- 22 Jul, 2008 18 commits
-
-
Adrian Bunk authored
For C code spaces versus tabs is just a religious issue, but for Makefiles it actually matters. This patch fixes he following errors: /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:166: *** missing separator. Stop. /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/Makefile:171: *** missing separator. Stop. Since this was inside an ifdef DTC_GENPARSER it was not a problem unless someone wanted to regenerate the shipped generated files. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Acked-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Adrian Bunk authored
The real option is above in the same Kconfig file. Signed-off-by:
-
Michael Ellerman authored
Replace ifdef clutter with the PPC_LONG and PPC_LONG_ALIGN macros for readability. No change to the generated code. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
Use the new PPC_LONG_ALIGN macro instead of passing an argument to the asm for consistency. Signed-off-by:
-
Michael Ellerman authored
Add a #define for aligning to a long-sized boundary. It would be nice to use sizeof(long) for this, but that requires generating the value with asm-offsets.c, and asm-offsets.c includes asm-compat.h and we descend into some sort of recursive include hell. Signed-off-by:
-
Benjamin Herrenschmidt authored
The OF parsing code for PCI addresses isn't always treating properly the address space indication 0b11 (ie. 0x3) as meaning 64 bits memory space. This means that it fails to parse addresses for PCI BARs that have this encoding set by the firmware, which happens on some SLOF versions and breaks offb palette handling on Powerstation. Signed-off-by:
Segher Boessenkool <segher@kernel.crashing.org>
-
Michael Ellerman authored
__WARN() is not defined for all configs, use WARN_ON(1) instead. Signed-off-by:
-
Arnd Bergmann authored
We need to pass the kernel stack pointer instead of the user space stack pointer in save_stack_trace_tsk(). Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Geoff Levand authored
Update ps3_defconfig. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Masakazu Mokuno authored
Add sub match id for ps3 system bus so that two different system bus devices can be connected to a shared device. Signed-off-by:
Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by:
-
Kumar Gala authored
This is a defconfig from Dave Jones and should be similar (if not identical) to the fedora ppc32 defconfig. The intent is to cover all cache coherent 6xx based chips and platforms as reasonable. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Mark Nelson authored
Update iommu_alloc() to take the struct dma_attrs and pass them on to tce_build(). This change propagates down to the tce_build functions of all the platforms. Signed-off-by:
Mark Nelson <markn@au1.ibm.com> Signed-off-by:
-
Christian Krafft authored
This patch adds support for the power button on future IBM cell blades. It actually doesn't shut down the machine. Instead it exposes an input device /dev/input/event0 to userspace which sends KEY_POWER if power button has been pressed. haldaemon actually recognizes the button, so a plattform independent acpid replacement should handle it correctly. Signed-off-by:
Christian Krafft <krafft@de.ibm.com> Signed-off-by:
-
Christian Krafft authored
This patch adds a config option for the sysreset_hack used for IBM Cell blades. The code is moves from pervasive.c into ras.c and gets it's own init method. Signed-off-by:
-
Christian Krafft authored
This patch adds a cpufreq governor that takes the number of running spus into account. It's very similar to the ondemand governor, but not as complex. Instead of hacking spu load into the ondemand governor it might be easier to have cpufreq accepting multiple governors per cpu in future. Don't know if this is the right way, but it would keep the governors simple. Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Maxim Shchetynin authored
DDR2 memory DIMMs on the Axon could be accessed only as one partition when using file system drivers which are using the direct_access() method. This patch enables for such file system drivers to access Axon's DDR2 memory even if it is splitted in several partitions. Signed-off-by:
Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by:
-
Maxim Shchetynin authored
Axonram module registers one block device for each DDR2 DIMM found on a system. This means that each DDR2 DIMM becomes its own block device major number. This patch lets axonram module to register the only one block device for all DDR2 DIMMs which also spares kernel resources. Signed-off-by:
-
Wolfgang Grandegger authored
Since commit 7560fa60 (gpio: <linux/gpio.h> and "no GPIO support here" stubs) drivers can use GPIOs if they're available, but don't require them. This patch actually enables this feature. Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
- 16 Jul, 2008 22 commits
-
-
Timur Tabi authored
The defconfigs for Freescale 85xx and 86xx SOCs had bad choices for some audio related options. In particular, OSS emulation should be enabled, and the old ALSA API should be disabled. Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
-
Kumar Gala authored
This reverts commit e3621ee6. This was not the proper fix. As Scott Wood said CONFIG_FS_ENET has nothing to do with the issue. The proper fix is to select PHYLIB for this board.
