- 17 Apr, 2009 24 commits
-
-
David Vrabel authored
Fix an oops in wusbhc_giveback_urb() if the wusb device had disconnected while an urb was in progress. Also release the ref count obtained here. Signed-off-by:
David Vrabel <david.vrabel@csr.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
David Vrabel authored
Make sure all WUSB devices are disconnected when stopping a WUSB HCD so that we don't leak the devices' wusb_dev structures. Signed-off-by:
-
David Vrabel authored
Check the return value of usb_hcd_link_urb_to_ep() and do not add the urb to the ASL/PZL if it returns an error. Omitting the check results in urbs that appear to be submitted successfully but then cannot be unliked (because usb_hcd_check_unlink_urb() returns an error). This can cause khubd (for example) to block forever in usb_kill_urb(). Signed-off-by:
-
David Vrabel authored
Provide a endpoint_reset method to reset sequence number and current window. This QHead information can only be changed while the qset is not in a schedule. Signed-off-by:
-
David Vrabel authored
Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by:
-
Dr. Greg Wettstein authored
The v950 appears to be a ruggedized version of the Motorola Razor phone. Tethering to the phone to use it in 'phone as modem' mode requires the use of the specialized moto-modem driver which layers over the usb-serial driver. Support for the v950 was added simply adding the device ID's for the phone. Signed-off-by:
Dr. Greg Wettstein <greg@enjellic.com> Signed-off-by:
-
Alan Stern authored
This patch (as1228) fixes a Makefile error introduced when the subdrivers in usb-storage were split out into separate modules. The intention is that when CONFIG_USB_LIBUSUAL is set, libusual.o and usual-tables.o should be combined into a single object file (called usb-libusual). The current Makefile will instead create two separate objects, and the result won't load properly. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Alan Jenkins <sourcejedi.lkml@googlemail.com> Reported-and-tested-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Werner Cornelius authored
commit 664d5df9 upstream. Fixup of Werner Cornelius patch to the ch341 USB-serial driver, which adds: - support all baudrates, not just a hard-coded set - support for controlling DTR, RTS and CTS Features still missing: - character length other than 8 bits - parity settings - break control I adapted his patch for the new usb_serial API introduced in 2.6.25-git8 by Alan Cox on 22 July 2008. Non-compliance to the new API was a reason for refusing a similar patch from Tollef Fog Heen. Usage example by Tollef Fog Heen : TEMPer USB thermometer <http://err.no/src/TEMPer.c> based on a patch by: From: Tollef Fog Heen <tfheen@err.no> * Implement support for all baud rates rather than just a hard coded set. * Make it possible to control status and control lines * Grab a bunch of #defines from FreeBSD to reduce the number of magic numbers in the file Signed-off-by:
Werner Cornelius <Werner.Cornelius@cornelius-consult.de> Signed-off-by:
Boris Hajduk <boris@hajduk.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Tollef Fog Heen <tfheen@err.no> Signed-off-by:
-
Greg Kroah-Hartman authored
Reverts commit 664d5df9 as the commit log information was not complete, and we didn't have a proper signed-off-by by the author of the original BSD code. Cc: Werner Cornelius <Werner.Cornelius@cornelius-consult.de> Cc: Boris Hajduk <boris@hajduk.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Kim Kyuwon authored
During driver resume processing, musb could cause a kernel panic. Fix by enabling the clock earlier, with the resume_early method. Signed-off-by:
Kim Kyuwon <q1.kim@samsung.com> Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Sergei Shtylyov authored
Multi-frame isochronous TX URBs transfers in DMA mode never complete with CPPI DMA because musb_host_tx() doesn't restart DMA on the second frame, only emitting a debug message. With Inventra DMA they complete, but in PIO mode. To fix: - Factor out programming of the DMA transfer from musb_ep_program() into musb_tx_dma_program(); - Reorder the code at the end of musb_host_tx() to facilitate the fallback to PIO iff DMA fails; - Handle the buffer offset consistently for both PIO and DMA modes; - Add an argument to musb_ep_program() for the same reason (it only worked correctly with non-zero offset of the first frame in PIO mode); - Set the completed isochronous frame descriptor's 'actual_length' and 'status' fields correctly in DMA mode. Also, since CPPI reportedly doesn't like sending isochronous packets in the RNDIS mode, change the criterion for this mode to be used only for multi-packet transfers. (There's no need for that mode in the single-packet case anyway.) [ dbrownell@users.sourceforge.net: split comment paragraph into bullet list, shrink patch delta, style tweaks ] Signed-off-by:
Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Sergei Shtylyov authored
The MUSB code clears TXCSR_DMAMODE incorrectly in several places, either asserting that TXCSR_DMAENAB is clear (when sometimes it isn't) or clearing both bits together. Recent versions of the programmer's guide require DMAENAB to be cleared first, although some older ones didn't. Fix this and while at it: - In musb_gadget::txstate(), stop clearing the AUTOSET and DMAMODE bits for the CPPI case since they never get set anyway (the former bit is reserved on DaVinci); but do clear the DMAENAB bit on the DMA error path. - In musb_host::musb_ep_program(), remove the duplicate DMA controller specific code code clearing the TXCSR previous state, add the code to clear TXCSR DMA bits on the Inventra DMA error path, to replace such code (executed late) on the PIO path. - In musbhsdma::dma_channel_abort()/dma_controller_irq(), add/use the 'offset' variable to avoid MUSB_EP_OFFSET() invocations on every RXCSR/TXCSR access. [dbrownell@users.sourceforge.net: don't introduce CamelCase, shrink diff] Signed-off-by:
-
Sergei Shtylyov authored
We really want to use DMA mode 1 for all multi-packet transfers; that's one IRQ on DMA completion, instead of one per packet. There is an important issue with such transfers, especially on the host side: when such transfers end with a full-size packet, we must defer musb_dma_completion() calls until the FIFO empties. Else we report URB completions too soon, and may clobber data in the FIFO fifo when writing the next packet (losing data). The Inventra DMA support uses DMA mode 1, but it ignores that issue. The CPPI DMA support uses mode 0, but doesn't handle its TXPKTRDY interrupts quite right either; it can get stale "packet ready" interrupts, and report transfer completion too early using slightly different code paths, also losing data. So I'm solving it in a generic way -- by adding a sort of the "interrupt filter" into musb_host_tx(), catching these cases where a DMA completion IRQ doesn't suffice and removing some needlessly controller-specific logic. When a TXDMA interrupt happens and DMA request mode 1 is active, that filter resets to mode 0 and defers URB completion processing until TXPKTRDY, unless the FIFO is already empty. Related filtering logic in Inventra and CPPI code gets removed. Since it should be competely safe now to use the DMA request mode 1 for host side transfers with the CPPI DMA controller, set it in musb_h_tx_dma_start() ... now renamed (and shared). [ dbrownell@users.sourceforge.net: don't introduce more CamElCase; use more concise explanations ] Signed-off-by:
-
David Brownell authored
The MUSB host side can't share generic TX FIFO flush logic with EP0; the EP0 TX status register bits are different from those for other entpoints. Resolve this issue by providing a new EP0-specific routine to flush and reset the FIFO, which pays careful attention to restrictions listed in the latest programmer's guide. This gets rid of an open issue whereby the usbtest control write test (#14) failed. Signed-off-by:
-
Alan Stern authored
This patch (as1227) adds the MAX_SECTORS_64 flag to the unusual_devs entry for the Simple Tech/Datafab controller. This fixes Bugzilla #12882. Signed-off-by:
binbin <binbinsh@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
David Brownell authored
Someone noted that the enqueue path used an unlocked access for usb_host_endpoint->hcpriv ... fix that, by being safe and always accessing it under spinlock protection. Signed-off-by:
-
Oliver Neukum authored
cdc-wdm needs to ignore extremely malformed descriptors. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Matthew Garrett authored
Add a set of device IDs from the Windows drivers. These aren't complete (there's a couple of cases where a QDL device is identified without the associated modem being identified), but it's better than the current situation. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Signed-off-by:
