- 28 Apr, 2008 2 commits
-
-
Johannes Weiner authored
After the loop in walk_pte_range() pte might point to the first address after the pmd it walks. The pte_unmap() is then applied to something bad. Spotted by Roel Kluin and Andreas Schwab. Signed-off-by: Johannes Weiner <hannes@saeurebad.de> Cc: Roel Kluin <12o3l@tiscali.nl> Cc: Andreas Schwab <schwab@suse.de> Acked-by: Matt Mackall <mpm@selenic.com> Acked-by: Mikael Pettersson <mikpe@it.uu.se> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Ingo Molnar authored
Adrian Bunk noticed the following Coverity report: > Commit e7f260a2 > (x86: PAT use reserve free memtype in mmap of /dev/mem) > added the following gem to arch/x86/mm/pat.c: > > <-- snip --> > > ... > int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, > unsigned long size, pgprot_t *vma_prot) > { > u64 offset = ((u64) pfn) << PAGE_SHIFT; > unsigned long flags = _PAGE_CACHE_UC_MINUS; > unsigned long ret_flags; > ... > ... (nothing that touches ret_flags) > ... > if (flags != _PAGE_CACHE_UC_MINUS) { > retval = reserve_memtype(offset, offset + size, flags, NULL); > } else { > retval = reserve_memtype(offset, offset + size, -1, &ret_flags); > } > > if (retval < 0) > return 0; > > flags = ret_flags; > > if (pfn <= max_pfn_mapped && > ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) { > free_memtype(offset, offset + size); > printk(KERN_INFO > "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n", > current->comm, current->pid, > cattr_name(flags), > offset, offset + size); > return 0; > } > > *vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) | > flags); > return 1; > } > > <-- snip --> > > If (flags != _PAGE_CACHE_UC_MINUS) we pass garbage from the stack to > ioremap_change_attr() and/or __pgprot(). > > Spotted by the Coverity checker. the fix simplifies the code as we get rid of the 'ret_flags' complication. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 27 Apr, 2008 38 commits
-
-
Linus Torvalds authored
Ingo already fixed one of these at my request (in "x86 PAT: tone down debugging messages", commit 1ebcc654), but there was another one he missed. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (40 commits) [SCSI] jazz_esp, sgiwd93, sni_53c710, sun3x_esp: fix platform driver hotplug/coldplug [SCSI] aic7xxx: add const [SCSI] aic7xxx: add static [SCSI] aic7xxx: Update _shipped files [SCSI] aic7xxx: teach aicasm to not emit unused debug code/data [SCSI] qla2xxx: Update version number to 8.02.01-k2. [SCSI] qla2xxx: Correct regression in relogin code. [SCSI] qla2xxx: Correct misc. endian and byte-ordering issues. [SCSI] qla2xxx: make qla2x00_issue_iocb_timeout() static [SCSI] qla2xxx: qla_os.c, make 2 functions static [SCSI] qla2xxx: Re-register FDMI information after a LIP. [SCSI] qla2xxx: Correct SRB usage-after-completion/free issues. [SCSI] qla2xxx: Correct ISP84XX verify-chip response handling. [SCSI] qla2xxx: Wakeup DPC thread to process any deferred-work requests. [SCSI] qla2xxx: Collapse RISC-RAM retrieval code during a firmware-dump. [SCSI] m68k: new mac_esp scsi driver [SCSI] zfcp: Add some statistics provided by the FCP adapter to the sysfs [SCSI] zfcp: Print some messages only during ERP [SCSI] zfcp: Wait for free SBAL during exchange config [SCSI] scsi_transport_fc: fc_user_scan correction ...
