* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 5965/1: Fix soft lockup in at91 udc driver
  ARM: 6006/1: ARM: Use the correct NOP size in memmove for Thumb-2 kernel builds
  ARM: 6005/1: arm: kprobes: fix register corruption with jprobes
  ARM: 6003/1: removing compilation warning from pl061.h
  ARM: 6001/1: removing compilation warning comming from clkdev.h
  ARM: 6000/1: removing compilation warning comming from <asm/irq.h>
  ARM: 5999/1: Including device.h and resource.h header files in linux/amba/bus.h
  ARM: 5997/1: ARM: Correct the VFPv3 detection
  ARM: 5996/1: ARM: Change the mandatory barriers implementation (4/4)
  ARM: 5995/1: ARM: Add L2x0 outer_sync() support (3/4)
  ARM: 5994/1: ARM: Add outer_cache_fns.sync function pointer (2/4)
  ARM: 5993/1: ARM: Move the outer_cache definitions into a separate file (1/4)

* 'merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/5200: in lpbfifo, flag DMA irqs as enabled after requesting them
  powerpc/fsl: add device tree binding for QE firmware
  of/flattree: Fix unhandled OF_DT_NOP tag when unflattening the device tree

Merge branch 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing

* 'reiserfs/kill-bkl' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing:
  reiserfs: Fix locking BUG during mount failure

The missing initialization of the nb_cntl.strap_msi_enable does not
seem to be the only problem that prevents MSI, so that quirk is not
sufficient to enable MSI on all machines.  To be safe, disable MSI
unconditionally for the internal graphics and HDMI audio on these
chipsets.

[rjw: Added the PCI_VENDOR_ID_AI quirk.]
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'kgdb-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: Turn off tracing while in the debugger
  kgdb: use atomic_inc and atomic_dec instead of atomic_set
  kgdb: eliminate kgdb_wait(), all cpus enter the same way
  kgdbts,sh: Add in breakpoint pc offset for superh
  kgdb: have ebin2mem call probe_kernel_write once

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  Freezer: Fix buggy resume test for tasks frozen with cgroup freezer
  Freezer: Only show the state of tasks refusing to freeze

release_one_tty(tty) can be called when tty still has a reference
to pgrp/session. In this case we leak the pid.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The kernel debugger should turn off kernel tracing any time the
debugger is active and restore it on resume.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>

Memory barriers should be used for the kgdb cpu synchronization.  The
atomic_set() does not imply a memory barrier.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

This is a kgdb architectural change to have all the cpus (master or
slave) enter the same function.

A cpu that hits an exception (wants to be the master cpu) will call
kgdb_handle_exception() from the trap handler and then invoke a
kgdb_roundup_cpu() to synchronize the other cpus and bring them into
the kgdb_handle_exception() as well.

A slave cpu will enter kgdb_handle_exception() from the
kgdb_nmicallback() and set the exception state to note that the
processor is a slave.

Previously the salve cpu would have called kgdb_wait().  This change
allows the debug core to change cpus without resuming the system in
order to inspect arch specific cpu information.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The kgdb test suite mimics the behavior of gdb.  For the sh
architecture the pc must be decremented by 2 for software breakpoint.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>

Rather than call probe_kernel_write() one byte at a time, process the
whole buffer locally and pass the entire result in one go.  This way,
architectures that need to do special handling based on the length can
do so, or we only end up calling memcpy() once.

[sonic.zhang@analog.com: Reported original problem and preliminary patch]
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: Add NOGET quirk for Quanta Pixart touchscreen
  HID: fix oops in gyration_event()

* 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Fix up the SH-3 build for recent TLB changes.
  sh: export return_address() symbol.
  sh: Enable the mmu in start_secondary()
  sh: Fix FDPIC binary loader
  arch/sh/kernel: Use set_cpus_allowed_ptr
  sh: Update ecovec_defconfig
  USB gadget r8a66597-udc.c: duplicated include
  sh: update the TLB replacement counter for entry wiring.

While the MMUCR.URB and ITLB/UTLB differentiation works fine for all SH-4
and later TLBs, these features are absent on SH-3. This splits out
local_flush_tlb_all() in to SH-4 and PTEAEX copies while restoring the
old SH-3 one, subsequently fixing up the build.

This will probably want some further reordering and tidying in the
future, but that's out of scope at present.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This is needed with some of the tracing code built as modules, so provide
the export.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (76 commits)
  drm/radeon/kms: enable ACPI powermanagement mode on radeon gpus.
  drm/radeon/kms: rs400/480 should set common registers.
  drm/radeon/kms: add sanity check to wptr.
  drm/radeon/kms/evergreen: get DP working
  drm/radeon/kms: add hw_i2c module option
  drm/radeon/kms: use new pre/post_xfer i2c bit algo hooks
  drm/radeon/kms: disable MSI on IGP chips
  drm/radeon/kms: display watermark updates (v2)
  drm/radeon/kms/dp: disable training pattern on the sink at the end of link training
  drm/radeon/kms: minor fixes for eDP with LCD* device tags (v2)
  drm/radeon/kms/dp: remove extraneous training complete call
  drm/radeon/kms/atom: minor fixes to transmitter setup
  drm/radeon/kms: Only restrict BO to visible VRAM size when pinning to VRAM.
  drm: fix build error when SYSRQ is disabled
  drm/radeon/kms: fix macbookpro connector quirk
  drm/radeon/r6xx/r7xx: further safe reg clean up
  drm/radeon: bump the UMS driver version for r6xx/r7xx const buffer support
  drm/radeon/kms: bump the version for r6xx/r7xx const buffer support
  drm/radeon/r6xx/r7xx: CS parser fixes
  drm/radeon/kms: fix some typos in r6xx/r7xx hpd setup
  ...