-
Pascal Terjan authored
This patch allows D-Link DWM-652 3.5G modem to work. It is an express card but was only tested with the provided usb adapter as I don't have machines with express card connector. /dev/ttyUSB{0,1,2} get created, and using comgt on ttyUSB1 works fine : [root@plop tmp]# comgt -d /dev/ttyUSB1 -e Enter PIN number: XXXX Waiting for Registration..(120 sec max). Registered on Home network: "Orange France",2 Signal Quality: 15,99 From: Pascal Terjan <pterjan@mandriva.com> Signed-off-by:
-
Peter Korsgaard authored
Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Cc: stable <stable@kernel.org> Signed-off-by:
-
Jonathan McDowell authored
The g_ether USB gadget driver currently decides whether or not there's a link to report back for eth_get_link based on if the USB link speed is set. The USB gadget speed is however often set even before the device is enumerated. It seems more sensible to only report a "link" if we're actually connected to a host that wants to talk to us. The patch below does this for me - tested with the PXA27x UDC driver. Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
-
Linus Torvalds authored
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Fix branch tracer header tracing: Fix power tracer header
-
Linus Torvalds authored
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Avoid printing sched_group::__cpu_power for default case tracing, sched: mark get_parent_ip() notrace
-
Linus Torvalds authored
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kernel/softirq.c: fix sparse warning rcu: Make hierarchical RCU less IPI-happy
-
- 16 Apr, 2009 16 commits
-
-
H Hartley Sweeten authored
Fix sparse warning in kernel/softirq.c. warning: do-while statement is not a compound statement Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> LKML-Reference: <BD79186B4FD85F4B8E60E381CAEE1909015F9033@mi8nycmail19.Mi8.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds authored
* 'x86/uv' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: UV BAU distribution and payload MMRs x86: UV: BAU partition-relative distribution map x86, uv: add Kconfig dependency on NUMA for UV systems x86: prevent /sys/firmware/sgi_uv from being created on non-uv systems x86, UV: Fix for nodes with memory and no cpus x86, UV: system table in bios accessed after unmap x86: UV BAU messaging timeouts x86: UV BAU and nodes with no memory
-
Gautham R Shenoy authored
Commit 46e0bb9c ("sched: Print sched_group::__cpu_power in sched_domain_debug") produces a messy dmesg output while attempting to print the sched_group::__cpu_power for each group in the sched_domain hierarchy. Fix this by avoid printing the __cpu_power for default cases. (i.e, __cpu_power == SCHED_LOAD_SCALE). [ Impact: reduce syslog clutter ] Reported-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Gautham R Shenoy <ego@in.ibm.com> Fixed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata: Report 16/32bit PIO as best we can libata: use ATA_ID_CFA_* pata_legacy: fix no device fail path pata_hpt37x: fix HPT370 DMA timeouts libata: handle SEMB signature better
-
Hugh Dickins authored
Tetsuo Handa reports seeing the WARN_ON(current->mm == NULL) in security_vm_enough_memory(), when do_execve() is touching the target mm's stack, to set up its args and environment. Yes, a UMH_NO_WAIT or UMH_WAIT_PROC call_usermodehelper() spawns an mm-less kernel thread to do the exec. And in any case, that vm_enough_memory check when growing stack ought to be done on the target mm, not on the execer's mm (though apart from the warning, it only makes a slight tweak to OVERCOMMIT_NEVER behaviour). Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
This reverts commit f520360d. Tetsuo Handa, running a kernel with CONFIG_DEBUG_PAGEALLOC=y and CONFIG_UEVENT_HELPER_PATH=/sbin/hotplug, has been hitting RCU detected CPU stalls: it's been spinning in the loop where do_execve() counts up the args (but why wasn't fixup_exception working? dunno). The recent change, switching kobject_uevent_env() from UMH_WAIT_EXEC to UMH_NO_WAIT, is broken: the exec uses args on the local stack here, and an env which is kfreed as soon as call_usermodehelper() returns. It very much needs to wait for the exec to be done. An alternative would be to keep the UMH_NO_WAIT, and complicate the code to allocate and free these resources correctly? but no, as GregKH pointed out when making the commit, CONFIG_UEVENT_HELPER_PATH="" is a much better optimization - though some distros are still saying /sbin/hotplug in their .config, yet with no such binary in their initrd or their root. Reported-by:
Arjan van de Ven <arjan@linux.intel.com> Acked-by:
Will Newton <will.newton@gmail.com> Signed-off-by:
-
Alan Cox authored
The legacy old IDE ioctl API for this is a bit primitive so we try and map stuff sensibly onto it. - Set PIO over DMA devices to report 32bit - Add ability to change the PIO32 settings if the controller permits it - Add that functionality into the sff drivers - Add that functionality into the VLB legacy driver - Turn on the 32bit PIO on the ninja32 and add support there Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
Sergei Shtylyov authored
Use ATA_ID_CFA_* constants for CFA specific identify data words 162 and 163. Signed-off-by:
-
Tejun Heo authored
When pata_legacy can't detect any device, it unregisters the platform_device and fails detection. However, it forgets to detach ata host triggering weird failures as the host later gets freed by devres while still attached. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Sergei Shtylyov authored
The libata driver has copied the code from the IDE driver which caused a post 2.4.18 regression on many HPT370[A] chips -- DMA stopped to work completely, only causing timeouts. Now remove hpt370_bmdma_start() for good... Signed-off-by:
-
Tejun Heo authored
WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by:
David Haun <drhaun88@gmail.com> Reported-by:
Lars Wirzenius <liw@liw.fi> Reported-by:
Juan Manuel <jmcarranza@gmail.com> Signed-off-by:
-
Cliff Wickman authored
This patch correctly sets BAU memory mapped registers to point to the sending activation descriptor table and target payload table. The "Broadcast Assist Unit" is used for TLB shootdown in UV. The memory mapped registers that point to sending and receiving memory structures contain node numbers. In one case the __pa() function did not provide the node id of memory on blade zero in configurations where that id is nonzero. In another case, it was assumed that memory was allocated on the local node. That assumption is not true in a configuration in which the node has no memory. Tested on the UV hardware simulator. [ Impact: fix possible runtime crash due to incorrect TLB logic ] Signed-off-by:
Cliff Wickman <cpw@sgi.com> LKML-Reference: <E1LuR5Z-0007An-B8@eag09.americas.sgi.com> Signed-off-by:
-
Chris Mason authored
block_write_full_page doesn't allow the caller to control what happens when the IO is over. This adds a new call named block_write_full_page_endio so the buffer head end_io handler can be provided by the caller. This will be used by the ext3 data=guarded mode to do i_size updates in a workqueue based end_io handler. end_buffer_async_write is also exported so it can be called to do the dirty work of managing page writeback for the higher level end_io handler. Signed-off-by:
Chris Mason <chris.mason@oracle.com> Acked-by:
Theodore Tso <tytso@mit.edu> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Chris Mason authored
This wasn't exported before and is useful (used by the experimental ext3 data=guarded code) Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (64 commits) phylib: Fix delay argument of schedule_delayed_work NET/ixgbe: Fix powering off during shutdown NET/e1000e: Fix powering off during shutdown NET/e1000: Fix powering off during shutdown packet: avoid warnings when high-order page allocation fails gianfar: stop send queue before resetting gianfar myr10ge: again fix lro_gen_skb() alignment declance: convert to net_device_ops bfin_mac: convert to net_device_ops au1000: convert to net_device_ops atarilance: convert to net_device_ops a2065: convert to net_device_ops ixgbe: update real_num_tx_queues on changing num_rx_queues ixgbe: fix tx queue index Revert "rose: zero length frame filtering in af_rose.c" sfc: Use correct macro to set event bitfield sfc: Match calls to netif_napi_add() and netif_napi_del() bonding: Remove debug printk e1000/e1000: fix compile warning ehea: Fix incomplete conversion to net_device_ops ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: remove some pointless conditionals before kfree() sbus: changed ioctls to unlocked sparc: asm/atomic.h on 32bit should include asm/system.h for xchg sparc64: Fix smp_callin() locking.
-
