- 22 Sep, 2009 9 commits
-
-
jie.yang@atheros.com authored
Set wol_ctrl_data to value 0, to remove compiling warning. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julia Lawall authored
The definitions of vnet_ops and ehea_netdev_ops have initializations of a local function and eth_change_mtu for their respective ndo_change_mtu fields. This change uses only the local function. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier I, s, fld; position p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @s@ identifier I, s, r.fld; position r.p0,p; expression E; @@ struct I s =@p0 { ... .fld@p = E, ...}; @script:python@ p0 << r.p0; fld << r.fld; ps << s.p; pr << r.p; @@ if int(ps[0].line)!=int(pr[0].line) or int(ps[0].column)!=int(pr[0].column): cocci.print_main(fld,p0) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Kevin Cernekee authored
kaweth_control() never frees the buffer that it allocates for the USB control message. Test case: while :; do ifconfig eth2 down ; ifconfig eth2 up ; done This is a tiny buffer so it is a slow leak. If you want to speed up the process, you can change the allocation size to e.g. 16384 bytes, and it will consume several megabytes within a few minutes. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Steve Glendinning authored
Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Jens Rosenboom noticed that a possibly unaligned const char* is cast to a const struct in6_addr *. Avoid this at the cost of a struct in6_addr copy on the stack. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Simek authored
You can't ping the board or connect to it unless you send any packet out from board. Tested-by: John Williams <john.williams@petalogix.com> Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
After successful firmware init, return instead of falling to error path (leading to detach) after resuming to D0 state. This was broken in recent firmware reset rehaul. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dhananjay Phadke authored
Fix minor bug in netdev tx timeout handling which could always lead to firmware reset instead of pci function reset. netxen_nic_reset_context() requires __NX_RESETTING bit cleared. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jaswinder Singh Rajput authored
'if (i < NR_INFO)' will only true if we breaks from 'for (i = 0; i < NR_INFO; i++)' So removing useless 'if (i < NR_INFO)' This also fixed following compilation warning : CC [M] drivers/net/pcmcia/pcnet_cs.o drivers/net/pcmcia/pcnet_cs.c: In function ‘get_hwinfo’: drivers/net/pcmcia/pcnet_cs.c:321: warning: ‘base’ may be used uninitialized in this function Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 21 Sep, 2009 8 commits
-
-
Alexander Duyck authored
This patch resolves a warning seen when doing namespace checking via "make namespacecheck" Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nelson, Shannon authored
Shorten ixgbe_configure_rx() and lessen indent depth. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nelson, Shannon authored
Allow the user to set Tx specific itr values. This only makes sense when there are separate vectors for Tx and Rx. When the queues are doubled up RxTx on the vectors, we still only use the rx itr value. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Don Skidmore authored
We weren't stoping the sfp_timer after the device was brought down. This patch properly cleans up. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Morton authored
sparc64 allnoconfig: arch/sparc/kernel/built-in.o(.text+0x134e0): In function `sys32_recvfrom': : undefined reference to `compat_sys_recvfrom' arch/sparc/kernel/built-in.o(.text+0x134e4): In function `sys32_recvfrom': : undefined reference to `compat_sys_recvfrom' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Haas authored
This patch adds support for one channel CAN/USB interace CPC-USB/ARM7 from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.com). Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sebastian Haas authored
This patch prepares replacing the staging driver cpc-usb with the new developed ems_usb CAN driver. Signed-off-by: Sebastian Haas <haas@ems-wuensche.com> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
