This moves files for Beat hvcall interfaces into platforms/cell/.
All files in this patch are used by celleb-beat only.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This moves the SCC (Super Companion Chip) related code for celleb
into platforms/cell/.
All files in this patch are used by celleb-beat and celleb-native
commonly.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This moves the base code for celleb support into platforms/cell/.
All files in this patch are used by celleb-beat and celleb-native
commonly.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Now, we can use generic io-workarounds mechanism and the workaround
code for spider-pci. This changes Celleb PCI code to use spider-pci
code.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This splits cell io-workaround code into spider-pci dependent code and
a generic part, and also moves io-workarounds initialization into
cell_setup_phb.
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add a DEBUG config setting which turns on all (most) of the debugging
under platforms/pseries.

To have this take effect we need to remove all the #undef DEBUG's, in
various files. We leave the #undef DEBUG in platforms/pseries/lpar.c,
as this enables debugging printks from the low-level hash table routines,
and tends to make your system unusable. If you want those enabled you
still have to turn them on by hand.

Also some of the RAS code has a DEBUG block which causes a functional
change, so I've keyed this off a different (non-existant) debug #define.

This is only enabled if you have PPC_EARLY_DEBUG enabled also.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

In pseries/lpar.c, fix some printf specifier mismatches, and add
a newline to one printk.

In pseries/rtasd.c add "rtasd" to some messages to make it clear
where they're coming from.

In pseries/scanlog.c remove the hand-rolled runtime debugging support
in there. This file has been largely unchanged for eons, if we need to
debug it in future we can recompile.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

On pseries LPAR we can call the udbg routines, and the udbg console very
early. So mark the udbg console as safe to call early in boot, and register
the udbg console as soon as the udbg routines are hooked up.

This allows platforms/pseries code to use printk() and pr_debug() rather
than needing to call udbg_printf() directly for early debugging. This is
nice because a) it's standard, b) it goes via the printk buffer, and c)
you can get printk time stamps.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The udbg console should be safe to call basically at any time after boot.
It does not need any per-cpu resources or for the cpu to be online, as
long as there is a udbg_putc routine hooked up it should work. So mark it
as CON_ANYTIME.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Because the udbg_console has CON_ENABLED set, it's possible that when we
register it with the console code the index won't be set. This leads to
slightly confusing boot messages like:

[    0.000000] console [udbg-1] enabled

We could remove CON_ENABLED, but we don't want to do that, we always
want the udbg console to be activated, even if the user specified some
other console on the command line.

The simplest fix seems to be just to set the index to 0 by hand. There
is no issue with duplicate udbg consoles, as we guard against registering
multiple times in register_early_udbg_console().
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This adds the required functionality to fill in all pacas at runtime.

With NR_CPUS=1024
text    data     bss     dec     hex filename
 137 1704032       0 1704169  1a00e9 arch/powerpc/kernel/paca.o :Before
 121 1179744  524288 1704153  1a00d9 arch/powerpc/kernel/paca.o :After

Also remove unneeded #includes from arch/powerpc/kernel/paca.c
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Currently all iSeries secondary CPUs spin directly on the cpu_start
field in their paca.  Make them spin on the global
__secondary_hold_spinloop until after the pacas have been initialised.

As Stephen Rothwell points out, this works at the moment because
__secondary_hold_spinloop is being set already, but iSeries isn't
looking at it :)
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* Removed get_msr(), get_srr0(), and get_srr1() - not used anywhere
* Use STACK_FRAME_OVERHEAD instead of magic number
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Replace two open-coded occurences of the of_get_next_parent() logic.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

As BenH said the other day, it is an "accident" that prom_init.o is
linked with the rest of the kernel.  The truth is a little more
subtle, prom_init isn't truly bootloader, it does access kernel data
in a few places.

