This change introduces a driver for the HTC PLD chip found
on some smartphones, such as the HTC Wizard and HTC Herald.
It works through the I2C bus and acts as a GPIO extender.
Specifically:

 * it can have several sub-devices, each with its own I2C
   address
 * Each sub-device provides 8 output and 8 input pins
 * The chip attaches to one GPIO to signal when any of the
   input GPIOs change -- at which point all chips must be
   scanned for changes

This driver implements the GPIOs throught the kernel's
GPIO and IRQ framework.  This allows any GPIO-servicing
drivers to operate on htcpld pins, such as the gpio-keys
and gpio-leds drivers.
Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

MAX8925 contains 3 Buck and 20 LDO regulator.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Enable max8925 backlight sub device.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Add subdevs in MAX8925. MAX8925 includes regulator, backlight and touch
components.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Basic Max8925 support, which is a power management IC from Maxim
Semiconductor.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Remove the support 88PM8607 A0/A1 stepping. There's some register
definition changes in B0 stepping. It can make software more efficient.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Enable touchscreen driver for the 88pm860x multi function core.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Enable led sub device in Marvell 88PM860x. Two LED arrays can be supported.
Each LED array can be used for R,G,B leds.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

At most, three backlight device can be supported in 88pm860x driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Append backlight, led & touch subdevs into 88pm860x driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

88PM860x is a complex PMIC device. It contains touch, charger, sound, rtc,
backlight, led, and so on.

Host communicates to 88PM860x by I2C bus. Use thread irq to support this
usage case.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Rename 88PM8607 to 88PM860X in both Makefile and Kconfig under mfd directory.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

88PM8606 and 88PM8607 are two discrete chips used for power management.
Hardware designer can use them together or only one of them according to
requirement.

There's some logic tightly linked between these two chips. For example, USB
charger driver needs to access both chips by I2C interface.

Now share one driver to these two devices. Only one I2C client is identified
in platform init data. If another chip is also used, user should mark it in
companion_addr field of platform init data. Then driver could create another
I2C client for the companion chip.

All I2C operations are accessed by 860x-i2c driver. In order to support both
I2C client address, the read/write API is changed in below.

reg_read(client, offset)
reg_write(client, offset, data)

The benefit is that client drivers only need one kind of read/write API. I2C
and MFD driver can be shared in both 8606 and 8607.

Since API is changed, update API in 8607 regulator driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Create 88pm8607-i2c driver to support all I2C operation of 88PM8607.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

This converts the AB3100 core MFD driver to use a threaded
interrupt handler instead of the explicit top/bottom-half
construction with a workqueue. This saves some code and make it
more similar to other modern MFD drivers.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The headphone detect and charger are using the IRQ numbers so need
to take account of irq_base with the genirq conversion. I obviously
picked the wrong system for initial testing.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The genirq implementation does not allow modules to implement irq_chips
so the conversion of WM8350 to genirq means we can no longer allow the
driver to be built as a module.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

This gives us use of the diagnostic facilities genirq provides and
will allow implementation of interrupt support for the WM8350 GPIOs.
Stub functions are provided to ease the transition of the individual
drivers, probably after additional work to pass the IRQ numbers via
the struct devices.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Unlike the wm8350-custom code genirq nests enable and disable calls
so we can't just unconditionally mask or unmask the interrupt,
we need to remember the state we set and only mask or unmask when
there is a real change.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

To better match genirq.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The structure t7l66xb should not be freed before the subsequent references
to its fields in the arguments to clk_put.  Furthermore, this structure is
allocated near the beginning of the function, and a goto to the label
err_noirq appears after a successful allocation, so it would seem that the
kfree should be moved down below this label.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,e;
identifier f;
iterator I;
statement S;
@@

*kfree(x);
... when != &x
    when != x = e
    when != I(x,...) S
*x->f
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>

Use resource_size() for ioremap.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Use resource_size() for ioremap.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The requested memory region is smaller than the actual ioremap().
Use resource_size() to get the correct size.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix cast warning in pcc driver.
  [CPUFREQ] Processor Clocking Control interface driver

The recent rework of /proc/bus/usb/devices polling support made
this structure unused so let's remove it.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit a069c266.

