Commit block was intended to have several copies of the header. But
due to a bug it never had them and actually, nobody checks that. So
just remove the useless loop.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

The buffer head pointer passed to journal_wait_on_commit_record() could
be NULL if the previous journal_submit_commit_record() failed or journal
has already aborted.

Looking at the jbd2 debug messages, before the oops happened, the jbd2
is aborted due to trying to access the next log block beyond the end
of device. This might be caused by using a corrupted image.

We need to check the error returns from journal_submit_commit_record()
and avoid calling journal_wait_on_commit_record() in the failure case.

This addresses Kernel Bugzilla #9849
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] dynamic page tables.
  [S390] Add four level page tables for CONFIG_64BIT=y.
  [S390] 1K/2K page table pages.
  [S390] Remove a.out header file.
  [S390] sclp_vt220: Fix vt220 initialization
  [S390] qdio: avoid hang when establishing qdio queues
  [S390] VMEM_MAX_PHYS overflow on 31 bit.
  [S390] zcrypt: Do not start ap poll thread per default
  [S390] Fix __ffs_word_loop/__ffz_word_loop inlnie assembly.
  [S390] Wire up new timerfd syscalls.
  [S390] Update default configuration.

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  Kbuild: Fix deb-pkg target to work with kernel versions ending with -<text-without-digit>
  ide: introduce HAVE_IDE
  kbuild: silence CHK/UPD messages according to $(quiet)
  scsi: fix makefile for aic7(3*x)
  kbuild/modpost: Use warn() for announcing section mismatches
  Add binoffset to gitignore
  kbuild/modpost: improve warnings if symbol is unknown

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  Merge branches 'release' and 'buildfix' into release
  acer-wmi - Add documentation
  sonypi - Move sonypi.txt to Documentation/laptops
  sony-laptop - Move sony-laptop.txt to Documentation/laptops
  thinkpad-acpi - Move thinkpad-acpi.txt to Documentation/laptops
  Documentation - Create laptops sub-directory
  ACPI: thermal: buildfix for CONFIG_THERMAL=n
  cpuidle: build fix for non-x86
  acer-wmi: Fix backlight on AMW0 (V1) laptops
  tc1100-wmi: Mark as experimental
  ACPI: SBS: Host controller must initialize before SBS.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: extend ricoh_mmc to support Ricoh RL5c476
  at91_mci: use generic GPIO calls
  sdhci: add num index for multi controllers case
  MAINTAINERS: remove non-existant URLs
  mmc: remove sdhci and mmc_spi experimental markers
  mmc: Handle suspend/resume in Ricoh MMC disabler

* git://git.infradead.org/mtd-2.6:
  [MTD] [NAND] cs553x_nand: command line partitioning support

Sony MemoryStick cards are used in many products manufactured by Sony.
They are available both as storage and as IO expansion cards.  Currently,
only MemoryStick Pro storage cards are supported via TI FlashMedia
MemoryStick interface.

[mboton@gmail.com: biuld fix]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Miguel Boton <mboton@gmail.co>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  CC      init/main.o
In file included from include2/asm/uaccess.h:8,
                 from include/linux/poll.h:13,
                 from include/linux/rtc.h:113,
                 from include/linux/efi.h:19,
                 from linux-2.6/init/main.c:43:
include/linux/mm.h:1151:
error: expected declaration specifiers or '...' before 'pgtable_t'
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The pte_fn_t in include/linux/mm.h make it necessary for all architectures
to define a pgtable_t type, even those that do not have an mmu.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: "Oliver Pinter" <oliver.pntr@gmail.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

 - remove non-standard in/out markers
 - use tabs for formatting
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm_cgroup() is exclusively used to test whether an mm's mem_cgroup pointer
is pointing to a specific cgroup.  Instead of returning the pointer, we can
just do the test itself in a new macro:

	vm_match_cgroup(mm, cgroup)

returns non-zero if the mm's mem_cgroup points to cgroup.  Otherwise it
returns zero.
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/hostfs/hostfs_kern.c: In function 'hostfs_show_options':
/home/bunk/linux/kernel-2.6/git/linux-2.6/fs/hostfs/hostfs_kern.c:328: error: dereferencing pointer to incomplete type