-
Kay Sievers authored
Since commit 43cc71ee Author: Kay Sievers <kay.sievers@vrfy.org> Date: Sat Aug 18 04:40:39 2007 +0200 platform: prefix MODALIAS with "platform:" the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable SCSI platform drivers, to re-enable auto loading. [dbrownell@users.sourceforge.net: more drivers, registration fixes] [akpm@linux-foundation.org: fix sgiwd93.c] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Denys Vlasenko authored
This patch adds more const keywords where appropriate. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Denys Vlasenko authored
This patch adds static (and sometimes const) keywords where appropriate. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Hannes Reinecke authored
Update the precompiled sequencer code to match the latest aicasm changes. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Hannes Reinecke authored
Add a 'count' variable to each symbol which gets increased every time the symbol is referenced. And then modify the register definition to include counts for symbols which are referenced from the source code only and not from the sequencer code. This will give us an automatic usage count for the symbols with only minimal hand-crafting. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Commit 63a8651f ([SCSI] qla2xxx: Correct infinite-login-retry issue.) introduced a small regression where a successful relogin would result in an fcport's loop_id to be incorrectly reset to FC_NO_LOOP_ID. Only clear-out loopid, if retries have been 'truly' exhausted. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Seokmann Ju authored
There were several places in the driver which could cause byte ordering problem as provided by Al Viro <viro@ZenIV.linux.org.uk>. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Adrian Bunk authored
This patch makes the needlessly global qla2x00_issue_iocb_timeout() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Adrian Bunk authored
This patch makes the following needlessly global functions static: - qla2x00_alloc_work() - qla2x00_post_work() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Original code would (incorrectly) only re-register after a loop-down condition. Also, FDMI registration should be enabled by default. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
The driver is incorrectly assuming that the 'sp' reference held in qla2[x00|4xx]_abort_command() is valid after the mailbox command is issued to abort the exchange. It is *not*, as the command may be completed during interrupt context before control is returned to the mailbox caller. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Earlier code could trigger an infinite-retry if 1st invocation returned a non-CS_COMPLETE status. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Andrew Vasquez authored
Use the more efficient read-DMA'ble-buffer mailbox commands rather than reading a single word/dword at a time. We also remove a bulk of the duplicate mailbox command-handling codes in favor of more generic read-memory() routines (qla2xxx_dump_ram() and qla24xx_dump_ram()). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Finn Thain authored
Replace the mac_esp driver with a new one based on the esp_scsi core. For esp_scsi: add support for sync transfers for the PIO mode, add a new esp_driver_ops method to get the maximum dma transfer size (like the old NCR53C9x driver), and some cleanups. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Swen Schillig authored
The new FCP adapter statistics provide a variety of information about the virtual adapter (subchannel). In order to collect this information the zfcp driver is extended to query this information. The information provided by the new FCP adapter statistics can be fetched by reading from the following files in the sysfs filesystem /sys/class/scsi_host/host<n>/seconds_active /sys/class/scsi_host/host<n>/requests /sys/class/scsi_host/host<n>/megabytes /sys/class/scsi_host/host<n>/utilization These are the statistics on a virtual adapter (subchannel) level. The information provided is raw and not modified or interpreted by any means. No interpretation or modification of the values is done by the zfcp driver. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Swen Schillig authored
When statistics are polled from sysfs, the statistics use the same commands as the adapter initialization. Change the messages printed here, so they are only printed during initialization and not for each poll of adapter data. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Swen Schillig authored
When sending a exchange config data command, wait for a free SBAL. This does not matter during adapter initialization, but this is required for pulling adapter statistics during high I/O load. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Smart authored
Way back when, when the fc_user_scan routine was created, it kept some of its original logic that walked the rport list and kicked off a scan. Unfortunately, it didn't keep any of the locking around the rport list, nor did it consider the synchronous nature of the scan invoked. The result, there are some scan requests where the rport list changes, thus a subsequent scan is called on a bogus rport structure and the system NMI's. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Jeff Garzik authored
- where the 'irq' function argument is known never to be used, rename it to 'dummy' to make this more obvious - replace per-irq lookup functions and tables with a direct reference to data object obtained via 'dev_id' function argument, passed from request_irq() Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Randy Dunlap authored
scsi_transport_spi.c needs to #include <linux/sysfs.h>: next-20080423/drivers/scsi/scsi_transport_spi.c:1467: error: implicit declaration of function 'sysfs_update_group' make[3]: *** [drivers/scsi/scsi_transport_spi.o] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Adrian Bunk authored