It turns ou that not only was it missing a case (XFS) that needed it,
but perhaps more importantly, people sometimes want to enable new
modules that they hadn't had enabled before, and if such a module uses
list_sort(), it can't easily be inserted any more.

So rather than add a "select LIST_SORT" to the XFS case, just leave it
compiled in.  It's not all _that_ big, after all, and the inconvenience
isn't worth it.
Requested-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Don Mullis <don.mullis@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This adds separate I/O and memory specs, so we don't have to change the
field width in a shared spec, which then lets us make all the specs const
and static, since they never change.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add clues about what the SMALL and SPECIAL flags do.
Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Reducing the size of struct printf_spec is a good thing because multiple
instances are commonly passed on stack.

It's possible for type to be u8 and field_width to be s8, but this is
likely small enough for now.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The caller of usbfs_conn_disc_event() in some cases (but not always)
already holds usbfs_mutex, so trying to protect the event counter with
that lock causes nasty deadlocks.

The problem was introduced by commit 554f7696 ("USB: Remove BKL from
poll()") when the BLK protection was turned into using the mutex instead.

So fix this by using an atomic variable instead.  And while we're at it,
get rid of the atrocious naming of said variable and the waitqueue it is
associated with.

This also cleans up the unnecessary locking in the poll routine, since
the whole point of how the pollwait table works is that you can just add
yourself to the waiting list, and then check the condition you're
waiting for afterwards - avoiding all races.

It also gets rid of the unnecessary dynamic allocation of the device
status that just contained a single word.  We should use f_version for
this, as Dmitry Torokhov points out.  That simplifies everything
further.
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs:
  [LogFS] Change magic number
  [LogFS] Remove h_version field
  [LogFS] Check feature flags
  [LogFS] Only write journal if dirty
  [LogFS] Fix bdev erases
  [LogFS] Silence gcc
  [LogFS] Prevent 64bit divisions in hash_index
  [LogFS] Plug memory leak on error paths
  [LogFS] Add MAINTAINERS entry
  [LogFS] add new flash file system

Fixed up trivial conflict in lib/Kconfig, and a semantic conflict in
fs/logfs/inode.c introduced by write_inode() being changed to use
writeback_control' by commit a9185b41
("pass writeback_control to ->write_inode")

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm raid1: fix deadlock when suspending failed device
  dm: eliminate some holes data structures
  dm ioctl: introduce flag indicating uevent was generated
  dm: free dm_io before bio_endio not after
  dm table: remove unused dm_get_device range parameters
  dm ioctl: only issue uevent on resume if state changed
  dm raid1: always return error if all legs fail
  dm mpath: refactor pg_init
  dm mpath: wait for pg_init completion when suspending
  dm mpath: hold io until all pg_inits completed
  dm mpath: avoid storing private suspended state
  dm: document when snapshot has finished merging
  dm table: remove dm_get from dm_table_get_md
  dm mpath: skip activate_path for failed paths
  dm mpath: pass struct pgpath to pg init done