We need to include mount.h to get vfsmount.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Reported-by: Adrian Bunk <bunk@stusta.de>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  CC      mm/vmscan.o
In file included from
/home/bunk/linux/kernel-2.6/git/linux-2.6/mm/vmscan.c:44:
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h: In function 'is_swap_pte':
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h:48: error: implicit declaration of function 'pte_none'
/home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/swapops.h:48: error: implicit declaration of function 'pte_present'

Does it ever make sense to ask "is this pte a swap entry?" on a machine
with no MMU?  Presumably this also means it has no ptes too, right?  In
which case, it's better to comment the whole function out.  Then when
someone tries to ask the above meaningless question, they get a compile
error rather than a meaningless answer.
Signed-off-by: Matt Mackall <mpm@selenic.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add support for different number of page table levels dependent
on the highest address used for a process. This will cause a 31 bit
process to use a two level page table instead of the four level page
table that is the default after the pud has been introduced. Likewise
a normal 64 bit process will use three levels instead of four. Only
if a process runs out of the 4 tera bytes which can be addressed with
a three level page table the fourth level is dynamically added. Then
the process can use up to 8 peta byte.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

This patch implements 1K/2K page table pages for s390.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

There are two problems in the vt220 intialization:

o Currently the vt220 console looses early printk events until the
  the vt220 tty is registered.
o console should work if tty_register fails

sclp_vt220_con_init calls __sclp_vt220_init and register_console.
It does not register the driver with the sclp core code via
sclp_register. That results in an sclp_send_mask=0. Therefore,
__sclp_vt220_emit will reject buffers with EIO. Unfortunately
register_console will cause the printk buffer to be sent to the
console and, therefore, every early message gets dropped. The
sclp_send_mask is set later during boot, when sclp_vt220_tty_init
calls sclp_register.

The solution is to move the sclp_register call from sclp_vt220_tty_init
to __sclp_vt220_init. This makes sure that the console is properly
registered with the sclp subsystem before the first log buffer messages
are passed to the vt220 console.

We also adopt the cleanup on error to keep the console alive if
tty_register fails.

Thanks to Peter Oberparleiter and Heiko Carstens for review and ideas
for improvement.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

If qdio establish runs in parallel with a channel error,
ccw_device_start_timeout may not trigger the qdio_timeout_handler.
In this case neither QDIO_IRQ_STATE_ESTABLISHED nor
QDIO_IRQ_STATE_ERR is reached and the following wait_event hangs
forever.
Solution: do not make use of the timeout option with
ccw_device_start, but add a timeout to the following wait_event.
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

With the new space saving spinlock_t and a non-debug configuration
the struct page only has 32 bytes for 31 bit s390. The causes an
overflow in the calculation of VMEM_MAX_PHYS which renders the
kernel unbootable.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Do not start ap poll thread per default to increase perfomance with
z/VM.
Signed-off-by: Felix Beck <felix.beck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The black art of inline assemblies.. The new __ffs_word_loop/
__ffz_word_loop inline assemblies need an early clobber for the
two input/output variables.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

If CONIFIG_LOCALVERSION is set for example to -loop, the following error
message was generated.

dpkg-deb - error: Debian revision (`loop') doesn't contain any digits
dpkg-deb: 1 errors in control file

The patch solves this by adding a numeric revision to package version.
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

To allow flexible configuration of IDE introduce HAVE_IDE.
All archs except arm, um and s390 unconditionally select it.
For arm the actual configuration determine if IDE is supported.

This is a step towards introducing drivers/Kconfig for arm.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Fix bug introduced by my latest fix to the aic7xxx Makefile.
Test build on x86 32 and 64 bit.
Without and with -j (parallel build)
Building firmaware is br0ken with O=... but this
is unrelated to this bug-fix.
Tested-by: Adrian Bunk <bunk@kernel.org>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

modpost: Use warn() for announcing section mismatches, for easy grepping for
warnings in build logs.

Also change an existing call from fprintf() to warn() while we're at it.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

If we cannot determine the symbol then print
(unknown) to hint the reader that we failed to
find the symbol.
This happens with REL relocation records
in arm object files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Add some initial documentation detailing what acer-wmi is, and how to use
it. Update the Kconfig entry with a reference to the documentation.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Also update references to sonypi.txt in Kconfig.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
CC: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>

Also update references to sony-laptop.txt in Kconfig.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
CC: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>

Also update references to thinkpad-acpi.txt in Kconfig.
Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
CC: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>