This patch fixes off-by-one errors in error checks (the variables are used as array indexes for arrays with MAX_SCSI_TAR resp. MAX_LUN elements) spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
Hannes Reinecke authored
The function type_check() in aicasm grammar code was never used properly due to a bug. This patch fixes it up and ensures it's only called if appropriate. In addition the unused 16bit instruction are disabled, but left in the code for reference. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
James Bottomley authored
We're getting a WARN_ON from SLUB indicating that we're trying to free caches with in-use objects. The root cause is a new dependency in the command/sense free on unchecked_isa_dma. The WARN_ON is caused by drivers which change this in their setup after the command/sense cache is allocated. The fix is to move the allocation of this cache into scsi_add_host() so things like gdth have an opportunity to modify it between alloc and add (but *not* after). The true fix would be to move unchecked_isa_dma into the template and out of the host, so it because a truly read only variable. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvmLinus Torvalds authored
* 'kvm-updates-2.6.26' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: (147 commits) KVM: kill file->f_count abuse in kvm KVM: MMU: kvm_pv_mmu_op should not take mmap_sem KVM: SVM: remove selective CR0 comment KVM: SVM: remove now obsolete FIXME comment KVM: SVM: disable CR8 intercept when tpr is not masking interrupts KVM: SVM: sync V_TPR with LAPIC.TPR if CR8 write intercept is disabled KVM: export kvm_lapic_set_tpr() to modules KVM: SVM: sync TPR value to V_TPR field in the VMCB KVM: ppc: PowerPC 440 KVM implementation KVM: Add MAINTAINERS entry for PowerPC KVM KVM: ppc: Add DCR access information to struct kvm_run ppc: Export tlb_44x_hwater for KVM KVM: Rename debugfs_dir to kvm_debugfs_dir KVM: x86 emulator: fix lea to really get the effective address KVM: x86 emulator: fix smsw and lmsw with a memory operand KVM: x86 emulator: initialize src.val and dst.val for register operands KVM: SVM: force a new asid when initializing the vmcb KVM: fix kvm_vcpu_kick vs __vcpu_run race KVM: add ioctls to save/store mpstate KVM: Rename VCPU_MP_STATE_* to KVM_MP_STATE_* ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (49 commits) ide-tape: remove tape->merge_stage ide-tape: mv tape->merge_stage_size tape->merge_bh_size ide-tape: mv idetape_empty_write_pipeline ide_tape_flush_merge_buffer ide-tape: mv idetape_discard_read_pipeline ide_tape_discard_merge_buffer ide-tape: make __idetape_discard_read_pipeline() of type void ide: remove now unused ide_pci_create_host_proc() ide: remove /proc/ide/ali ide-tape: improve buffer pages freeing strategy ide-tape: mv tape->pages_per_stage tape->pages_per_buffer ide-tape: mv tape->stage_size tape->buffer_size ide-tape: improve buffer allocation strategy ide: add struct ide_io_ports (take 3) ide: make ide_unregister() take 'ide_hwif_t *' as an argument (take 2) ide: sanitize ide_unregister() usage mpc8xx-ide: use ide_find_port() ide: add "noacpi" / "acpigtf" / "acpionboot" parameters gayle: add "doubler" parameter ide: add "cdrom=" and "chs=" parameters ide: add "nodma|noflush|noprobe|nowerr=" parameters ide: remove obsoleted "hdx=autotune" kernel parameter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-idle-fixLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-idle-fix: fix idle (arch, acpi and apm) and lockdep
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - fix build failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: mlx4_core: Add helper to move QP to ready-to-send mlx4_core: Add HW queues allocation helpers RDMA/nes: Remove volatile qualifier from struct nes_hw_cq.cq_vbase mlx4_core: CQ resizing should pass a 0 opcode modifier to MODIFY_CQ mlx4_core: Move kernel doorbell management into core IB/ehca: Bump version number to 0026 IB/ehca: Make some module parameters bool, update descriptions IB/ehca: Remove mr_largepage parameter IB/ehca: Move high-volume debug output to higher debug levels IB/ehca: Prevent posting of SQ WQEs if QP not in RTS IPoIB: Handle 4K IB MTU for UD (datagram) mode RDMA/nes: Fix adapter reset after PXE boot RDMA/nes: Print IPv4 addresses in a readable format RDMA/nes: Use print_mac() to format ethernet addresses for printing
-
Al Viro authored
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
... and isn't possible on sparc32 boxen anyway, unless somebody had done JavaStation with PCIE lately. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Use kvm own refcounting instead of playing with ->filp->f_count. That will allow to get rid of a lot of crap in anon_inode_getfd() and kill a race in kvm_dev_ioctl_create_vm() (file might have been closed immediately by another thread, so ->filp might point to already freed struct file when we get around to setting it). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Avi Kivity <avi@qumranet.com>
-
Marcelo Tosatti authored
kvm_pv_mmu_op should not take mmap_sem. All gfn_to_page() callers down in the MMU processing will take it if necessary, so as it is it can deadlock. Apparently a leftover from the days before slots_lock. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
-
Joerg Roedel authored
There is not selective cr0 intercept bug. The code in the comment sets the CR0.PG bit. But KVM sets the CR4.PG bit for SVM always to implement the paged real mode. So the 'mov %eax,%cr0' instruction does not change the CR0.PG bit. Selective CR0 intercepts only occur when a bit is actually changed. So its the right behavior that there is no intercept on this instruction. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
-
Joerg Roedel authored
With the usage of the V_TPR field this comment is now obsolete. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
-