon: (k10temp) Blacklist more family 10h processors hwmon: (asus_atk0110) Add debugfs interface hwmon: (asus_atk0110) Refactor interface probe code hwmon: (adt7462) Fix pin 28 monitoring
-
Avi Kivity authored
The list macros use LIST_POISON1 and LIST_POISON2 as undereferencable pointers in order to trap erronous use of freed list_heads. Unfortunately userspace can arrange for those pointers to actually be dereferencable, potentially turning an oops to an expolit. To avoid this allow architectures (currently x86_64 only) to override the default values for these pointers with truly-undereferencable values. This is easy on x86_64 as the virtual address space is large and contains areas that cannot be mapped. Other 64-bit architectures will likely find similar unmapped ranges. [ingo: switch to 0xdead000000000000 as the unmapped area] [ingo: add comments, cleanup] [jaswinder: eliminate sparse warnings] Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
Linus Torvalds authored
Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (26 commits) OMAP2 clock: dynamically allocate CPUFreq frequency table OMAP clock/CPUFreq: add clk_exit_cpufreq_table() OMAP2xxx OPP: clean up comments in OPP data OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled OMAP1 clock: remove __initdata from struct clk_functions to prevent crash OMAP1 clock: Add missing clocks for OMAP 7xx OMAP clock: remove incorrect EXPORT_SYMBOL()s OMAP3 clock: Add capability to change rate of dpll4_m5_ck OMAP3 clock: McBSP 2, 3, 4 functional clock parent is PER_96M_FCLK, not CORE_96M_FCLK OMAP3: clock: add clockdomains for UART1 & 2 OMAP2420 IO mapping: move IVA mapping virtual address out of vmalloc space OMAP2xxx IO mapping: mark DSP mappings as being 2420-only ARM: OMAP3: PM: Fix the Invalid CM_CLKSTCTRL reg access. OMAP2: remove duplicated #include omap3: EVM: Choose OMAP_PACKAGE_CBB omap3: Fix booting if package is uninitialized omap3: add missing parentheses omap3: add missing parentheses omap2/3: ZOOM: Correcting key mapping for few keys omap2/3: make serial_in_override() address the right uart port ...
-
David Howells authored
Update the defconfig for the ASB2303 platform. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
David Howells authored
Access to the ASB2305's PCnet32 NIC doesn't work correctly because when the NIC attempts to update the ring buffer flags by DMA, the change to RAM crops up about 17uS after the interrupt line is asserted. This is almost certainly due to a bug in the PCI bridge FPGA on that board. We can get around this by making dma_alloc_coherent() put the ring buffer in the SRAM attached to the PCI bridge rather than in the SDRAM. Signed-off-by:
-
David Howells authored
Insert PCI root bus resources for the MN10300-based ASB2305 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. We also add a reservation for the PCI SRAM region. Signed-off-by:
-
Bjorn Helgaas authored
Use the generic pci_enable_resources() instead of the arch-specific code. Unlike this arch-specific code, the generic version: - checks PCI_NUM_RESOURCES (11), not 6, resources - skips resources that have neither IORESOURCE_IO nor IORESOURCE_MEM set - skips ROM resources unless IORESOURCE_ROM_ENABLE is set - checks for resource collisions with "!r->parent" Signed-off-by:
Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by:
-
David Howells authored
Use KERN_ERR not KERN_ERROR in the ASB2305 platform code. Signed-off-by:
-
Al Viro authored
asm/cpu never existed for mn10300; the files they are looking for are in asm. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
David Howells authored
Wire up missing new system calls for MN10300. Signed-off-by:
David Howells <dhowelsl@redhat.com> Signed-off-by:
-
Mark Salter authored
gcc 4.2.1 for MN10300 is more agressive than the older gcc in reordering/moving other insns between an insn that sets flags and an insn that uses those flags. This leads to trouble with asm statements which are missing an explicit "cc" clobber. This patch adds the explicit "cc" clobber to asm statements which do indeed clobber the condition flags. Signed-off-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
-
Mark Salter authored
The gcc-4.2.1 based toolchain for MN10300 adds some new note sections which need to be stripped from the binary image. This patch takes care of that. Signed-off-by:
-
Mark Salter authored
