- Get i2c adapter with address 1 not 0 in davinci_i2c_expander_read
- Unlock mutex on error exit path in davinci_i2c_expander_op
Signed-off-by: Yusuf Caglar Akyuz <caglarakyuz@gmail.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

davinci_request_dma() was using -1 as an array index for dmaqnum[].
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Troy found that mmc_davinci_start_command was previously enabling
interrupts too early. This was allowing a TX interrupt to be handled
while the FIFO was being stuffed, resulting in an overstuffed fifo.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Make sure FIFO does not need to be serviced before handling other
interrupt sources.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Use rw_threshold where appropriate instead of assuming it is 32.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

This patch improves performance for filling the FIFO by rewriting in
assembly, and as a side-effect fixes odd-byte transfers.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Updated palm_bk3710 driver is now in mainline, remove old one.
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Update to latest kernel
Build more drivers as modules by default
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Now that palm_bk3710 driver is upstream new platform_device
and Kconfig support is needed.
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Conflicts:

	arch/arm/Kconfig
	arch/arm/mach-davinci/clock.c
	drivers/ide/Kconfig
	drivers/ide/Makefile
	drivers/media/video/Makefile
	drivers/mtd/nand/Kconfig
	drivers/mtd/nand/Makefile
	drivers/video/Makefile
	include/linux/ide.h

Be kinder on the CPU when busy-waiting.
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Remove unused and redundant variables. The unused variables were
unused prior to this patchset. que_mmc_host is now just available
through the device struct.
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Move platform device gear into platform files.  Add some graceful
failure paths.
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Use our actual device for dev_dbg and friends, not some blank fake
struct.
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Move other statics and globals into device struct. Shrink some of the
flags into single-bit fields, and the more often used flags into
bools.
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Move mmcsd_base into device struct.
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Deprecate use of volatile registers structure.  Use I/O accessor
functions instead.  Demystify magic constants.

This is moved to use ioremap later in the patch series.
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Make davinci-mmc mostly scripts/checkpatch.pl compliant.
Signed-off-by: Bernard Blackham <bernard@largestprime.net>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Here is a quick fix to compile for the davinci_mmc driver in the
latest git kernel: they changed error codes to standard and use
sg_virt to get the scatterlist page.
Signed-off-by: Vitaly Makarov <vit.macarrow@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

If an interrupt happens before an I2c master read/write,
complete is called on uninitialized structure.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

If wait_for_completion_interruptible_timeout exits due
to a signal, the i2c bus was locking up.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

Interrupts are enabled at the point where
the DAVINCI_I2C_IVR_REG is read, so unless
an interrupt happened just at that moment,
no interrupt would be pending. Even though
documentation implies you should do this,
I see no reason. If slave support is added,
this read would cause a hard to reproduce bug.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

When a dma channel is opened, clear all pending events.  Remove SAM &
DAM bits if source or destination isn't a fifo.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Kevin Hilman <khilman@mvista.com>

When building as a module, the board support code (which is compiled
in) cannot directly call the driver code (which may be in a module.)

This patch the separates the card-detect IRQ usage into board-specific
code and driver code, and adds a couple slot-specific items to the MMC
platform data.

Tested on 3430SDP ES2.
Signed-off-by: Kevin Hilman <khilman@mvista.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch fix the following build problem:

  CC      arch/arm/mach-omap2/pm.o
arch/arm/mach-omap2/pm.c: In function 'omap2_pm_init':
arch/arm/mach-omap2/pm.c:840: warning: passing argument 2 of 'sysfs_create_file' from incompatible pointer type
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

These changes is the result of the discussion with Paul Walmsley.
His ideas are included into this patch.

Remove DPLL output divider handling from DPLLs and CLKOUTX2 clocks,
and place it into specific DPLL output divider clocks (e.g., dpll3_m2_clk).
omap2_get_dpll_rate() now returns the correct DPLL rate, as represented
by the DPLL's CLKOUT output. Also add MPU and IVA2 subsystem clocks, along
with high-frequency bypass support.

Add support for DPLLs function in locked and bypass clock modes.
Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

There was a problem that kernel counldn't find struct device for
device MMU when unregistering it for class. This is because device
MMUs are the pseudo devices and they were not created when registering
into MMU class. This patch will create struct device when registering
device MMU into class and will fix the problem that "dspctl cleanup"
encountered kernel Oops.
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Refresh palmtt_defconfig
Signed-off-by: Francisco Alecrim <francisco.alecrim@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>

A missing include file. Thanks to Tony Lindgren for
pointing that out.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Clean up some clock framework copyrights
Signed-off-by: Tony Lindgren <tony@atomide.com>

Recent changes broke compilation for omap_udc.c.
Signed-off-by: Felipe Balbi <me@felipebalbi.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Another compile fix for DSP code ... these symbols are defined
as NOPs in a header.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Function enable_lnk does incorrect channel link on non-omap1 builds if chain
is created manually with omap_request_dma and omap_dma_link_lch functions.

Fix this by making sure that next_linked_ch field is initialized to -1 just
in omap_request_dma.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This code is runs only on 24xx.
Signed-off-by: Tony Lindgren <tony@atomide.com>

More fixes for cm and prm assembly access
Signed-off-by: Tony Lindgren <tony@atomide.com>

If MMU fwk is not selected, compile fails otherwise.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge branches 'master' and 'linus'

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  [PARISC] make ptr_to_pide() static
  [PARISC] head.S: section mismatch fixes
  [PARISC] add back Crestone Peak cpu
  [PARISC] futex: special case cmpxchg NULL in kernel space
  [PARISC] clean up show_stack
  [PARISC] add pa8900 CPUs to hardware inventory
  [PARISC] clean up include/asm-parisc/elf.h
  [PARISC] move defconfig to arch/parisc/configs/
  [PARISC] add back AD1889 MAINTAINERS entry
  [PARISC] pdc_console: fix bizarre panic on boot
  [PARISC] dump_stack in show_regs
  [PARISC] pdc_stable: fix compile errors
  [PARISC] remove unused pdc_iodc_printf function
  [PARISC] bump __NR_syscalls
  [PARISC] unbreak pgalloc.h
  [PARISC] move VMALLOC_* definitions to fixmap.h
  [PARISC] wire up timerfd syscalls
  [PARISC] remove old timerfd syscall