- 13 Apr, 2010 7 commits
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits) ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock ARM: 6031/1: fix Thumb-2 decompressor ARM: 6029/1: ep93xx: gpio.c: local functions should be static ARM: 6028/1: ARM: add MAINTAINERS for U300 ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c MXC: mach_armadillo5x0: Add USB Host support. ARM mach-mx3: duplicated include ARM mach-mx3: duplicated include imx31: add watchdog device on litekit board. imx3: Add watchdog platform device support MXC: mach-mx31_3ds: add support for freescale mc13783 power management device. MXC: mach-mx31_3ds: Add SPI1 device support. MXC: mach-mx31_3ds: Add support for on board NAND Flash. MXC: mach-mx31_3ds: Update variable names over recent mach name modification. imx31: fix parent clock for rtc i.MX51: remove NFC AXI static mapping i.MX51: determine silicon revision dynamically i.MX51: map TZIC dynamically i.MX51: Use correct clock for gpt ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: make sure the chunk allocator doesn't create zero length chunks Btrfs: fix data enospc check overflow
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Fix possible dq_flags corruption quota: Hide warnings about writes to the filesystem before quota was turned on ext3: symlink must be handled via filesystem specific operation ext2: symlink must be handled via filesystem specific operation
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6: udf: add speciffic ->setattr callback udf: potential integer overflow
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (36 commits) MIPS: Calculate proper ebase value for 64-bit kernels MIPS: Alchemy: DB1200: Remove custom wait implementation MIPS: Big Sur: Make defconfig more useful. MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules MIPS: Sibyte: Fix M3 TLB exception handler workaround. MIPS: BCM63xx: Fix build failure in board_bcm963xx.c MIPS: uasm: Add OR instruction. MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions. MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot. MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback MIPS: BCM63xx: Fix typo in cpu-feature-overrides file. MIPS: BCM63xx: Add support for second uart. MIPS: BCM63xx: Fix double gpio registration. MIPS: BCM63xx: Add DWVS0 board MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards. MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count MIPS: libgcc.h: Checkpatch cleanup MIPS: Loongson-2F: Flush the branch target history in BTB and RAS MIPS: Move signal trampolines off of the stack. MIPS: Preliminary VDSO ...
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux: svcrdma: RDMA support not yet compatible with RPC6
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix typo "numer" -> "number" in alloc.c nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v() nilfs2: fix a wrong type conversion in nilfs_ioctl()
-
- 12 Apr, 2010 33 commits
-
-
Andrew Perepechko authored
dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and atomically for example in mark_dquot_dirty or clear_dquot_dirty. Hence a change done by an atomic operation can be overwritten by a change done by a non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk. Signed-off-by:
Andrew Perepechko <andrew.perepechko@sun.com> Signed-off-by:
Jan Kara <jack@suse.cz>
-
Jan Kara authored
For a root filesystem write to the filesystem before quota is turned on happens regularly and there's no way around it because of writes to syslog, /etc/mtab, and similar. So the warning is rather pointless for ordinary users. It's still useful during development so we just hide the warning behind __DQUOT_PARANOIA config option. Signed-off-by: -
Dmitry Monakhov authored
generic setattr implementation is no longer responsible for quota transfer so synlinks must be handled via ext3_setattr. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Dmitry Monakhov authored
generic setattr implementation is no longer responsible for quota transfer so synlinks must be handled via ext2_setattr. Signed-off-by:
-
David Daney authored
The ebase is relative to CKSEG0 not CAC_BASE. On a 32-bit kernel they are the same thing, for a 64-bit kernel they are not. It happens to kind of work on a 64-bit kernel as they both reference the same physical memory. However since the CPU uses the CKSEG0 base, determining if a J instruction will reach always gives the wrong result unless we use the same number the CPU uses. Signed-off-by:
David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1093/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Manuel Lauss authored
While playing with the out-of-tree MAE driver module, the system would panic after a while in the db1200 custom wait code after wakeup due to a clobbered k0 register being used as target address of a store op. Remove the custom wait implementation and revert back to the Alchemy- recommended implementation already set as default. Signed-off-by:
Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1092/Signed-off-by:
-
Ralf Baechle authored
Signed-off-by: -
Anton Altaparmakov authored
Commit b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (lmo) rsp. 35133692 (kernel.org) break non-GPL modules that use __vmalloc() or any of the vmap(), vm_map_ram(), etc functions on MIPS. All those functions are EXPORT_SYMBOL() so are meant to be allowed to be used by non-GPL kernel modules. These calls all take page protection as an argument which is normally a constant like PAGE_KERNEL. This commit causes all protection constants like PAGE_KERNEL to not be constants and instead to contain the GPL-only symbol _page_cachable_default. This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL modules to fail to link with the complaint that they are trying to use the GPL-only symbol _page_cachable_default... Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc. Signed-off-by:
Anton Altaparmakov <aia21@cantab.net> Cc: Chris Dearman <chris@mips.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1084/Signed-off-by:
-
Ralf Baechle authored
The M3 workaround needs to cmpare the region and VPN2 fields only. Signed-off-by: -
Florian Fainelli authored
Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered in the board_prom_init callback, but it references variables and functions which are declared below. Move the variables and functions above board_prom_init. Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1077/Signed-off-by:
-
Ralf Baechle authored
This is needed for the fix of the M3 workaround. Signed-off-by: -
Ralf Baechle authored
Previously it was unconditionally used on all Sibyte family SOCs. The M3 bug has to be handled in the TLB exception handler which is extremly performance sensitive, so this modification is expected to deliver around 2-3% performance improvment. This is important as required changes to the M3 workaround will make it more costly. Signed-off-by: -
Maxime Bizon authored
To avoid a glitch during GPIO initialisation read GPIO output register values left by the firmware. Signed-off-by:
Maxime Bizon <mbizon@freebox.fr> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/903/Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Maxime Bizon authored
Fix typo: CONFIG_BCMCPU_IS_63xx does not exist; CONFIG_BCM63XX_CPU_63xx is the valid config option. Signed-off-by:
-
Maxime Bizon authored
The BCm63xx SOC has two uarts. Some boards use the second one for bluetooth. This patch changes platform device registration code to handle this. Changes to the UART driver were already merged in 6a2c7eab. Signed-off-by:
-
Maxime Bizon authored
bcm63xx_gpio_init is already called from prom_init to allow board to use them early, so we can remove the unneeded arch_initcall. Signed-off-by:
-
Florian Fainelli authored
The DWVS0 board is a BCM6358-based board with an on-board OHCI controler. Signed-off-by:
Florian Fainelli <florian@openwrt.org> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1015/Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
The number of GPIOs on BCM6338 is 8, while BCM6345 has only 16 GPIOs available. Signed-off-by:
-
Andrea Gelmini authored
arch/mips/lib/libgcc.h:21: ERROR: open brace '{' following union go on the same line Signed-off-by:Andrea Gelmini <andrea.gelmini@gelma.net> To: linux-kernel@vger.kernel.org Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-mips@linux-mips.org Cc: linux-sh@vger.kernel.org Patchwork: http://patchwork.linux-mips.org/patch/1007/Signed-off-by:
-
Wu Zhangjin authored
As per chapter 15 "Errata: Issue of Out-of-order in loongson"[1] to work around the Loongson 2F erratum we need to do: "When switching from user mode to kernel mode, you should flush the branch target history such as BTB and RAS." [1] Chinese version: http://www.loongson.cn/uploadfile/file/200808211 [2] English version of chapter 15: http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=sourceSigned-off-by:
Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: Shinya Kuribayashi <shinya.kuribayashi@necel.com> Patchwork: http://patchwork.linux-mips.org/patch/1066/Signed-off-by:
-
David Daney authored
This is a follow on to the vdso patch. Since all processes now have signal trampolines permanently mapped, we can use those instead of putting the trampoline on the stack and invalidating the corresponding icache across all CPUs. We also get rid of a bunch of ICACHE_REFILLS_WORKAROUND_WAR code. [Ralf: GDB 7.1 which has the necessary modifications to allow backtracing over signal frames will supposedly be released tomorrow. The old signal frame format obsoleted by this patch exists in two variations, for sane processors and for those requiring ICACHE_REFILLS_WORKAROUND_WAR. So there was never a GDB which did support backtracing over signal frames on all MIPS systems. This convinved me this series should be applied and pushed upstream as soon as possible.] Signed-off-by:
-
David Daney authored
This is a preliminary patch to add a vdso to all user processes. Still missing are ELF headers and .eh_frame information. But it is enough to allow us to move signal trampolines off of the stack. Note that emulation of branch delay slots in the FPU emulator still requires the stack. We allocate a single page (the vdso) and write all possible signal trampolines into it. The stack is moved down by one page and the vdso is mapped into this space. Signed-off-by:
-
David Daney authored
Signed-off-by:
-
Andreas Ferber authored
The SSB PCIcore code reused the IO resource fixup code from the original 2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack for doing PCI IO resource configuration back then (the boot loader doesn't configure PCI devices on this platform). However, this code is no longer necessary since the kernel now can do PCI resource management fine all by itself, so remove the old code. When removing the code, it becomes obvious that the mem_offset setting in the PCIcore driver was wrong, however this was masked by the fixup code before, except in a few cases involving yenta_socket. For BCM47xx, the correct offset is 0, and since this is the only device using PCIcore in host mode, the offset can simply be removed unconditionally. Signed-off-by:
Andreas Ferber <af@chaos-agency.de> Signed-off-by:
Michael Buesch <mb@bu3sch.de> Cc: Markus Wigge <markus@cultcom.de> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1070/Signed-off-by:
-
Florian Fainelli authored
On AR7, we already redefine PHYS_OFFSET to match the system specifities, it is however not sufficient when unsing dma_{map,unmap}_single, specifically in the ethernet driver, we must also adjust CAC_ADDR and UNCAC_ADDR for DMA to work correctly. This patch fixes the following issue, seen in cpmac_open: ops[#1]: Cpu 0 $ 0 : 00000000 10008400 a0f5b120 00000000 $ 4 : 94c59000 94270f64 00000020 00000010 $ 8 : 00000010 94103ce0 0000000a 94c03400 $12 : ffffffff 94c03408 94c03410 00000001 $16 : a0f5ba20 00000041 94c592c0 94c59200 $20 : 94c59000 000005ee 00002000 9438c8f0 $24 : 00000010 00000000 $28 : 94fac000 94fadd58 94390000 942724a8 Hi : 00000000 Lo : 00000001 epc : 94272518 cpmac_open+0x208/0x3f8 Not tainted ra : 942724a8 cpmac_open+0x198/0x3f8 Status: 10008403 KERNEL EXL IE Cause : 3080000c BadVA : 00000000 PrId : 00018448 (MIPS 4KEc) Modules linked in: Process ifconfig (pid: 278, threadinfo=94fac000, task=94e79590, tls=00000000) Stack : 7f8da120 2ab05cb0 94c59000 943356f0 00000000 943d0000 94c59000 943356f0 94c59030 943d0000 943c27c0 94fade10 00000000 94fade20 94c59000 9428e5a4 00000000 94c59000 00000041 94289768 94c59000 00000041 00001002 00001043 00000000 9428d810 00000000 94fade10 7f8da4e8 9428e6b8 00000000 7f8da4a8 7f8da4e8 00008914 00000000 942f7f2c 00000000 00000008 00408000 00008913 ... Call Trace: [<94272518>] cpmac_open+0x208/0x3f8 [<9428e5a4>] dev_open+0x164/0x264 [<9428d810>] dev_change_flags+0xd0/0x1bc [<942f7f2c>] devinet_ioctl+0x2d8/0x908 [<942771f8>] sock_ioctl+0x29c/0x2fc [<941a0fb4>] vfs_ioctl+0x2c/0x7c [<941a16ec>] do_vfs_ioctl+0x5dc/0x630 [<941a1790>] sys_ioctl+0x50/0x88 [<94101e10>] stack_done+0x20/0x3c Signed-off-by:peter fuerst <post@pfrst.de> Signed-off-by:
-
Alexander Clouter authored
Seems I trimmed one too many lines in 29ca2d81bd2a62fa86bc9a72ddadcf03d7daf795 (lmo) rsp 7084338e (kernel.org) which led to no functioning Ethernet on my WAG54Gv2. This patch restores the AWOL line. Signed-off-by:
Alexander Clouter <alex@digriz.org.uk> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1065/Signed-off-by:
-
Alexander Clouter authored
Seems in my whitespace cleanup 0f2536082d01448daeced8d9e82c3ba1751fefa3 (lmo) rsp. 8c2961da46abd85a71d20f2b169bf80618e (kernel.org) caused AR7 to no longer get as far as init. Fixed my phat fingering. Signed-off-by:
-
Wu Zhangjin authored
This patch fixes a kernel warning when loading the the loongson2_clock driver: "Feb 25 23:42:27 localhost kernel: [ 4.965000] loongson2_clock: module license 'unspecified' taints kernel." Signed-off-by:
Liu Shiwei <liushiwei@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1045/Signed-off-by:
-
Wu Zhangjin authored
On Lemote 2F CS5536 MSRs are accessed through a index / data register pair. The access sequence must be protected by a spinlock to be atomic. Without this rebooting in fs2f_reboot() may fail. Signed-off-by:
-
Robert P. J. Day authored
Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1008/Signed-off-by:
-
Ralf Baechle authored
kernel/elfcore.c includes <linux/elf.h> which includes the <asm/elf.h>. In <asm/elf.h>, struct pt_regs is declared inside the parameter list of the elf_dump_regs function which causes a kernel build warning. Fixed by adding a forward declaration of struct pt_regs. Signed-off-by:
-