This fixes a signal stack handling problem in the MN10300 arch. When new threads are cloned with CLONE_VM, they don't inherit the alternate signal stack. They do share the signal flags, though. When deciding whether to use an alternate stack, the arch code needs to check to make sure the task struct contains a valid alternate stack. This patch fixes the MN10300 arch by using the sas_ss_flags() test provided by sched.h rather than the on_sig_stack() test which is insufficient by itself. Signed-off-by:
-
OGAWA Hirofumi authored
commit abd6633c ("pnp: add a shutdown method to pnp drivers") adds shutdown method to bus driver blindly. With it, driver->shutdown is no longer valid. Use pnp_driver->shutdown instead. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14889Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by:
Malte Schröder <maltesch@gmx.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: David Hardeman <david@hardeman.nu> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: <stable@kernel.org> [2.6.32.x] Signed-off-by:
-
Minchan Kim authored
A long time ago we regarded zero page as file_rss and vm_normal_page doesn't return NULL. But now, we reinstated ZERO_PAGE and vm_normal_page's implementation can return NULL in case of zero page. Also we don't count it with file_rss any more. Then, RSS and PSS can't be matched. For consistency, Let's ignore zero page in smaps_pte_range. Signed-off-by:
Minchan Kim <minchan.kim@gmail.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Acked-by:
Matt Mackall <mpm@selenic.com> Reviewed-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Randy Dunlap authored
Remove comments about function short descriptions not allowed to be on multiple lines (that was fixed/changed recently). Add comments that function "section header:" names need to be unique per function/struct/union/typedef/enum. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Stephen Hemminger authored
menu: use proper 64 bit math The new menu governor is incorrectly doing a 64 bit divide. Compile tested only Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: <stable@kernel.org> Signed-off-by:
-
Randy Dunlap authored
Fix typos, grammos, spellos, hyphenation. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Andrea Arcangeli authored
sz is in bytes, MAX_ORDER_NR_PAGES is in pages. Signed-off-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
David Gibson <dwg@au1.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: David Rientjes <rientjes@google.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by:
-
Tomaz Mertelj authored
Signed-off-by: <tomaz.mertelj@guest.arnes.si> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jani Nikula authored
Previously enabled poll(2) support on one edge was never reconfigured when sysfs polarity change was triggered from kernel, because 'struct device *dev' shadowed an earlier definition. Found by sparse, which I should've run much earlier. Signed-off-by:
Jani Nikula <ext-jani.1.nikula@nokia.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Uwe Kleine-König authored
Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reported-by:
Josip Rodin <joy@entuzijast.net> Cc: Joe Perches <joe@perches.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Adrian Hunter authored
JEDEC eMMC specification version 4.4 (MMCA 4.4) defines Extended CSD structure versions up to 5. Signed-off-by:
Adrian Hunter <adrian.hunter@nokia.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Adrian Hunter authored
The main bug was that 'blk_cleanup_queue()' was called while the block device could still be in use, for example, because the card was removed while files were still open. In addition, to be sure that 'mmc_request()' will get called for all new requests (so it can error them out), the queue is emptied during cleanup. This is done after the worker thread is stopped to avoid racing with it. Finally, it is not a device error for this to be happening, so quiet the (sometimes very many) error messages. Signed-off-by:
-
Jarkko Lavinen authored
If mmc_blk_set_blksize() fails mmc_blk_probe() the request queue and its thread have been set up and they need to be shut down properly before putting the disk. Signed-off-by:
Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by:
-
Anna Lemehova authored
When a card is removed before mmc_blk_probe() has called add_disk(), then the minor field is uninitialized and has value 0. This caused mmc_blk_put() to always release devidx 0 even if 0 was still in use. Then the next mmc_blk_probe() used the first free idx of 0, which oopses in sysfs, since it is used by another card. Signed-off-by:
Anna Lemehova <EXT-Anna.Lemehova@nokia.com> Signed-off-by:
-
Randy Dunlap authored
Warning(drivers/base/power/main.c:453): No description found for parameter 'dev' Warning(drivers/base/power/main.c:453): No description found for parameter 'cb' Warning(drivers/base/power/main.c:719): No description found for parameter 'dev' Warning(drivers/base/power/main.c:719): No description found for parameter 'state' Warning(drivers/base/power/main.c:719): No description found for parameter 'cb' Signed-off-by:
-
KOSAKI Motohiro authored
Commit d899bf7b (procfs: provide stack information for threads) introduced to show stack information in /proc/{pid}/status. But it cause large performance regression. Unfortunately /proc/{pid}/status is used ps command too and ps is one of most important component. Because both to take mmap_sem and page table walk are heavily operation. If many process run, the ps performance is, [before d899bf7b] % perf stat ps >/dev/null Performance counter stats for 'ps': 4090.435806 task-clock-msecs # 0.032 CPUs 229 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 234 page-faults # 0.000 M/sec 8587565207 cycles # 2099.425 M/sec 9866662403 instructions # 1.149 IPC 3789415411 cache-references # 926.409 M/sec 30419509 cache-misses # 7.437 M/sec 128.859521955 seconds time elapsed [after d899bf7b] % perf stat ps > /dev/null Performance counter stats for 'ps': 4305.081146 task-clock-msecs # 0.028 CPUs 480 context-switches # 0.000 M/sec 2 CPU-migrations # 0.000 M/sec 237 page-faults # 0.000 M/sec 9021211334 cycles # 2095.480 M/sec 10605887536 instructions # 1.176 IPC 3612650999 cache-references # 839.160 M/sec 23917502 cache-misses # 5.556 M/sec 152.277819582 seconds time elapsed Thus, this patch revert it. Fortunately /proc/{pid}/task/{tid}/smaps provide almost same information. we can use it. Commit d899bf7b introduced two features: 1) Add the annotattion of [thread stack: xxxx] mark to /proc/{pid}/task/{tid}/maps. 2) Add StackUsage field to /proc/{pid}/status. I only revert (2), because I haven't seen (1) cause regression. Signed-off-by:
-
Florian Fainelli authored
MIPS compressed kernels output a vmlinuz file in the top-level directory (maybe others do). Add vmlinuz to the list of files to ignore by git. Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Maxime Bizon <mbizon@freebox.fr> Signed-off-by:
-
Andi Kleen authored
When print-fatal-signals is enabled it's possible to dump any memory reachable by the kernel to the log by simply jumping to that address from user space. Or crash the system if there's some hardware with read side effects. The fatal signals handler will dump 16 bytes at the execution address, which is fully controlled by ring 3. In addition when something jumps to a unmapped address there will be up to 16 additional useless page faults, which might be potentially slow (and at least is not very efficient) Fortunately this option is off by default and only there on i386. But fix it by checking for kernel addresses and also stopping when there's a page fault. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Dave Anderson authored
The LTP cgroup test suite generates a "kernel BUG at kernel/cgroup.c:790!" here in cgroup_diput(): /* * if we're getting rid of the cgroup, refcount should ensure * that there are no pidlists left. */ BUG_ON(!list_empty(&cgrp->pidlists)); The cgroup pidlist rework in 2.6.32 generates the BUG_ON, which is caused when pidlist_array_load() calls cgroup_pidlist_find(): (1) if a matching cgroup_pidlist is found, it down_write's the mutex of the pre-existing cgroup_pidlist, and increments its use_count. (2) if no matching cgroup_pidlist is found, then a new one is allocated, it down_write's its mutex, and the use_count is set to 0. (3) the matching, or new, cgroup_pidlist gets returned back to pidlist_array_load(), which increments its use_count -- regardless whether new or pre-existing -- and up_write's the mutex. So if a matching list is ever encountered by cgroup_pidlist_find() during the life of a cgroup directory, it results in an inflated use_count value, preventing it from ever getting released by cgroup_release_pid_array(). Then if the directory is subsequently removed, cgroup_diput() hits the BUG_ON() when it finds that the directory's cgroup is still populated with a pidlist. The patch simply removes the use_count increment when a matching pidlist is found by cgroup_pidlist_find(), because it gets bumped by the calling pidlist_array_load() function while still protected by the list's mutex. Signed-off-by:Dave Anderson <anderson@redhat.com> Reviewed-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Ben Blum <bblum@andrew.cmu.edu> Cc: Paul Menage <menage@google.com> Cc: <stable@kernel.org> Signed-off-by:
-
Joe Perches authored
The following command doesn't generate any output. `./scripts/get_maintainer.pl --no-git -f drivers/net/wireless/wl12xx/wl1271_acx.c` An excluded "X:" pattern match in any section would cause a file not to match any other section. Signed-off-by:
Joe Perches <joe@perches.com> Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Sascha Hauer authored
lib/rational.c:62: warning: data definition has no type or storage class lib/rational.c:62: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' lib/rational.c:62: warning: parameter names (without types) in function declaration Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Cc: Oskar Schirmer <os@emlix.com> Cc: <stable@kernel.org> Signed-off-by:
-
Albin Tonnerre authored
Signed-off-by:
Albin Tonnerre <albin.tonnerre@free-electrons.com> Tested-by:
Wu Zhangjin <wuzhangjin@gmail.com> Acked-by:
"H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by:
Russell King <rmk@arm.linux.org.uk> Acked-by:
-
Albin Tonnerre authored
The necessary changes to the x86 Kconfig and boot/compressed to allow the use of this new compression method Signed-off-by:
-
Albin Tonnerre authored
- changes to ach/arch/boot/Makefile to make it easier to add new compression types - new piggy.lzo.S necessary for lzo compression - changes in arch/arm/boot/compressed/misc.c to allow the use of lzo or gzip, depending on the config - Kconfig support Signed-off-by:
-
Albin Tonnerre authored
This patch series adds generic support for creating and extracting LZO-compressed kernel images, as well as support for using such images on the x86 and ARM architectures, and support for creating and using LZO-compressed initrd and initramfs images. Russell King said: : Testing on a Cortex A9 model: : - lzo decompressor is 65% of the time gzip takes to decompress a kernel : - lzo kernel is 9% larger than a gzip kernel : : which I'm happy to say confirms your figures when comparing the two. : : However, when comparing your new gzip code to the old gzip code: : - new is 99% of the size of the old code : - new takes 42% of the time to decompress than the old code : : What this means is that for a proper comparison, the results get even better: : - lzo is 7.5% larger than the old gzip'd kernel image : - lzo takes 28% of the time that the old gzip code took : : So the expense seems definitely worth the effort. The only reason I : can think of ever using gzip would be if you needed the additional : compression (eg, because you have limited flash to store the image.) : : I would argue that the default for ARM should therefore be LZO. This patch: The lzo compressor is worse than gzip at compression, but faster at extraction. Here are some figures for an ARM board I'm working on: Uncompressed size: 3.24Mo gzip 1.61Mo 0.72s lzo 1.75Mo 0.48s So for a compression ratio that is still relatively close to gzip, it's much faster to extract, at least in that case. This part contains: - Makefile routine to support lzo compression - Fixes to the existing lzo compressor so that it can be used in compressed kernels - wrapper around the existing lzo1x_decompress, as it only extracts one block at a time, while we need to extract a whole file here - config dialog for kernel compression [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: cleanup] Signed-off-by:
-
Joakim Tjernlund authored
JFFS2 uses lesser compression ratio and inflate always ends up in "copy direct from output" case. This patch tries to optimize the direct copy procedure. Uses get_unaligned() but only in one place. The copy loop just above this one can also use this optimization, but I havn't done so as I have not tested if it is a win there too. On my MPC8321 this is about 17% faster on my JFFS2 root FS than the original. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Roel Kluin <roel.kluin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Andrew Morton authored
__pcpu_ptr_to_addr() can be overridden by the architecture and might not behave well if passed a NULL pointer. So avoid calling it until we have verified that its arg is not NULL. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