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits)
  hwmon: Remove the deprecated adt7473 driver
  hwmon: Fix off-by-one kind values
  hwmon: (tmp421) Fix temperature conversions
  hwmon: (tmp421) Restore missing inputs
  hwmon: Driver for Andigilog aSC7621 family monitoring chips
  hwmon: (adt7411) Improve locking
  hwmon: Add driver for ADT7411 voltage and temperature sensor
  hwmon: (w83793) Add watchdog functionality
  hwmon: (g760a) Make rpm_from_cnt static
  hwmon: (it87) Validate auto pwm settings
  hwmon: (it87) Add support for old automatic fan speed control
  hwmon: (it87) Drop dead web links in documentation
  hwmon: (it87) Add an entry in MAINTAINERS
  hwmon: (it87) Use strict_strtol instead of simple_strtol
  hwmon: (it87) Fix many checkpatch errors and warnings
  hwmon: (it87) Add support for beep on alarm
  hwmon: (it87) Create vid attributes by group
  hwmon: (it87) Refactor attributes creation and removal
  hwmon: (it87) Expose the PWM/temperature mappings
  hwmon: (it87) Display fan outputs in automatic mode as such
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (21 commits)
  xfs: return inode fork offset in bulkstat for fsr
  xfs: Increase the default size of the reserved blocks pool
  xfs: truncate delalloc extents when IO fails in writeback
  xfs: check for more work before sleeping in xfssyncd
  xfs: Fix a build warning in xfs_aops.c
  xfs: fix locking for inode cache radix tree tag updates
  xfs: remove xfs_ipin/xfs_iunpin
  xfs: cleanup xfs_iunpin_wait/xfs_iunpin_nowait
  xfs: kill xfs_lrw.h
  xfs: factor common xfs_trans_bjoin code
  xfs: stop passing opaque handles to xfs_log.c routines
  xfs: split xfs_bmap_btalloc
  xfs: fix xfs_fsblock_t tracing
  xfs: fix inode pincount check in fsync
  xfs: Non-blocking inode locking in IO completion
  xfs: implement optimized fdatasync
  xfs: remove wrapper for the fsync file operation
  xfs: remove wrappers for read/write file operations
  xfs: merge xfs_lrw.c into xfs_file.c
  xfs: fix dquota trace format
  ...

* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: (22 commits)
  nfsd4: fix minor memory leak
  svcrpc: treat uid's as unsigned
  nfsd: ensure sockets are closed on error
  Revert "sunrpc: move the close processing after do recvfrom method"
  Revert "sunrpc: fix peername failed on closed listener"
  sunrpc: remove unnecessary svc_xprt_put
  NFSD: NFSv4 callback client should use RPC_TASK_SOFTCONN
  xfs_export_operations.commit_metadata
  commit_metadata export operation replacing nfsd_sync_dir
  lockd: don't clear sm_monitored on nsm_reboot_lookup
  lockd: release reference to nsm_handle in nlm_host_rebooted
  nfsd: Use vfs_fsync_range() in nfsd_commit
  NFSD: Create PF_INET6 listener in write_ports
  SUNRPC: NFS kernel APIs shouldn't return ENOENT for "transport not found"
  SUNRPC: Bury "#ifdef IPV6" in svc_create_xprt()
  NFSD: Support AF_INET6 in svc_addsock() function
  SUNRPC: Use rpc_pton() in ip_map_parse()
  nfsd: 4.1 has an rfc number
  nfsd41: Create the recovery entry for the NFSv4.1 client
  nfsd: use vfs_fsync for non-directories
  ...

* git://git.infradead.org/ubi-2.6:
  UBI: add write checking
  UBI: simplify debugging return codes
  UBI: fix attaching error path
  UBI: support attaching by MTD character device name
  UBI: mark few variables as __initdata

Signed-off-by: Denis Turischev <denis@compulab.co.il>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The cs5535-gpio driver's get() function was returning the output value.
This means that the GPIO pins would never work as an input, even if
configured as an input.

The driver should return the READ_BACK value, which is the sensed line
value.  To make that work when the direction is 'output', INPUT_ENABLE
needs to be set.

In addition, the driver was not disabling OUTPUT_ENABLE when the direction
is set to 'input'.  That would cause the GPIO to continue to drive the pin
if the direction was ever set to output.

This issue was noticed when attempting to use the gpiolib driver to read
an external input.  I had previously been using the char/cs5535-gpio
driver.
Signed-off-by: Ben Gardner <gardner.ben@gmail.com>
Acked-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: <stable@kernel.org>		[2.6.33.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>