What we can do is discourage people from adding new code that accesses
data outside of prom_init.  And hence this patch; from the script:

 # This script checks prom_init.o to see what external symbols it
 # is using, if it finds symbols not in the whitelist it returns
 # an error. The point of this is to discourage people from
 # intentionally or accidentally adding new code to prom_init.c
 # which has side effects on other parts of the kernel.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Add Timur Tabi as the maintainer for the Freescale QE library, the
Freescale QE UART device driver, the Freescale SOC sound drivers, and
the Crystal Semiconductor CS4270 device driver.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

* Removed TI_EXECDOMAIN define as its not used anywhere
* Use STACK_INT_FRAME_SIZE to allow common define of INT_FRAME_SIZE
* Define TI_CPU on both ppc32 & ppc64 (removes an ifdef).
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Use (31-THREAD_SHIFT) to get to thread_info from stack pointer.  This makes
the code a bit easier to read and more robust if we ever change THREAD_SHIFT.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Remove the inclusion of asm-offsets.h from stacktrace.c.  It isn't
supposed to be included in C code and it causes problems with multiple
definitions of things.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The fixmap code from x86 allows us to have compile time virtual addresses
that we change the physical addresses of at run time.

This is useful for applications like kmap_atomic, PCI config that is done
via direct memory map, kexec/kdump.

We got ride of CONFIG_HIGHMEM_START as we can now determine a more optimal
location for PKMAP_BASE based on where the fixmap addresses start and
working back from there.

Additionally, the kmap code in asm-powerpc/highmem.h always had debug
enabled.  Moved to using CONFIG_DEBUG_HIGHMEM to determine if we should
have the extra debug checking.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch fixes the following build error:

<--  snip  -->

...
  CC [M]  drivers/char/xilinx_hwicap/xilinx_hwicap.o
...
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/char/xilinx_hwicap/xilinx_hwicap.c:806: error: hwicap_of_match causes a section type conflict
/home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/char/xilinx_hwicap/xilinx_hwicap.c:806: error: hwicap_of_match causes a section type conflict
make[4]: *** [drivers/char/xilinx_hwicap/xilinx_hwicap.o] Error 1

<--  snip  -->
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

After commit 585468e5
([POWERPC] i2c: Fix build breakage introduced by OF helpers)
drivers/of/of_i2c.c needs a MODULE_LICENSE.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Added support to allow an 85xx kernel to be run from a non-zero physical
address (useful for cooperative asymmetric multiprocessing situations and
kdump).  The support can be configured at compile time by setting
CONFIG_PAGE_OFFSET, CONFIG_KERNEL_START, and CONFIG_PHYSICAL_START as
desired.

Alternatively, the kernel build can set CONFIG_RELOCATABLE.  Setting this
config option causes the kernel to determine at runtime the physical
addresses of CONFIG_PAGE_OFFSET and CONFIG_KERNEL_START.  If
CONFIG_RELOCATABLE is set, then CONFIG_PHYSICAL_START has no meaning.
However, CONFIG_PHYSICAL_START will always be used to set the LOAD program
header physical address field in the resulting ELF image.

Currently we are limited to running at a physical address that is a
multiple of 256M.  This is due to how we map TLBs to cover
lowmem.  This should be fixed to allow 64M or maybe even 16M alignment
in the future.  It is considered an error to try and run a kernel at a
non-aligned physical address.

All the magic for this support is accomplished by proper initialization
of the kernel memory subsystem and use of ARCH_PFN_OFFSET.

The use of ARCH_PFN_OFFSET only affects normal memory and not IO mappings.
ioremap uses map_page and isn't affected by ARCH_PFN_OFFSET.

/dev/mem continues to allow access to any physical address in the system
regardless of how CONFIG_PHYSICAL_START is set.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Commit 0119536c added an assembly
version of strncmp to PowerPC.  However, it changed a common header
file between arch/ppc and arch/powerpc without adding strncmp to
arch/ppc.  This fixes that omission so that arch/ppc links again.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Commit d04ceb3f moved phys_addr_t
definitions to include/asm-powerpc/types.h.  However, arch/ppc 440
builds had a duplicate definition in include/asm-ppc/mmu.h that caused
the build to fail.

