Commits · 59d81029b6804c3d5895d07cad77d7dfddc6b5b2 · linux / linux-davinci

26 May, 2009 23 commits

perf report: Fix kernel symbol resolution · 59d81029

Arnaldo Carvalho de Melo authored May 26, 2009

kallsyms have just the symbol start, so we need to read two lines
to get the len.

[ Impact: fix incorrect kernel symbol display in perf report ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

59d81029

perf report: Fix ELF symbol parsing · f17e04af

Peter Zijlstra authored May 26, 2009

[ Impact: fix DSO symbol output in perf report ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

f17e04af

perf top: fix typo in -d option · db20c003

Mike Galbraith authored May 26, 2009

Clean up copy/paste options parsing conversion error.

[ Impact: reactivate -d option ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

db20c003

perf top: Remove leftover NMI/IRQ bits · f91183fe

Mike Galbraith authored May 26, 2009

79202b removed IRQ/NMI mode selection, so remove it from
perf top as well.

[ Impact: cleanup ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

f91183fe

perf report: Add help/manpage · 0bec253c

Ingo Molnar authored May 26, 2009

Add a (minimal) manpage for perf report.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

0bec253c

perf record: Convert to Git option parsing · 53cb8bc2

Ingo Molnar authored May 26, 2009

Remove getopt usage and use Git's much more advanced and more compact
command option library.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

53cb8bc2

perf report: Fix segfault on unknown symbols · f3e08c53

Peter Zijlstra authored May 22, 2009

Ingo reported:

> Program received signal SIGSEGV, Segmentation fault.
> 0x0000003e25080f80 in strlen () from /lib64/libc.so.6
> Missing separate debuginfos, use: debuginfo-install elfutils.x86_64
> glibc.x86_64 zlib.x86_64
> (gdb) bt
> #0  0x0000003e25080f80 in strlen () from /lib64/libc.so.6
> #1  0x0000003e2506954e in fputs () from /lib64/libc.so.6
> #2  0x00000000004059e8 in cmd_report (argc=<value optimized out>,
>     argv=<value optimized out>) at builtin-report.c:521
> #3  0x0000000000402dad in handle_internal_command (argc=1, argv=0x7fffe1218e30)
>     at perf.c:226
> #4  0x0000000000402f6d in main (argc=1, argv=0x7fffe1218e30) at perf.c:324
> (gdb)

Signed-off-by Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

f3e08c53

perf_counter: Use rb_tree for symhists and threads in report · ce7e4365

Arnaldo Carvalho de Melo authored May 19, 2009

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

ce7e4365

perf_counter: Add our private copy of list.h · 040e6034

Arnaldo Carvalho de Melo authored May 18, 2009

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

040e6034

perf_counter: Use rb_trees in perf report · 35a50c8a

Arnaldo Carvalho de Melo authored May 18, 2009

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

35a50c8a

perf_counter: Implement dso__load using libelf · 62eb9390

Arnaldo Carvalho de Melo authored May 18, 2009

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

62eb9390

perf_counter tools: remove the standalone perf-report utility · fd4242bb

Ingo Molnar authored May 20, 2009

With a built-in 'perf report' command now available, remove the
standalone implementation for good.
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

fd4242bb

perf_counter: First part of 'perf report' conversion to C + elfutils · 8fa66bdc

Arnaldo Carvalho de Melo authored May 18, 2009

Integrate perf-report into 'perf', as builtin-report.c.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8fa66bdc

perf top: Convert to Git option parsing · b456bae0

Ingo Molnar authored May 26, 2009

Remove getopt usage and use Git's much more advanced and more compact
command option library.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

b456bae0

perf stat: Convert to Git option parsing · 5242519b

Ingo Molnar authored May 26, 2009

Remove getopt usage and use Git's much more advanced and more compact
command option library.

Extend the event parser library with the extensions that were in
perf-stat before.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

5242519b

perf_counter tools: Librarize event string parsing · 8ad8db37

Ingo Molnar authored May 26, 2009

Extract the event string parser from builtin-record.c, and
librarize it - to be reused in other commands.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8ad8db37

perf record: Convert to Git option parsing · 0e9b20b8

Ingo Molnar authored May 26, 2009

Remove getopt usage and use Git's much more advanced and more compact
command option library.