With the removal of BUS_ID_SIZE, cpmac was not fully converted to use MII_BUS_ID_SIZE as it ought to. This patch fixes the following cpmac build failure: CC drivers/net/cpmac.o drivers/net/cpmac.c: In function 'cpmac_start_xmit': drivers/net/cpmac.c:563: warning: comparison of distinct pointer types lacks a cast drivers/net/cpmac.c: In function 'cpmac_probe': drivers/net/cpmac.c:1112: error: 'BUS_ID_SIZE' undeclared (first use in this function) drivers/net/cpmac.c:1112: error: (Each undeclared identifier is reported only once drivers/net/cpmac.c:1112: error: for each function it appears in.) Reported-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 17 Sep, 2009 18 commits
-
-
Sathya Perla authored
All cmds issued to BE after the creation of mccq must now use the mcc-q (and not mbox) to avoid a hw issue that results in mbox poll timeout. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jie Yang authored
use the wrong API when free dma. So when map dma use a flag to demostrate whether it is 'pci_map_single' or 'pci_map_page'. When free the dma, check the flags to select the right APIs('pci_unmap_single' or 'pci_unmap_page'). set the flags type to u16 instead of unsigned long on David's comments. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jarek Poplawski authored
Some classful qdiscs miss qstats.qlen updating with q.qlen of their child qdiscs in dump_stats methods. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jens Rosenboom authored
If an interface has multiple addresses, the current message for DAD failure isn't really helpful, so this patch adds the address itself to the printk. Signed-off-by: Jens Rosenboom <me@jayr.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hendrik Brueckner authored
iucv_sock_recvmsg() and iucv_process_message()/iucv_fragment_skb race for dequeuing an skb from the backlog queue. If iucv_sock_recvmsg() dequeues first, iucv_process_message() calls sock_queue_rcv_skb() with an skb that is NULL. This results in the following kernel panic: <1>Unable to handle kernel pointer dereference at virtual kernel address (null) <4>Oops: 0004 [#1] PREEMPT SMP DEBUG_PAGEALLOC <4>Modules linked in: af_iucv sunrpc qeth_l3 dm_multipath dm_mod vmur qeth ccwgroup <4>CPU: 0 Not tainted 2.6.30 #4 <4>Process client-iucv (pid: 4787, task: 0000000034e75940, ksp: 00000000353e3710) <4>Krnl PSW : 0704000180000000 000000000043ebca (sock_queue_rcv_skb+0x7a/0x138) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3 <4>Krnl GPRS: 0052900000000000 000003e0016e0fe8 0000000000000000 0000000000000000 <4> 000000000043eba8 0000000000000002 0000000000000001 00000000341aa7f0 <4> 0000000000000000 0000000000007800 0000000000000000 0000000000000000 <4> 00000000341aa7f0 0000000000594650 000000000043eba8 000000003fc2fb28 <4>Krnl Code: 000000000043ebbe: a7840006 brc 8,43ebca <4> 000000000043ebc2: 5930c23c c %r3,572(%r12) <4> 000000000043ebc6: a724004c brc 2,43ec5e <4> >000000000043ebca: e3c0b0100024 stg %r12,16(%r11) <4> 000000000043ebd0: a7190000 lghi %r1,0 <4> 000000000043ebd4: e310b0200024 stg %r1,32(%r11) <4> 000000000043ebda: c010ffffdce9 larl %r1,43a5ac <4> 000000000043ebe0: e310b0800024 stg %r1,128(%r11) <4>Call Trace: <4>([<000000000043eba8>] sock_queue_rcv_skb+0x58/0x138) <4> [<000003e0016bcf2a>] iucv_process_message+0x112/0x3cc [af_iucv] <4> [<000003e0016bd3d4>] iucv_callback_rx+0x1f0/0x274 [af_iucv] <4> [<000000000053a21a>] iucv_message_pending+0xa2/0x120 <4> [<000000000053b5a6>] iucv_tasklet_fn+0x176/0x1b8 <4> [<000000000014fa82>] tasklet_action+0xfe/0x1f4 <4> [<0000000000150a56>] __do_softirq+0x116/0x284 <4> [<0000000000111058>] do_softirq+0xe4/0xe8 <4> [<00000000001504ba>] irq_exit+0xba/0xd8 <4> [<000000000010e0b2>] do_extint+0x146/0x190 <4> [<00000000001184b6>] ext_no_vtime+0x1e/0x22 <4> [<00000000001fbf4e>] kfree+0x202/0x28c <4>([<00000000001fbf44>] kfree+0x1f8/0x28c) <4> [<000000000044205a>] __kfree_skb+0x32/0x124 <4> [<000003e0016bd8b2>] iucv_sock_recvmsg+0x236/0x41c [af_iucv] <4> [<0000000000437042>] sock_aio_read+0x136/0x160 <4> [<0000000000205e50>] do_sync_read+0xe4/0x13c <4> [<0000000000206dce>] vfs_read+0x152/0x15c <4> [<0000000000206ed0>] SyS_read+0x54/0xac <4> [<0000000000117c8e>] sysc_noemu+0x10/0x16 <4> [<00000042ff8def3c>] 0x42ff8def3c Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hendrik Brueckner authored