Fix up MSI-related conflicts in drivers/gpu/drm/radeon/radeon_irq_kms.c

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (35 commits)
  microblaze: Support word copying in copy_tofrom_user
  microblaze: Print early printk information to log buffer
  microblaze: head.S typo fix
  microblaze: Use MICROBLAZE_TLB_SIZE in asm code
  microblaze: Kconfig Fix - pci
  microblaze: Adding likely macros
  microblaze: Add .type and .size to ASM functions
  microblaze: Fix TLB macros
  microblaze: Use instruction with delay slot
  microblaze: Remove additional resr and rear loading
  microblaze: Change register usage for ESR and EAR
  microblaze: Prepare work for optimization in exception code
  microblaze: Add DEBUG option
  microblaze: Support systems without lmb bram
  microblaze: uaccess: Sync strlen, strnlen, copy_to/from_user
  microblaze: uaccess: Unify __copy_tofrom_user
  microblaze: uaccess: Move functions to generic location
  microblaze: uaccess: Fix put_user for noMMU
  microblaze: uaccess: Fix get_user macro for noMMU
  microblaze: uaccess: fix clear_user for noMMU kernel
  ...

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  eeepc-wmi: new driver for WMI based hotkeys on Eee PC laptops
  asus-laptop: fix warning in asus_handle_init

proc_oom_score(task) has a reference to task_struct, but that is all.
If this task was already released before we take tasklist_lock

	- we can't use task->group_leader, it points to nowhere

	- it is not safe to call badness() even if this task is
	  ->group_leader, has_intersects_mems_allowed() assumes
	  it is safe to iterate over ->thread_group list.

	- even worse, badness() can hit ->signal == NULL

Add the pid_alive() check to ensure __unhash_process() was not called.

Also, use "task" instead of task->group_leader. badness() should return
the same result for any sub-thread. Currently this is not true, but
this should be changed anyway.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Word copying is used only for aligned addresses.
Here is space for improving to use any better copying technique.
Look at memcpy implementation.
Signed-off-by: Michal Simek <monstr@monstr.eu>

If early printk console is not enabled then all messages
are written to log buffer.
Signed-off-by: Michal Simek <monstr@monstr.eu>

I forget to change register name in comments.
Signed-off-by: Michal Simek <monstr@monstr.eu>

TLB size was hardcoded in asm code. This patch brings ability
to change TLB size only in one place. (mmu.h).
Signed-off-by: Michal Simek <monstr@monstr.eu>

I forget to remove pci Kconfig option.
Signed-off-by: Michal Simek <monstr@monstr.eu>

On the base on GCOV analytics is helpful to add likely/unlikely
macros.
Signed-off-by: Michal Simek <monstr@monstr.eu>

Cachegrind analysis need this fix to be able to log asm functions.
Signed-off-by: Michal Simek <monstr@monstr.eu>

To be able to do trace TLB operations.
Signed-off-by: Michal Simek <monstr@monstr.eu>

Sync labels.
Signed-off-by: Michal Simek <monstr@monstr.eu>

RESR and REAR uses the same regs in whole file.
Signed-off-by: Michal Simek <monstr@monstr.eu>

This change synchronize register usage in code.
ESR = R4
EAR = R3
Signed-off-by: Michal Simek <monstr@monstr.eu>

Any sync branch must follow mts instructions not mfs.
Signed-off-by: Michal Simek <monstr@monstr.eu>

Disable debug option in asm code.
Signed-off-by: Michal Simek <monstr@monstr.eu>

When the system has no lmb bram, main memory should be start from
zero because of microblaze vectors.

DTS fragment could look like:
	DDR2_SDRAM: memory@0 {
		device_type = "memory";
		reg = < 0x0 0x10000000 >;
	} ;

Then you have to setup CONFIG_KERNEL_BASE_ADDR=0 which caused
that kernel physical start address will be zero. On reset vector place
will be jump to 0x100 and on 0x100 starts kernel text.

You have to solve how to load the kernel before cpu starts.
Tested with XMD.
Signed-off-by: Michal Simek <monstr@monstr.eu>

Last sync.
Signed-off-by: Michal Simek <monstr@monstr.eu>

Move to generic location.
Signed-off-by: Michal Simek <monstr@monstr.eu>

noMMU and MMU use them.
Signed-off-by: Michal Simek <monstr@monstr.eu>

Here is small regression on dhrystone tests and I think
that on all benchmarking tests. It is due to better checking
mechanism in put_user macro
Signed-off-by: Michal Simek <monstr@monstr.eu>

Use unified version.
Signed-off-by: Michal Simek <monstr@monstr.eu>

Previous patches fixed only MMU version and this is the first
patch for noMMU kernel
Signed-off-by: Michal Simek <monstr@monstr.eu>