Don't use printk() where "current_thread_info()" is crap.

Until when we switch to running on init_stack, current_thread_info() evaluates
to crap. Printk uses "current" at times (in detail, &current is evaluated with
CONFIG_DEBUG_SPINLOCK to check the spinlock owner task).

And this leads to random segmentation faults.

Exactly, what happens is that &current = *(current_thread_info()), i.e. round
down $esp and dereference the value. I.e. access the stack below $esp, which
causes SIGSEGV on a VM_GROWSDOWN vma (see arch/i386/mm/fault.c).
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Noticed by Christophe Zimmerman, this explains the slow mouse movement
with 2.6.x kernels.

And checking the 2.4.x drivers/sbus/char/sunmouse.c driver shows we
always used a 5-byte protocol with Sun mice in the past.  I have no
idea how the 3-byte thing got into the 2.6.x driver, but it's surely
wrong.
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Resubmitting after recommendation to use GET_REG32_1() instead of
GET_REG32_LOOP(..., 1).  Retested.  Problem remains fixed.

Prevent tg3_get_regs() from reading reserved and undocumented registers
at RX_CPU_BASE and TX_CPU_BASE offsets which caused hostile behavior
on PCIe platforms.
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As reported by Jules Villard <jvillard@ens-lyon.fr> and some others, the
recent GART aperture start reconfiguration causes problems on some
setups.

What I _think_ might be happening is that the X server is also trying to
muck around with the card memory map and is forcing it back into a wrong
setting that also happens to no longer match what the DRM wants to do
and blows up.  There are bugs all over the place in that code (and still
some bugs in the DRM as well anyway).

This patch attempts to avoid that by using the largest of the 2 values,
which I think will cause it to behave as it used to for you and will
still fix the problem with machines that have an aperture size smaller
than the video memory.
Acked-by: Jules Villard <jvillard@ens-lyon.fr>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The below "jumbo" patch fixes the following problems in MLDv2.

1) Add necessary "ntohs" to recent "pskb_may_pull" check [breaks
        all nonzero source queries on little-endian (!)]

2) Add locking to source filter list [resend of prior patch]

3) fix "mld_marksources()" to
        a) send nothing when all queried sources are excluded
        b) send full exclude report when source queried sources are
                not excluded
        c) don't schedule a timer when there's nothing to report

NOTE: RFC 3810 specifies the source list should be saved and each
  source reported individually as an IS_IN. This is an obvious DOS
  path, requiring the host to store and then multicast as many sources
  as are queried (e.g., millions...). This alternative sends a full, 
  relevant report that's limited to number of sources present on the
  machine.

4) fix "add_grec()" to send empty-source records when it should
        The original check doesn't account for a non-empty source
        list with all sources inactive; the new code keeps that
        short-circuit case, and also generates the group header
        with an empty list if needed.

5) fix mca_crcount decrement to be after add_grec(), which needs
        its original value

These issues (other than item #1 ;-) ) were all found by Yan Zheng,
much thanks!
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the checks are scattered all over and this leads
to inconsistencies and even cases where the check is not made.

Based upon a patch from Kris Katterjohn.
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to release idev->lcok before we call addrconf_dad_stop().
It calls ipv6_addr_del(), which will hold idev->lock.

Bug spotted by Yasuyuki KOZAKAI <yasuyuki.kozakai@toshiba.co.jp>.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Call nf_bridge_put() before allocating a new nf_bridge structure and
potentially overwriting the pointer to a previously allocated one.
This fixes a memory leak which can occur when the bridge topology
allows for an skb to traverse more than one bridge.
Signed-off-by: David Kimdon <david.kimdon@devicescape.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing default of 10 is just way too low.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The oops is characteristic of the underlying device being removed from
visibility before the class device, and sure enough we do device_del()
before transport_unregister() in the scsi_target_reap() routines.  I've
no idea why this is suddenly showing up, since the code has been in
there since that function was first invented.  However, I've confirmed
this fixes Andrew Vasquez's boot oops.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Ho ho ho.

Fix n_r3964 timeouts (hardcoded for 100Hz)

Also the include of <asm/termios.h> in 'n_r3964.h' is unnecessary and
prevents using the header file in any application that has to include
<termios.h> due to duplicate definition of 'struct termio'.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Based on __build_read_lock_const, this looked like a bug.