For non-accepted sockets on the accept queue, iucv_sock_kill() is called twice (in iucv_sock_close() and iucv_sock_cleanup_listen()). This typically results in a kernel oops as shown below. Remove the duplicate call to iucv_sock_kill() and set the SOCK_ZAPPED flag in iucv_sock_close() only. The iucv_sock_kill() function frees a socket only if the socket is zapped and orphaned (sk->sk_socket == NULL): - Non-accepted sockets are always orphaned and, thus, iucv_sock_kill() frees the socket twice. - For accepted sockets or sockets created with iucv_sock_create(), sk->sk_socket is initialized. This caused the first call to iucv_sock_kill() to return immediately. To free these sockets, iucv_sock_release() uses sock_orphan() before calling iucv_sock_kill(). <1>Unable to handle kernel pointer dereference at virtual kernel address 000000003edd3000 <4>Oops: 0011 [#1] PREEMPT SMP DEBUG_PAGEALLOC <4>Modules linked in: af_iucv sunrpc qeth_l3 dm_multipath dm_mod qeth vmur ccwgroup <4>CPU: 0 Not tainted 2.6.30 #4 <4>Process iucv_sock_close (pid: 2486, task: 000000003aea4340, ksp: 000000003b75bc68) <4>Krnl PSW : 0704200180000000 000003e00168e23a (iucv_sock_kill+0x2e/0xcc [af_iucv]) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 <4>Krnl GPRS: 0000000000000000 000000003b75c000 000000003edd37f0 0000000000000001 <4> 000003e00168ec62 000000003988d960 0000000000000000 000003e0016b0608 <4> 000000003fe81b20 000000003839bb58 00000000399977f0 000000003edd37f0 <4> 000003e00168b000 000003e00168f138 000000003b75bcd0 000000003b75bc98 <4>Krnl Code: 000003e00168e22a: c0c0ffffe6eb larl %r12,3e00168b000 <4> 000003e00168e230: b90400b2 lgr %r11,%r2 <4> 000003e00168e234: e3e0f0980024 stg %r14,152(%r15) <4> >000003e00168e23a: e310225e0090 llgc %r1,606(%r2) <4> 000003e00168e240: a7110001 tmll %r1,1 <4> 000003e00168e244: a7840007 brc 8,3e00168e252 <4> 000003e00168e248: d507d00023c8 clc 0(8,%r13),968(%r2) <4> 000003e00168e24e: a7840009 brc 8,3e00168e260 <4>Call Trace: <4>([<000003e0016b0608>] afiucv_dbf+0x0/0xfffffffffffdea20 [af_iucv]) <4> [<000003e00168ec6c>] iucv_sock_close+0x130/0x368 [af_iucv] <4> [<000003e00168ef02>] iucv_sock_release+0x5e/0xe4 [af_iucv] <4> [<0000000000438e6c>] sock_release+0x44/0x104 <4> [<0000000000438f5e>] sock_close+0x32/0x50 <4> [<0000000000207898>] __fput+0xf4/0x250 <4> [<00000000002038aa>] filp_close+0x7a/0xa8 <4> [<00000000002039ba>] SyS_close+0xe2/0x148 <4> [<0000000000117c8e>] sysc_noemu+0x10/0x16 <4> [<00000042ff8deeac>] 0x42ff8deeac Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hendrik Brueckner authored
After resuming from suspend, all af_iucv sockets are disconnected. Ensure that iucv_accept_dequeue() can handle disconnected sockets which are not yet accepted. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hendrik Brueckner authored
Moving prepare_to_wait before the condition to avoid a race between schedule_timeout and wake up. The race can appear during iucv_sock_connect() and iucv_callback_connack(). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hendrik Brueckner authored
The iucv_query_maxconn() function uses the wrong output register and stores the size of the interrupt buffer instead of the maximum number of connections. According to the QUERY IUCV function, general register 1 contains the maximum number of connections. If the maximum number of connections is not set properly, the following warning is displayed: Badness at /usr/src/kernel-source/2.6.30-39.x.20090806/net/iucv/iucv.c:1808 Modules linked in: netiucv fsm af_iucv sunrpc qeth_l3 dm_multipath dm_mod vmur qeth ccwgroup CPU: 0 Tainted: G W 2.6.30 #4 Process seq (pid: 16925, task: 0000000030e24a40, ksp: 000000003033bd98) Krnl PSW : 0404200180000000 000000000053b270 (iucv_external_interrupt+0x64/0x224) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 Krnl GPRS: 00000000011279c2 00000000014bdb70 0029000000000000 0000000000000029 000000000053b236 000000000001dba4 0000000000000000 0000000000859210 0000000000a67f68 00000000008a6100 000000003f83fb90 0000000000004000 000000003f8c7bc8 00000000005a2250 000000000053b236 000000003fc2fe08 Krnl Code: 000000000053b262: e33010000021 clg %r3,0(%r1) 000000000053b268: a7440010 brc 4,53b288 000000000053b26c: a7f40001 brc 15,53b26e >000000000053b270: c03000184134 larl %r3,8434d8 000000000053b276: eb220030000c srlg %r2,%r2,48 000000000053b27c: eb6ff0a00004 lmg %r6,%r15,160(%r15) 000000000053b282: c0f4fffff6a7 brcl 15,539fd0 000000000053b288: 4310a003 ic %r1,3(%r10) Call Trace: ([<000000000053b236>] iucv_external_interrupt+0x2a/0x224) [<000000000010e09e>] do_extint+0x132/0x190 [<00000000001184b6>] ext_no_vtime+0x1e/0x22 [<0000000000549f7a>] _spin_unlock_irqrestore+0x96/0xa4 ([<0000000000549f70>] _spin_unlock_irqrestore+0x8c/0xa4) [<00000000002101d6>] pipe_write+0x3da/0x5bc [<0000000000205d14>] do_sync_write+0xe4/0x13c [<0000000000206a7e>] vfs_write+0xae/0x15c [<0000000000206c24>] SyS_write+0x54/0xac [<0000000000117c8e>] sysc_noemu+0x10/0x16 [<00000042ff8defcc>] 0x42ff8defcc Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hendrik Brueckner authored