This removes the duplicate definition in arch/ppc.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The MPSC driver and prpmc2800.dts have been modified to use property
'cell-index' as the serial port number, but the early serial console
driver for the mv64x60 has not been modified to use this new property.
This fixes it.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

If one of the devices of the mv64x60 init fails, the remaining
devices are not initialized.

This changes the code to display an error and continue the
initialization.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Signed-off-by: Paul Mackerras <paulus@samba.org>

I2C parameters freq_m and freq_n are assigned defaults in the code,
but if properties for those parameters are not found in the open
firmware description the init routine returns an error and doesn't
create the platform device.

This changes the code so that it doesn't return an error if the
properties are not found but instead uses the default values.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Use the __weak macro instead of the longer __attribute__ ((weak)) form
in one place in init/main.c.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
--

 init/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>

The powerpc kernel stacks need to be naturally aligned, as they
contain the thread info at the bottom, which is obtained by
clearing the low bits of the stack pointer.

However, when using 64K pages, the stack is smaller than a page,
so we use kmalloc to allocate it, but that doesn't provide the
alignment guarantee we need.

It appeared to work so far... until one enables SLUB debugging
which then returns unaligned pointers.  Ooops...

This fixes it by using a slab cache with enforced alignment.  It
relies on my previous patch that adds a thread_info_cache_init()
callback.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Some architectures need to maintain a kmem cache for thread info
structures.  The next commit adds that to powerpc to fix an alignment
problem.

There is no good arch callback to use to initialize that cache
that I can find, so this adds a new one in the form of a weak
function whose default is empty.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The PS3 gelic network driver depends on the wake-on-lan support
provided by the PS3 sys manager driver.  Add that dependency
to the GELIC_NET Kconfig option.

Prevents these build errors:

  ps3_gelic_net.c:1277: undefined reference to `.ps3_sys_manager_get_wol'
  ps3_gelic_net.c:1337: undefined reference to `.ps3_sys_manager_set_wol'

CC: Masakazu Mokuno <mokuno@sm.sony.co.jp>
CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

os-area.c requires routines declared in linux/of.h, so should include it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

numa.c requires routines declared in linux/of.h, so should include it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Since 43cc71ee, the platform modalias
is prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable
"macintosh" platform drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This reverts commit e4cc5894, as
requested by Roland McGrath, because compat_ptrace_request (added in
commit e16b2781, "ptrace:
compat_ptrace_request siginfo") now handles this case.
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [patch 7/7] vfs: mountinfo: show dominating group id
  [patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfo
  [patch 5/7] vfs: mountinfo: allow using process root
  [patch 4/7] vfs: mountinfo: add mount peer group ID
  [patch 3/7] vfs: mountinfo: add mount ID
  [patch 2/7] vfs: mountinfo: add seq_file_root()
  [patch 1/7] vfs: mountinfo: add dentry_path()
  [PATCH] remove unused label in xattr.c (noise from ro-bind)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  iwlwifi: Fix built-in compilation of iwlcore
  net: Unexport move_addr_to_{kernel,user}
  rt2x00: Select LEDS_CLASS.
  iwlwifi: Select LEDS_CLASS.
  leds: Do not guard NEW_LEDS with HAS_IOMEM
  [IPSEC]: Fix catch-22 with algorithm IDs above 31
  time: Export set_normalized_timespec.
  tcp: Make use of before macro in tcp_input.c
  hamradio: Remove unneeded and deprecated cli()/sti() calls in dmascc.c
  [NETNS]: Remove empty ->init callback.
  [DCCP]: Convert do_gettimeofday() to getnstimeofday().
  [NETNS]: Don't initialize err variable twice.
  [NETNS]: The ip6_fib_timer can work with garbage on net namespace stop.
  [IPV4]: Convert do_gettimeofday() to getnstimeofday().
  [IPV4]: Make icmp_sk_init() static.
  [IPV6]: Make struct ip6_prohibit_entry_template static.
  tcp: Trivial fix to correct function name in a comment in net/ipv4/tcp.c
  [NET]: Expose netdevice dev_id through sysfs
  skbuff: fix missing kernel-doc notation
  [ROSE]: Fix soft lockup wrt. rose_node_list_lock