- 23 Sep, 2009 40 commits
-
-
Li Yang authored
Change the F entry for file rename, and make it also cover fsl_qe_udc driver. Update the name accordingly. Signed-off-by:
Li Yang <leoli@freescale.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Julia Lawall authored
Correct priority problem in the use of ! and &. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression E; constant C; @@ - !E & C + !(E & C) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Jon Hunter authored
This patch was previously discussed in the following thread: http://thread.gmane.org/gmane.linux.usb.general/19472/focus=19484 On the OMAP3 device the usbhost controller is in a separate internal power-domain. So when the usbhost is inactive or suspend is called, we can disable clocks and power-down the usbhost to save power. Recently we found that after calling ehci_bus_suspend() and disabling the usbhost clocks we would see the ehci watchdog timer event fire. This was causing a kernel panic because the usbhost controllers clocks were disabled and inside the watchdog timer function the clocks were not being re-enabled, so when the ehci registers were accessed this resulted in a CPU data-abort. To avoid this panic, per recommendation from Alan Stern (see above thread), we make sure any pending timer events (that may have been scheduled by calling ehci_work within the ehci_bus_suspend() function) are deleted before returning. Signed-off-by:
Fei Yang <fei.yang@motorola.com> Signed-off-by:
Jon Hunter <jon-hunter@ti.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ming Lei authored
This patch fixes the .probe failure of twl4030_usb driver if it is compiled into kernel. Since twl4030_usb USB transceiver .probe depends on twl4030-regulator, marking twl4030_usb_init as subsys_initcall_sync can make it called after twl4030-regulator initialization is finished, then twl4030_usb USB transceiver driver can be probed successfully. Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Ajay Kumar Gupta authored
Invoke put_device(musb->xceiv->dev) before musb_platform_exit()as xceiv is getting unregistered in musb_platform_exit(). Fixes put_device() panic when module insert/removal is performed multiple times. Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Woodhouse authored
We are seeing a number of crashes in SMM, when VT-d is enabled while 'Legacy USB support' is enabled in various BIOSes. The BIOS is supposed to indicate which addresses it uses for DMA in a special ACPI table ("RMRR"), so that we can punch a hole for it when we set up the IOMMU. The problem is, as usual, that BIOS engineers are totally incompetent. They write code which will crash if the DMA goes AWOL, and then they either neglect to provide an RMRR table at all, or they put the wrong addresses in it. And of course they don't do _any_ QA, since that would take too much time away from their crack-smoking habit. The real fix, of course, is for consumers to refuse to buy motherboards which only have closed-source firmware available. If we had _open_ firmware, bugs like this would be easy to fix. Since that's something I can only dream about, this patch implements an alternative -- ensuring that the USB controllers are handed off from the BIOS and quiesced _before_ the IOMMU is initialised. That would have been a much better design than this RMRR nonsense in the first place, of course. The bootloader has no business doing DMA after the OS has booted anyway. Signed-off-by:David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Markus Rechberger authored
The current limit only allows isochronous transfers up to 32kbyte/urb, updating this to 192 kbyte/urb improves the reliability of the transfer. USB 2.0 transfer is possible with 32kbyte but increases the chance of corrupted/incomplete data when the system is performing some other tasks in the background. http://www.spinics.net/lists/linux-usb/msg19955.htmlSigned-off-by:
Markus Rechberger <mrechberger@gmail.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Ken MacLeod authored
HCHWCFG_PULLDOWN_DS2 and HCHWCFG_PULLDOWN_DS1 were swapped. Incorrect operator precedence in isp1362_hc_start() hid part of the problem. This fixes a problem where Port 1 in Host mode fails to see disconnects. Signed-Off-By:
Ken MacLeod <ken@bitsko.slc.ut.us> Signed-off-by:
-
Robin Callender authored
The included patch can be applied to the new usb gadget audio driver. It addresses a seg-fault in uncovered in g_audio.ko. The fault occurs in the function u_audio.c::gaudio_open_end_dev() when device /dev/snd/pcmC0D0c (FILE_PCM_CAPTURE) is not present. I suspect there may be similar problems with device /dev/snd/pcmC0D0p (FILE_PCM_PLAYBACK) handling also. I leave that for the developer(s), as I was unsure as to the side-effects of not calling playback_default_hw_params() in the initialization phase. Signed-off-by:
Robin Callender <robin_callender@hotmail.com> Signed-off-by:
-
Roel Kluin authored
Check whether index is within bounds before testing the element. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
fangxiaozhi authored
In this patch, we always make the return value of function usb_stor_huawei_e220_init to be zero. Then it will not prevent usb-storage driver from attaching to the CDROM device of Huawei Datacard. Signed-off-by:
fangxiaozhi <huananhu@huawei.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Ondrej Zary authored
Add IrDA support to ark3116 driver. This makes Gembird UIR-22 USB to IrDA adapter work (vendor ID 0x18ec, device ID 0x3118). This adapter contains ARK3116T USB serial chip and an IrDA transceiver, thus a command like "irattach /dev/ttyUSB0 -s" is needed. All magic numbers were captured using usbsnoop from windows driver that came with the device. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Aric Blumer authored
Some ohci-pxa27x platforms may require OCPM and NOCP in UHCRHDA to be clear, but the existing code was only allowing setting. This patch ensures that these bits are clear if the respective flags are not set. This is particularly important for the PXA3xx family where the documentation says OCPM must be cleared, but it is set after reset. Signed-off-by:
Aric Blumer <aric@sdgsystems.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Anand Gadiyar authored
EHCI: OHCI: Remove unnecessary includes of reboot.h Signed-off-by:
Anand Gadiyar <gadiyar@ti.com> Acked-by:
-
Michael S. Tsirkin authored
include/linux/usb/audio.h is exported to userspace, so part of this file that is for internal kernel usage need to be guarded with ifdef __KERNEL__. This way make headers_install will stript it out. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Nicolas Ferre authored
At91sam9g45 series has a set of high speed USB interfaces. The host driver is an EHCI with its companion OHCI. OHCI is always handled by ohci-at91.c. This wrapper is just modified to allow IRQ sharing between two controllers. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
-
Nicolas Ferre authored
Add gadget USB drivers for at91sam9g45 series. Those SOC include high speed USB interfaces. The gadget driver is the already available atmel_usba_udc. Signed-off-by:
-
Nicolas Ferre authored
Add host USB High speed driver for at91sam9g45 series. The host driver is an EHCI with its companion OHCI. EHCI is handled by the new ehci-atmel.c whereas the OHCI is always handled by ohci-at91.c. Signed-off-by:
-
Bob Liu authored
Signed-off-by:
Bob Liu <yjfpb04@gmail.com> Acked-by:
-
Randy Dunlap authored
Fix printk format warnings: drivers/usb/class/usbtmc.c:466: warning: format '%zu' expects type 'size_t', but argument 4 has type 'u32' drivers/usb/class/usbtmc.c:466: warning: format '%zu' expects type 'size_t', but argument 5 has type 'int' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Guus Sliepen authored
According to the specifications, an instrument should not return more data in a DEV_DEP_MSG_IN urb than requested. However, some instruments can send more than requested. This could cause the kernel to write the extra data past the end of the buffer provided by read(). Fix this by checking that the value of the TranserSize field is not larger than the urb itself and not larger than the size of the userspace buffer. Also correctly decrement the remaining size of the buffer when userspace read()s more than USBTMC_SIZE_IOBUFFER. Signed-off-by:
Guus Sliepen <guus@sliepen.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Lothar Wassmann authored
Signed-off-by:
Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Alan Stern authored
This patch (as1269) fixes a bug in the way dummy_hcd handles control URBs. Currently it returns a -EOVERFLOW error if the wLength value in the setup packet is different from the URB's transfer_buffer_length. Other host controller drivers don't do this. There's no reason the two length values have to be equal, and in fact they sometimes aren't -- a driver might set the transfer length to the maxpacket value in order to handle buggy devices that don't respect wLength. This patch simply removes the unnecessary check and error return. Signed-off-by:
-
Alan Stern authored
This patch (as1268) changes the way usbcore handles child devices that undergo a disconnection and reconnection while the parent hub is suspended. Currently, if the child isn't enabled for remote wakeup we leave it alone, figuring that it will go through a reset-resume when somebody tries to use it. However this isn't a good approach if the reason for the disconnection is that the child decided to switch modes or in some other way alter its descriptors. In that case we want to re-enumerate it as soon as possible, not wait until somebody forces a reset-resume. To resolve the issue, this patch treats reconnected suspended child devices as though they had requested a remote wakeup, even if they weren't enabled for it. The mode switch or descriptor change will be detected during the reset part of the reset-resume, and the device will be re-enumerated immediately. The disadvantage of this change is that it will cause autosuspended devices to be resumed when the computer wakes up from a system sleep during which the root hub was reset or lost power. This shouldn't matter much; some people would even argue that autosuspended devices should _always_ be resumed when the system wakes up! Signed-off-by:
-
Alan Stern authored
This patch (as1267) changes usb_kick_khubd() and hdev_to_hub() to make them more resilient against situations where a hub device isn't bound to the hub driver. The code assumes that if a root hub was successfully registered then it must be bound to the hub driver. But this assumption can fail if the user manually unbinds the hub driver, or more importantly, if the host controller dies causing usb_set_configuration to fail. To protect against these possibilities, make hdev_to_hub() check that the hub device is configured before dereferencing the active configuration, and make usb_kick_khubd() check that the pointer to the hub's private data structure isn't NULL. Signed-off-by:
-
Oliver Neukum authored
if a subdriver has an additional suspend method, it must be called first to allow the subdriver to return -EBUSY, because the second half cannot be easily undone. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Manuel Lauss authored
move both ohci-au1xxx and ehci-au1xxx over to dev_pm_ops. Tested on Au1200. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by:
-
Julia Lawall authored
In each case, the NULL test is not necessary because the function is static and at the only places where it is called, the us argument has already been dereferenced. The semantic patch that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E,E1; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E=E1 when != i if (E == NULL||...) S + i = E->fld; // </smpl> Signed-off-by:
-
Maxin John authored
Spelling correction in Motorola USB Phone driver Changed: * Mororola should be using the CDC ACM USB spec, but instead To: * Motorola should be using the CDC ACM USB spec, but instead Signed-off-by:
Maxin B. John <maxinbjohn@gmail.com> Signed-off-by:
-
Michael Hennerich authored
Platform device support was merged earlier, but support for boards to customize the devflags aspect of the controller was not. We want this on Blackfin systems to control the bus width, but might as well expose all of the fields while we're at it. Signed-off-by:
-
Alek Du authored
The Intel Moorestown EHCI controller supports non-standard HOSTPCx register extension. This register controls the LPM behaviour and controls the behaviour of each USB port. Signed-off-by:
Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by:
Alek Du <alek.du@intel.com> Acked-by:
-
Alek Du authored
The ehci_qh structure merged hw and sw together which is not good: 1. More and more items are being added into ehci_qh, the ehci_qh software part are unnecessary to be allocated in DMA qh_pool. 2. If HCD has local SRAM, the sw part will consume it too, and it won't bring any benefit. 3. For non-cache-coherence system, the entire ehci_qh is uncachable, actually we only need the hw part to be uncacheable. Spliting them will let the sw part to be cacheable. Signed-off-by:
-
Alek Du authored
Basically the io watchdog is only useful for those quirk HCDs. For most good ones, it only brings unnecessary wakeups. At least, I know the Intel EHCI HCDs should turn off the flag. Signed-off-by:
-
Oliver Neukum authored
This patch adds to the usbsevseg driver: - suspend/resume support - reset_resume support - autosuspend using the display's power state to determine idleness Signed-off-by:
Harrison Metzger <harrisonmetz@gmail.com>
-
Oliver Neukum authored
usb: full runtime PM support for idmouse driver - add suspend/resume support - add reset_resume support - add support for autosuspend Signed-off-by:
Andreas Deresch <aderesch@fs.tum.de>
-
Roel Kluin authored
Add missing parentheses Signed-off-by:
-
Julia Lawall authored
list_entry, which is an alias for container_of, cannot return NULL, as there is no way to add a NULL value to a doubly linked list. A simplified version of the semantic match that findds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S1,S2; position p,p1; @@ *x = list_entry@p(...) ... when != x = E *if@p1 (x == NULL) S1 else S2 // </smpl> Signed-off-by:
-
Oliver Neukum authored
poll() should test for a disconnection of the device. Signed-off-by:
-
Oliver Neukum authored
poll needs to return an error if a device is disconnected - make poll check for device's presence - wake all waiters in disconnect Signed-off-by:
-
Oliver Neukum authored
a class driver should have suspend/resume. This makes sure we don't see a virtual disconnect unnecessarily. Signed-off-by:
-