[ Indeed. Maybe nobody uses this version? Worth fixing up anyway ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixes a compiler error in node_to_first_cpu, __ffs expects unsigned long as
a parameter; instead cpumask_t was being passed.  The macro
node_to_first_cpu was not yet used in x86_64 and ia64 arches, and so we never
hit this.  This patch replaces __ffs with first_cpu macro, similar to other
arches.
Signed-off-by: Alok N Kataria <alokk@calsoftinc.com>
Signed-off-by: Ravikiran G Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Introduced by commit 6003a93e

Fix a memory ordering problem that occurs on IA64. The "store" to q->lock_ptr
in wake_futex() can become visible before wake_up_all() clears the lock in the
futex_q.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Two smp_wmb() statements are missing in the sysv sem code: This could
cause stack corruptions.

The attached patch adds them.
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The COW semantics just do not make any sense especially
with the physically discontiguous I/O mappings possible
here.
Signed-off-by: David S. Miller <davem@davemloft.net>

Two critical bugs were found in forcedeth 0.47:
 - TSO doesn't work.
 - pci_map_single() for the rx buffers is called with size==0.  This bug
   is critical, it causes random memory corruptions on systems with an
   iommu.

Below is a minimal fix for both bugs, for 2.6.15.

TSO will be fixed properly in the next version.  Tested on x86-64.
Signed-Off-By: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[patch 3/3] s390: remove redundant and useless code in qeth

From: Frank Pavlic <pavlic@de.ibm.com>
	- remove redundant and useless code in qeth for
	  procfs operations.
	- update Revision numbers
Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth_main.c |    6 -
 qeth_mpc.c  |    2
 qeth_mpc.h  |    2
 qeth_proc.c |  250 ++++++------------------------------------------------------
 qeth_sys.c  |    4
 qeth_tso.h  |    4
 6 files changed, 38 insertions(+), 230 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[patch 2/3] s390: minor qeth network driver fixes

From: Frank Pavlic <pavlic@de.ibm.com>
	- use netif_carrier_on/off calls to tell network stack
	  link carrier state
	- fix possible kfree on NULL
	- PDU_LEN2 is at offset 0x29 otherwise OSN chpid won't initialize
Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
 qeth_eddp.c |    3 ++-
 qeth_main.c |   17 +++++++----------
 qeth_mpc.h  |    2 +-
 3 files changed, 10 insertions(+), 12 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

[patch 1/3] s390: some minor qeth driver fixes

From: Frank Pavlic <pavlic@de.ibm.com>
	- let's have just one function for both ,input and output queue
	  to check qdio errors
	- add /proc/s390dbf/qeth_qerr entries for outbound processing
	- check removed for layer2 device in qeth_add_multicast_ipv6
	- NULL pointer dereference with bonding and VLAN device fixed
	- minimum length check for portname fixed
Signed-off-by: Frank Pavlic <pavlic@de.ibm.com>

diffstat:
qeth_main.c |   42 +++++++++++++++++++++---------------------
qeth_sys.c  |    6 +++---
2 files changed, 24 insertions(+), 24 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Andy,

libphy has no license tag. Something like the attached (untested!) patch
is needed. Hopefully such a change finds its way into 2.6.15.

filename: /lib/modules/2.6.15-rc5-3-ppc64/kernel/drivers/net/phy/libphy.ko
vermagic:       2.6.15-rc5-3-ppc64 SMP gcc-4.1
depends:
srcversion:     ACC921B5E82701BE1E6F603

 drivers/net/phy/phy_device.c |    4 ++++
 1 files changed, 4 insertions(+)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

Add ID for Symbol LA-4123.  Reported by Tomas Novak <tap@post.cz>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

orinoco_nortel was broken during conversion to iomem API.  Wrong PCI BAR
is used for chipset registers.  Reported by Tomas Novak <tap@post.cz>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

The following patch prevents libata from incorrectly modifying inquiry
VPD pages and command support data from ATAPI devices.  I have tested
the patch with a SATA ATAPI tape drive on an AHCI controller.

Patch is against kernel 2.4.32 with 2.4.32-libata1.patch applied.

Anthony J. Battersby
Cybernetics
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

From: Hiroyuki YAMAMORI <h-yamamo@db3.so-net.ne.jp>

Since regen_count is stored in the public address, we need to reset it
when we start renewing temporary address.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

We need to relesae ifp->lock before we call addrconf_dad_stop(),
which will hold ifp->lock.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's definition is wrong (-1 means "no limit" not 999),
only the Sparc SunOS/Solaris compat code uses it, so
let's just kill it off completely from limits.h and
all referencing code.

Noticed by Ulrich Drepper.
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a Kconfig symbol SPARC that is defined on both the sparc and
sparc64 architectures.

This symbol makes some dependencies more readable.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

gem_remove_one() is called from the __devinit gem_init_one().

Therefore, gem_remove_one() mustn't be __devexit.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>