-
Kumar Gala authored
Its possible to build the phylib as a module, however this breaks the board code because alloc_mdio_bitbang and mdiobus_register are not available if we build as a module. These are needed by the board code since it implements the low level mdio bitbang ops. So we unconditionally select PHYLIB to ensure its built into the kernel if we are building in EP8248E support. Long term we should look at moving the mdio_ops into its own file so it can be built as a module. Signed-off-by: -
Kumar Gala authored
Use the TLBSYNC macro defined in ppc_asm.h rather than our own ifdefs. Signed-off-by: -
Kumar Gala authored
This converts the FSL Book-E PTE access and TLB miss handling to match with the recent changes to 44x that introduce support for non-atomic PTE operations in pgtable-ppc32.h and removes write back to the PTE from the TLB miss handlers. In addition, the DSI interrupt code no longer tries to fixup write permission, this is left to generic code, and _PAGE_HWWRITE is gone. Signed-off-by: -
Kumar Gala authored
With arch/ppc gone and all in kernel users of CONFIG_PPC_CPM_NEW_BINDING fixed up we dont have need for the Kconfig option anymore. Signed-off-by: -
Kumar Gala authored
Now that arch/ppc is gone we always define CONFIG_PPC_CPM_NEW_BINDING so we can remove all the code associated with !CONFIG_PPC_CPM_NEW_BINDING. Also fixed some asm/of_platform.h to linux/of_platform.h (and of_device.h) Signed-off-by: -
Scott Wood authored
Signed-off-by:
Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Scott Wood authored
Signed-off-by:
-
Andy Fleming authored
Mostly having to do with not marking things __iomem. And some failure to use appropriate accessors to read MMIO regs. Signed-off-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
-
Andy Fleming authored
The old code assumed there was only one, but the 8572 actually has 3. Also, our usual id, 0xe0024520, gets resolved to -1 somewhere, and this was preventing the multiple buses from having different ids. So we only keep the low 20 bits, which have the interesting info, anyway. Signed-off-by:
-
Anton Vorontsov authored
The ULI "Super South Bridge" contains ISA bridge to the legacy devices, such as Super IO mouse/keyboard/floppy disk controllers, parallel port, i8259 interrupt controller and so on. i8259 is disabled on the MPC8610HPCD, and other peripherals are not traced out. So we use only RTC. Signed-off-by:
-
Anton Vorontsov authored
- Get rid of uses_fsl_uli_m1575, it does not scale for all cases. Instead, let's explicitly use machine_is() for each fixup. - Factor out MPC8610HPCD quirks to fsl_uli1575, and protect them with machine_is(). One step closer to multiplatform kernels. - Actually use fsl_uli1575 on MPC8610HPCD, so RTC quirk will be applied. - RTC quirk applies to all boards though, so no machine_is() checks. Signed-off-by:
-
Anton Vorontsov authored
This patch fixes RTC on MPC8572DS boards: dummy read helps only when reading at the end of the bridge's memory (i.e. outside of behind the bridge devices' assigned regions). With this change the quirk also makes RTC work on MPC8610HPCD, so it's unlikely that this will break MPC8641HPCN or MPC8544DS boards. Signed-off-by:
-
Jochen Friedrich authored
Signed-off-by:
Jochen Friedrich <jochen@scram.de> Signed-off-by:
-
Anton Vorontsov authored
This patch adds few bindings for the new drivers to be submitted through the appropriate maintainers. Signed-off-by:
-
Anton Vorontsov authored
Freescale ships MPC8315E-RDB boards in two variants: 1. With TSEC1 ethernet support and USB UTMI PHY; 2. Without TSEC1 support, but with USB ULPI PHY in addition. For the second case U-Boot will add status = "disabled"; property into the TSEC1 node, so Linux should not try to probe it. Signed-off-by:
-
Anton Vorontsov authored
We must not use MPC831X_SICR[HL]_* definitions for the MPC8315 processors, because SICR USB bits locations are not compatible with MPC8313. This patch fixes ULPI workability on MPC8315E-RDB boards. Signed-off-by:
-
John Rigby authored
This allows other platforms with the same pci block like MPC5121 to use it. Signed-off-by:
John Rigby <jrigby@freescale.com> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
John Rigby authored
Choosing PCI or not at config time is allowed on some platforms via an if expression in arch/powerpc/Kconfig. To add a new platform with PCI support selectable at config time, you must change the if expression. This patch makes this easier by changing: bool "PCI support" if <long expression> to bool "PCI support" if PPC_PCI_CHOICE and adding select PPC_PCI_CHOICE to all the config nodes that were previously in the PCI if expression. Platforms with unconditional PCI support continue to just select PCI in their config nodes. Signed-off-by: -
Paul Gortmaker authored
The mpc7448hpc2 board doesn't have an alias block like most of the other modern eval boards have. We need this block in order to have u-boot be able to make use of the CONFIG_OF_STDOUT_VIA_ALIAS (vs. having a hard coded node) in the future. Also remove the old, redundant chosen node. Of all the modern Freescale eval boards (incl. 83xx, 85xx, 86xx) this is the only one which still has it. Its presence also breaks with some older versions of u-boot, like 1.3.1 -- which try and insert a second chosen node. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
-
Scott Wood authored
Signed-off-by:
-