Prior to calling IUCV functions, the DECLARE BUFFER function must have been called for at least one CPU to receive IUCV interrupts. With commit "iucv: establish reboot notifier" (6c005961), a check has been introduced to avoid calling IUCV functions if the current CPU does not have an interrupt buffer declared. Because one interrupt buffer is sufficient, change the condition to ensure that one interrupt buffer is available. In addition, checking the buffer on the current CPU creates a race with CPU up/down notifications: before checking the buffer, the IUCV function might be interrupted by an smp_call_function() that retrieves the interrupt buffer for the current CPU. When the IUCV function continues, the check fails and -EIO is returned. If a buffer is available on any other CPU, the IUCV function call must be invoked (instead of failing with -EIO). Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ursula Braun authored
During suspend IUCV exploiters have to close their IUCV connections. When restoring an image, it can be checked if all IUCV pathes had been closed before the Linux instance was suspended. If not, an error message is issued to indicate a problem in one of the used programs exploiting IUCV communication. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dongdong Deng authored
net/core/netpoll.c::netpoll_send_skb() calls the poll handler when it is available. As netconsole can be used from almost any context, IRQ must not be enabled blindly in the NAPI handler of the driver which supports netpoll. Call trace: netpoll_send_skb() { local_irq_save(flags) -> netpoll_poll() -> poll_napi() -> poll_one_napi() -> napi->poll() -> b44_poll() local_irq_restore(flags) } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jens Rosenboom authored
RFC4191 says that "If the Reserved (10) value is received, the Route Information Option MUST be ignored.", so this patch makes us conform to the RFC. This is different to the usage of the Default Router Preference, where an invalid value must indeed be treated as PREF_MEDIUM. Signed-off-by: Jens Rosenboom <me@jayr.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
When I was implementing primary_passive option (formely named primary_lazy) I've run into troubles with ab_arp. This is the only mode which is not using bond_select_active_slave() function to select active slave and instead it selects it itself. This seems to be not the right behaviour and it would be better to do it in bond_select_active_slave() for all cases. This patch makes this happen. Please review. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 16 Sep, 2009 5 commits
-
-
Johannes Berg authored
There's a check saying /* we're good if we have both BSSID and channel */ if (wdev->conn->params.bssid && wdev->conn->params.channel) { but that isn't true -- we need the BSS struct. This leads to errors such as Trying to associate with 00:1b:53:11:dc:40 (SSID='TEST' freq=2412 MHz) ioctl[SIOCSIWFREQ]: No such file or directory ioctl[SIOCSIWESSID]: No such file or directory Association request to the driver failed Associated with 00:1b:53:11:dc:40 in wpa_supplicant, as reported by Holger. Instead, we really need to have the BSS struct, and if we don't, then we need to initiate a scan for it. But we may already have the BSS struct here, so hang on to it if we do and scan if we don't. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Tested-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Pavel Roskin authored
The contention window is supposed to be a power of two minus one, i.e. 15, 31, 63, 127... minstrel_rate_init() forgets to subtract 1, so the sequence becomes 15, 32, 66, 134... Bug reported by Dan Halperin <dhalperi@cs.washington.edu> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Randy Dunlap authored
Fix printk format warnings: drivers/ssb/sdio.c:336: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t' drivers/ssb/sdio.c:443: warning: format '%u' expects type 'unsigned int', but argument 7 has type 'size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Christian Lamparter authored
This patch adds a new usbid for Zcomax XG-705A to the device table. Cc: stable@kernel.org Reported-by: Jari Jaakola <jari.jaakola@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
David Howells authored
Use uX rather than uintX_t types for consistency. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-