- 23 Sep, 2009 40 commits
-
-
Ondrej Zary authored
Add IrDA support to ark3116 driver. This makes Gembird UIR-22 USB to IrDA adapter work (vendor ID 0x18ec, device ID 0x3118). This adapter contains ARK3116T USB serial chip and an IrDA transceiver, thus a command like "irattach /dev/ttyUSB0 -s" is needed. All magic numbers were captured using usbsnoop from windows driver that came with the device. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Aric Blumer authored
Some ohci-pxa27x platforms may require OCPM and NOCP in UHCRHDA to be clear, but the existing code was only allowing setting. This patch ensures that these bits are clear if the respective flags are not set. This is particularly important for the PXA3xx family where the documentation says OCPM must be cleared, but it is set after reset. Signed-off-by:
Aric Blumer <aric@sdgsystems.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Anand Gadiyar authored
EHCI: OHCI: Remove unnecessary includes of reboot.h Signed-off-by:
Anand Gadiyar <gadiyar@ti.com> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Michael S. Tsirkin authored
include/linux/usb/audio.h is exported to userspace, so part of this file that is for internal kernel usage need to be guarded with ifdef __KERNEL__. This way make headers_install will stript it out. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Nicolas Ferre authored
At91sam9g45 series has a set of high speed USB interfaces. The host driver is an EHCI with its companion OHCI. OHCI is always handled by ohci-at91.c. This wrapper is just modified to allow IRQ sharing between two controllers. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
-
Nicolas Ferre authored
Add gadget USB drivers for at91sam9g45 series. Those SOC include high speed USB interfaces. The gadget driver is the already available atmel_usba_udc. Signed-off-by:
-
Nicolas Ferre authored
Add host USB High speed driver for at91sam9g45 series. The host driver is an EHCI with its companion OHCI. EHCI is handled by the new ehci-atmel.c whereas the OHCI is always handled by ohci-at91.c. Signed-off-by:
-
Bob Liu authored
Signed-off-by:
Bob Liu <yjfpb04@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warnings: drivers/usb/class/usbtmc.c:466: warning: format '%zu' expects type 'size_t', but argument 4 has type 'u32' drivers/usb/class/usbtmc.c:466: warning: format '%zu' expects type 'size_t', but argument 5 has type 'int' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Guus Sliepen authored
According to the specifications, an instrument should not return more data in a DEV_DEP_MSG_IN urb than requested. However, some instruments can send more than requested. This could cause the kernel to write the extra data past the end of the buffer provided by read(). Fix this by checking that the value of the TranserSize field is not larger than the urb itself and not larger than the size of the userspace buffer. Also correctly decrement the remaining size of the buffer when userspace read()s more than USBTMC_SIZE_IOBUFFER. Signed-off-by:
Guus Sliepen <guus@sliepen.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Lothar Wassmann authored
Signed-off-by:
Lothar Wassmann <LW@KARO-electronics.de> Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Alan Stern authored
This patch (as1269) fixes a bug in the way dummy_hcd handles control URBs. Currently it returns a -EOVERFLOW error if the wLength value in the setup packet is different from the URB's transfer_buffer_length. Other host controller drivers don't do this. There's no reason the two length values have to be equal, and in fact they sometimes aren't -- a driver might set the transfer length to the maxpacket value in order to handle buggy devices that don't respect wLength. This patch simply removes the unnecessary check and error return. Signed-off-by:
-
Alan Stern authored
This patch (as1268) changes the way usbcore handles child devices that undergo a disconnection and reconnection while the parent hub is suspended. Currently, if the child isn't enabled for remote wakeup we leave it alone, figuring that it will go through a reset-resume when somebody tries to use it. However this isn't a good approach if the reason for the disconnection is that the child decided to switch modes or in some other way alter its descriptors. In that case we want to re-enumerate it as soon as possible, not wait until somebody forces a reset-resume. To resolve the issue, this patch treats reconnected suspended child devices as though they had requested a remote wakeup, even if they weren't enabled for it. The mode switch or descriptor change will be detected during the reset part of the reset-resume, and the device will be re-enumerated immediately. The disadvantage of this change is that it will cause autosuspended devices to be resumed when the computer wakes up from a system sleep during which the root hub was reset or lost power. This shouldn't matter much; some people would even argue that autosuspended devices should _always_ be resumed when the system wakes up! Signed-off-by:
"Yang Fei-AFY095" <fei.yang@motorola.com> Signed-off-by:
-
Alan Stern authored
This patch (as1267) changes usb_kick_khubd() and hdev_to_hub() to make them more resilient against situations where a hub device isn't bound to the hub driver. The code assumes that if a root hub was successfully registered then it must be bound to the hub driver. But this assumption can fail if the user manually unbinds the hub driver, or more importantly, if the host controller dies causing usb_set_configuration to fail. To protect against these possibilities, make hdev_to_hub() check that the hub device is configured before dereferencing the active configuration, and make usb_kick_khubd() check that the pointer to the hub's private data structure isn't NULL. Signed-off-by:
-
Oliver Neukum authored
if a subdriver has an additional suspend method, it must be called first to allow the subdriver to return -EBUSY, because the second half cannot be easily undone. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Signed-off-by:
-
Manuel Lauss authored
move both ohci-au1xxx and ehci-au1xxx over to dev_pm_ops. Tested on Au1200. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by:
-
Julia Lawall authored
In each case, the NULL test is not necessary because the function is static and at the only places where it is called, the us argument has already been dereferenced. The semantic patch that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E,E1; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E=E1 when != i if (E == NULL||...) S + i = E->fld; // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Maxin John authored
Spelling correction in Motorola USB Phone driver Changed: * Mororola should be using the CDC ACM USB spec, but instead To: * Motorola should be using the CDC ACM USB spec, but instead Signed-off-by:
Maxin B. John <maxinbjohn@gmail.com> Signed-off-by:
-
Michael Hennerich authored
Platform device support was merged earlier, but support for boards to customize the devflags aspect of the controller was not. We want this on Blackfin systems to control the bus width, but might as well expose all of the fields while we're at it. Signed-off-by:
-
Alek Du authored
The Intel Moorestown EHCI controller supports non-standard HOSTPCx register extension. This register controls the LPM behaviour and controls the behaviour of each USB port. Signed-off-by:
Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by:
Alek Du <alek.du@intel.com> Acked-by:
-
Alek Du authored
The ehci_qh structure merged hw and sw together which is not good: 1. More and more items are being added into ehci_qh, the ehci_qh software part are unnecessary to be allocated in DMA qh_pool. 2. If HCD has local SRAM, the sw part will consume it too, and it won't bring any benefit. 3. For non-cache-coherence system, the entire ehci_qh is uncachable, actually we only need the hw part to be uncacheable. Spliting them will let the sw part to be cacheable. Signed-off-by:
-
Alek Du authored
Basically the io watchdog is only useful for those quirk HCDs. For most good ones, it only brings unnecessary wakeups. At least, I know the Intel EHCI HCDs should turn off the flag. Signed-off-by:
-
Oliver Neukum authored
This patch adds to the usbsevseg driver: - suspend/resume support - reset_resume support - autosuspend using the display's power state to determine idleness Signed-off-by:
Harrison Metzger <harrisonmetz@gmail.com>
-
Oliver Neukum authored
usb: full runtime PM support for idmouse driver - add suspend/resume support - add reset_resume support - add support for autosuspend Signed-off-by:
Andreas Deresch <aderesch@fs.tum.de>
-
Roel Kluin authored
Add missing parentheses Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> CC: Ben Dooks <ben@simtec.co.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Julia Lawall authored
list_entry, which is an alias for container_of, cannot return NULL, as there is no way to add a NULL value to a doubly linked list. A simplified version of the semantic match that findds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S1,S2; position p,p1; @@ *x = list_entry@p(...) ... when != x = E *if@p1 (x == NULL) S1 else S2 // </smpl> Signed-off-by:
-
Oliver Neukum authored
poll() should test for a disconnection of the device. Signed-off-by:
-
Oliver Neukum authored
poll needs to return an error if a device is disconnected - make poll check for device's presence - wake all waiters in disconnect Signed-off-by:
-
Oliver Neukum authored
a class driver should have suspend/resume. This makes sure we don't see a virtual disconnect unnecessarily. Signed-off-by:
-
Oliver Neukum authored
usbtmc will happily complete read/write requests even after disconnect has returned. The fix is to introduce a flag. Signed-off-by:
-
Jiri Slaby authored
There are some unused variables in serial_do_down. Remove them. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Oliver Neukum authored
this adds autosupport usable even in an always online mode. - enables remote wakeup on open - autoresume for sending - timeout based autosuspend if nothing is sent or recieved - autosuspend without remote wakeup support on open/close Signed-off-by:
Zhao Ming <zhao.ming9@zte.com.cn> Signed-off-by:
-
Philipp Zabel authored
This adds very basic otg_transceiver support, with vbus_session and vbus_draw callbacks. Now VBUS sensing can be handled by an external driver which registers the otg_transceiver interface. It also allows gadget drivers to configure the current drawn from VBUS. The UDC driver just passes their requests along to the transceiver driver. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Alan Stern authored
This patch (as1261) reduces the amount of detailed URB information logged by usbfs when the usbfs_snoop parameter is enabled. Currently we don't display the final status value for a completed URB. But we do display the entire data buffer twice: both before submission and after completion. The after-completion display doesn't limit itself to the actual_length value. But since usbmon is readily available in virtually all distributions, there's no reason for usbfs to print out any buffer contents at all! So this patch restricts the information to: userspace buffer pointer, endpoint number, type, and direction, length or actual_length, and timeout value or status. Now everything fits neatly into a single line. Along with those changes, the patch also fixes the snoop output for the REAPURBNDELAY and REAPURBNDELAY32 ioctls. The current version omits the 'N' from the names. Signed-off-by:
-
Alan Stern authored
This patch (as1260) changes the pm_usage_cnt field in struct usb_interface from an int to an atomic_t. This is so that drivers can invoke the usb_autopm_get_interface_async() and usb_autopm_put_interface_async() routines without locking and without fear of corrupting the pm_usage_cnt value. Signed-off-by:
-
Alan Stern authored
This patch (as1258) implements a feature that users have been asking for: It gives programs the ability to "claim" a port on a hub, via a new usbfs ioctl. A device plugged into a "claimed" port will not be touched by the kernel beyond the immediate necessities of initialization and enumeration. In particular, when a device is plugged into a "claimed" port, the kernel will not select and install a configuration. And when a config is installed by usbfs or sysfs, the kernel will not probe any drivers for any of the interfaces. (However the kernel will fetch various string descriptors during enumeration. One could argue that this isn't really necessary, but the strings are exported in sysfs.) The patch does not guarantee exclusive access to these devices; it is still possible for more than one program to open the device file concurrently. Programs are responsible for coordinating access among themselves. A demonstration program showing how to use the new interface can be found in an attachment to http://marc.info/?l=linux-usb&m=124345857431452&w=2 The patch also makes a small simplification to the hub driver, replacing a bunch of more-or-less useless variants of "out of memory" with a single message. Signed-off-by:
-
David Vrabel authored
usb_hcd_endpoint_reset() may be called in atomic context and must not sleep. So make whci-hcd's endpoint_reset() asynchronous. URBs submitted while the reset is in progress will be queued (on the std list) and transfers will resume once the reset is complete. Signed-off-by:
David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Wan ZongShun authored
Add ehci support for w90p910 platform. Signed-off-by:
Wan ZongShun <mcuos.com@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by:
-
Laurent Pinchart authored
Those functions are used only used to fill the set/get members of usb_audio_control. It doesn't make much sense to inline them. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Laurent Pinchart authored
linux/usb/audio.h is a public header file that includes definitions exported to userspace. To avoid namespace clashes, prefix all macro definitions with UAC_. Existing macros and structures prefixed with USB_AC_ and USB_AS_ are renamed for consistency. Signed-off-by:
-