Git's library (util/parse-options.[ch]) constructs help texts and
error messages automatically, and has a number of other convenience
features as well.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

0e9b20b8

perf stat: Remove unused variable · 4e97ddf0

Ingo Molnar authored May 26, 2009

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

4e97ddf0

perf record: Straighten out argv types · 69aa48ab

Ingo Molnar authored May 26, 2009

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

69aa48ab

perf_counter: Initialize ->oncpu properly · 329d876d

Ingo Molnar authored May 26, 2009

This shouldnt matter normally (and i have not seen any
misbehavior), because active counters always have a
proper ->oncpu value - but nevertheless initialize the
field properly to -1.

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

329d876d

perf_counter, x86: Make NMI lockups more robust · aaba9801

Ingo Molnar authored May 26, 2009

We have a debug check that detects stuck NMIs and returns with
the PMU disabled in the global ctrl MSR - but i managed to trigger
a situation where this was not enough to deassert the NMI.

So clear/reset the full PMU and keep the disable count balanced when
exiting from here. This way the box produces a debug warning but
stays up and is more debuggable.

[ Impact: in case of PMU related bugs, recover more gracefully ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

aaba9801

perf_counter, x86: Fix APIC NMI programming · 79202ba9

Ingo Molnar authored May 26, 2009

My Nehalem box locks up in certain situations (with an
always-asserted NMI causing a lockup) if the PMU LVT
entry is programmed between NMI and IRQ mode with a
high frequency.

Standardize exlusively on NMIs instead.

[ Impact: fix lockup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

79202ba9

perf_counter: powerpc: Implement interrupt throttling · 8a7b8cb9

Paul Mackerras authored May 26, 2009

This implements interrupt throttling on powerpc.  Since we don't have
individual count enable/disable or interrupt enable/disable controls
per counter, this simply sets the hardware counter to 0, meaning that
it will not interrupt again until it has counted 2^31 counts, which
will take at least 2^30 cycles assuming a maximum of 2 counts per
cycle.  Also, we set counter->hw.period_left to the maximum possible
value (2^63 - 1), so we won't report overflows for this counter for
the forseeable future.

The unthrottle operation restores counter->hw.period_left and the
hardware counter so that we will once again report a counter overflow
after counter->hw.irq_period counts.

[ Impact: new perfcounters robustness feature on PowerPC ]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <18971.35823.643362.446774@cargo.ozlabs.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8a7b8cb9

25 May, 2009 14 commits

perf_counter: fix warning & lockup · 0127c3ea

Ingo Molnar authored May 25, 2009

 - remove bogus warning
 - fix wakeup from NMI path lockup
 - also fix up whitespace noise in perf_counter.h

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525153931.703093461@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

0127c3ea

Revert "perf_counter, x86: speed up the scheduling fast-path" · 53b441a5

Ingo Molnar authored May 25, 2009

This reverts commit b68f1d2e.

It is causing problems (stuck/stuttering profiling) - when mixed
NMI and non-NMI counters are used.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525153931.703093461@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

53b441a5

perf_counter: Generic per counter interrupt throttle · a78ac325

Peter Zijlstra authored May 25, 2009

Introduce a generic per counter interrupt throttle.

This uses the perf_counter_overflow() quick disable to throttle a specific
counter when its going too fast when a pmu->unthrottle() method is provided
which can undo the quick disable.

Power needs to implement both the quick disable and the unthrottle method.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525153931.703093461@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

a78ac325

perf_counter: x86: Remove interrupt throttle · 48e22d56

Peter Zijlstra authored May 25, 2009

remove the x86 specific interrupt throttle
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525153931.616671838@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

48e22d56

perf_counter: x86: Expose INV and EDGE bits · ff99be57

Peter Zijlstra authored May 25, 2009

Expose the INV and EDGE bits of the PMU to raw configs.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525153931.494709027@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

ff99be57

perf_counter: Fix PERF_COUNTER_CONTEXT_SWITCHES for cpu counters · 10989fb2

Peter Zijlstra authored May 25, 2009

Ingo noticed that cpu counters had 0 context switches, even though
there was plenty scheduling on the cpu.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525124600.419025548@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10989fb2

perf_counter: Propagate inheritance failures down the fork() path · 6ab423e0

Peter Zijlstra authored May 25, 2009

Fail fork() when we fail inheritance for some reason (-ENOMEM most likely).
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525124600.324656474@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

6ab423e0

perf_counter: Make pctrl() affect inherited counters too · 771d7cde

Peter Zijlstra authored May 25, 2009

Paul noted that the new ptcrl() didn't work on child counters.
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525124600.203151469@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

771d7cde

perf_counter: Remove unused ABI bits · e527ea31

Peter Zijlstra authored May 25, 2009

extra_config_len isn't used for anything, remove it.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525124600.116035832@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

e527ea31

perf_counter: Fix perf-$cmd invokation · 266dfb0b

Peter Zijlstra authored May 25, 2009

Fix:

  $ perf-top
  fatal: cannot handle -top internally
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090525124559.995591577@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

266dfb0b

perf stat: flip around ':k' and ':u' flags · d3f4b385

Ingo Molnar authored May 25, 2009

This output:

 $ perf stat -e 0:1:k -e 0:1:u ./hello
  Performance counter stats for './hello':
          140131  instructions         (events)
         1906968  instructions         (events)

Is quite confusing - as :k means "user instructions", :u means
"kernel instructions".

Flip them around - as the 'exclude' property is not intuitive in
the flag naming.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

d3f4b385

perf_counter: Move child perfcounter init to after scheduler init · e4cbb4e3

Ingo Molnar authored May 19, 2009

Initialize a task's perfcounters (inherit from parent, etc.) after
the child task's scheduler fields have been initialized already.

[ Impact: cleanup ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

e4cbb4e3

perf top: Reduce display overhead · d94b9430

Mike Galbraith authored May 25, 2009

Iterate over the symbol table once per display interval, and
copy/sort/tally/decay only those symbols which are active.

Before:

top - 10:14:53 up 4:08, 17 users, load average: 1.17, 1.53, 1.49
Tasks: 273 total, 5 running, 268 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.9%us, 38.2%sy, 0.0%ni, 19.9%id, 0.0%wa, 0.0%hi, 35.0%si, 0.0%st

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28504 root 20 0 1044 260 164 S 58 0.0 0:04.19 2 netserver
28499 root 20 0 1040 412 316 R 51 0.0 0:04.15 0 netperf
28500 root 20 0 1040 408 316 R 50 0.0 0:04.14 1 netperf
28503 root 20 0 1044 260 164 S 50 0.0 0:04.01 1 netserver
28501 root 20 0 1044 260 164 S 49 0.0 0:03.99 0 netserver
28502 root 20 0 1040 412 316 S 43 0.0 0:03.96 2 netperf
28468 root 20 0 1892m 325m 972 S 16 10.8 0:10.50 3 perf
28467 root 20 0 1892m 325m 972 R 2 10.8 0:00.72 3 perf

After:

top - 10:16:30 up 4:10, 17 users, load average: 2.27, 1.88, 1.62
Tasks: 273 total, 6 running, 267 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.5%us, 39.7%sy, 0.0%ni, 24.6%id, 0.0%wa, 0.0%hi, 33.3%si, 0.0%st

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ P COMMAND
28590 root 20 0 1040 412 316 S 54 0.0 0:07.85 2 netperf
28589 root 20 0 1044 260 164 R 54 0.0 0:07.84 0 netserver
28588 root 20 0 1040 412 316 R 50 0.0 0:07.89 1 netperf
28591 root 20 0 1044 256 164 S 50 0.0 0:07.82 1 netserver
28587 root 20 0 1040 408 316 R 47 0.0 0:07.61 0 netperf
28592 root 20 0 1044 260 164 R 47 0.0 0:07.85 2 netserver
28378 root 20 0 8732 1300 860 R 2 0.0 0:01.81 3 top
28577 root 20 0 1892m 165m 972 R 2 5.5 0:00.48 3 perf
28578 root 20 0 1892m 165m 972 S 2 5.5 0:00.04 3 perf

[ Impact: optimization ]
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

d94b9430

perf_counter tools: increase limits, fix · 85a9f920

Ingo Molnar authored May 25, 2009

NR_CPUS and NR_COUNTERS goes up quadratic ... 1024x4096 was far
too ambitious upper limit - go for 256x256 which is still plenty.

[ Impact: reduce perf tool memory consumption ]

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

85a9f920

24 May, 2009 3 commits

perf_counter: Increase mmap limit · a3862d3f

Ingo Molnar authored May 24, 2009

In a default 'perf top' run the tool will create a counter for
each online CPU. With enough CPUs this will eventually exhaust
the default limit.

So scale it up with the number of online CPUs.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

a3862d3f

perf top: fix segfault · c2990a2a

Mike Galbraith authored May 24, 2009

c6eb13 increased stack usage such that perf-top now croaks on startup.

Take event_array and mmap_array off the stack to prevent segfault on boxen
with smallish ulimit -s setting.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

c2990a2a

perf_counter: Remove perf_counter_context::nr_enabled · 475c5579

Peter Zijlstra authored May 23, 2009

now that pctrl() no longer disables other people's counters,
remove the PMU cache code that deals with that.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
LKML-Reference: <20090523163013.032998331@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

475c5579