- 05 Mar, 2008 1 commit
-
-
Mike Christie authored
The host reset callout could be starting to reset the hba at the same time the dpc thread is. This creates lots of problems because they both want to do wierd things with the firmware and interrupts, etc. This patch just has the host reset function fully shutdown the dpc thread before resetting the hba. This patch also moves the setting of the session online bit to fix a potential race with the dpc thread and iscsi recovery thread. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
- 03 Mar, 2008 13 commits
-
-
FUJITA Tomonori authored
drivers/scsi/ibmvscsi/ibmvstgt.c: In function 'ibmvstgt_cmd_done': drivers/scsi/ibmvscsi/ibmvstgt.c:292: error: 'cmd' undeclared (first use in this function) drivers/scsi/ibmvscsi/ibmvstgt.c:292: error: (Each undeclared identifier is reported only once drivers/scsi/ibmvscsi/ibmvstgt.c:292: error: for each function it appears in.) Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by:
-
FUJITA Tomonori authored
scsi_tgt uses REQ_TYPE_BLOCK_PC so scsi_init_io doesn't set the length for us. scsi_tgt needs to do it by itself. Signed-off-by:
-
FUJITA Tomonori authored
The scsi midlayer allocates scsi_cmnd->sense_buffer dynamically so we can't initialize scsi_cmnd (the midlyaer does for us). Signed-off-by:
-
FUJITA Tomonori authored
Before calling __scsi_alloc_queue, scsi_host->shost_gendev.parent must be initialized properly. This patch moves __scsi_alloc_queue after scsi_add_host (like initiator drivers do). Signed-off-by:
-
Randy Dunlap authored
Fix docbook problems in fusion source files. These cause the generated docbook to be incorrect. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Eric Moore <Eric.Moore@lsi.com> Signed-off-by:
-
Randy Dunlap authored
Fix docbook problem in SCSI source files. These cause the generated docbook to be incorrect. Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
The original code would incorrectly hardcode ELS timeout values rather than using the traditional '2 * r_a_tov' value. In some cases, the hardcoded values would be larger than the mailbox-command-timeout and result in a needless BIG_HAMMER (ISP reset), the typical recovery mechanism employed in such cases. The second defect in the original code was in the assignment of the default 'ha->r_a_tov' to twice the traditional value. Correct this by setting the value to 10 seconds. Signed-off-by:
-
Andrew Vasquez authored
For recent ISPs, software must detect OVERRUN conditions by checking the SS_RESIDUAL_OVER bit during CS_COMPLETE handling. Update the driver to perform this check, which is consistent with what earlier firmwares did by explicitly cracking open the FCP_RSP statuses and returning an CS_DATA_OVERRUN. Signed-off-by:
-
Andrew Vasquez authored
There's no point in hitting the RISC with what will most assuredly be an unsucessful reset of the RISC hardware if the initial stop-firmware mailbox command fails with a time-out status. Instead, to avoid what could amount to a lengthy stop-firmware/detect-failure/reset-risc loop, continue with driver unloading and discard the stop-firmware requirement. Signed-off-by:
-
Nick Cheng authored
The fix up from Daniel Drake for replacing GFP_DMA with something more sensible has gone in here: commit 69e562c2 Author: Daniel Drake <dsd@gentoo.org> Date: Wed Feb 20 13:29:05 2008 +0000 [SCSI] arcmsr: fix message allocation add a change log and update the version for this. Signed-off-by:
Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by:
-
FUJITA Tomonori authored
ps3rom does: scsi_for_each_sg(cmd, sgpnt, scsi_sg_count(cmd), k) { kaddr = kmap_atomic(sg_page(sgpnt), KM_IRQ0); We cannot do something like that with the clustering enabled (or we can use scsi_kmap_atomic_sg). Signed-off-by: -
FUJITA Tomonori authored
sg driver rounds up the length in struct scatterlist to be a multiple of 512 in some conditions. So LLDs can't use the data length in a sg list to calculate residual. Instead, the length in struct scsi_cmnd should be used. [Geert: the variable buflen already contains scsi_bufflen(cmd)] Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
- 29 Feb, 2008 1 commit
-
-
Ke Wei authored
The phy sas address is showing wrongly (wrong endianness). Fix up the endian transforms to make this correct. Signed-off-by:
Ke Wei <kewei@marvell.com> Signed-off-by:
-
- 27 Feb, 2008 3 commits
-
-
Boaz Harrosh authored
The recent patch named: [SCSI] gdth: !use_sg cleanup and use of scsi accessors has done a bad job in handling internal commands issued by gdth_execute(). Internal commands are issued with device gdth_cmd_str ready made directly to the card, without any mapping or translations of scsi commands. So here I added a gdth_cmd_str pointer to the gdth_cmndinfo private structure which is then copied directly to host. following this patch is a cleanup that removes the home cooked accessors and reverts them to regular scsi_cmnd accessors. Since they are not used anymore. After review maybe the 2 patches should be squashed together. FIXME: There is still a problem with gdth_get_info(). as reported there is a WARN_ON trigerd in dma_free_coherent() when doing: $ cat /proc/sys/gdth/0 Signed-off-by:
Boaz Harrosh <bharrosh@panasas.com> Tested-by:
Joerg Dorchain: <joerg@dorchain.net> Tested-by:
Stefan Priebe <s.priebe@allied-internet.ag> Tested-by:
Jon Chelton <jchelton@ffpglobal.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by:
-
Boaz Harrosh authored
gdth_exit would first remove all cards then stop the timer and would not sync with the timer function. This caused a crash in gdth_timer() when module was unloaded. So del_timer_sync the timer before we delete the cards. also the reboot notifier function would crash. So clean that up and fix the crashes. Signed-off-by:
-
Mike Christie authored
The old tools did not set max session cmds. This is a regression. I removed the check when merging the power of 2 patch. Signed-off-by:
-
- 24 Feb, 2008 22 commits
-
-
James Bottomley authored
This is a particularly nasty bug. The problem is that if any internal ascb times out, currently we free it even though it's pending at the sequencer. This results in the sequencer getting terminally confused and the error message: BUG:sequencer:dl:no ascb Being returned when it comes back. The way to fix this is to manage freeing the ascb from the tasklet completion routine, so that we only free it when the sequencer actually returns it. The code is also altered to use on stack completions and transfer variables. Signed-off-by: -
James Bottomley authored
- Correct one use after free of the sas task - update the reset required path to move straight to LUN reset - make the bigger hammer actually reset something instead of just trying to clear all the tasks. Signed-off-by: -
James Bottomley authored
Once the phy reset is plumbed in properly, SATA error handling fails nastily because we change the port attached_sas_address using the WWN field of the IDENTIFY message. This is a nice thing to do in theory, but it really destroys hotplug because any event on the port causes an automatic mismatch between the sas_address the phy just picked up and the one we propagate into the port. However ugly they are, we have to stick with the sas addresses made up by the phys and expanders. Also does a few cosmetic changes to the way port printing is done to make it clearer how a port is formed. Signed-off-by: -
James Bottomley authored
Currently aic94xx has no exported I_T_nexus_reset function. This is a bit of a huge problem, since sas_ata relies on this function to perform an ATA phy reset and also it means that if abort fails, we really have no bigger hammer to hit everything with. Plumb in the I_T_nexus_reset by quiescing the sequencer, sending the correct phy reset (link for ATA and hard for SAS) and then carefully resuming the sequencer again. Signed-off-by: -
James Bottomley authored
This is needed by the to be added I_T reset function in aic94xx. It needs to know the local phy so it can send a link or hard reset along the path. Signed-off-by: -
James Bottomley authored
mvsas.c picked up execute permissions. Move it back to being a plane old file. James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: -
Linus Torvalds authored
Oleg Nesterov and others have pointed out that on some architectures, the traditional sequence of set_current_state(TASK_INTERRUPTIBLE); if (CONDITION) return; schedule(); is racy wrt another CPU doing CONDITION = 1; wake_up_process(p); because while set_current_state() has a memory barrier separating setting of the TASK_INTERRUPTIBLE state from reading of the CONDITION variable, there is no such memory barrier on the wakeup side. Now, wake_up_process() does actually take a spinlock before it reads and sets the task state on the waking side, and on x86 (and many other architectures) that spinlock is in fact equivalent to a memory barrier, but that is not generally guaranteed. The write that sets CONDITION could move into the critical region protected by the runqueue spinlock. However, adding a smp_wmb() to before the spinlock should now order the writing of CONDITION wrt the lock itself, which in turn is ordered wrt the accesses within the spinlock (which includes the reading of the old state). This should thus close the race (which probably has never been seen in practice, but since smp_wmb() is a no-op on x86, it's not like this will make anything worse either on the most common architecture where the spinlock already gave the required protection). Acked-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Dmitry Adamushko <dmitry.adamushko@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Garzik authored
- Fix build 'make randconfig' build warning spotted by Toralf Foerster: drivers/scsi/mvsas.c: In function 'mvs_hexdump': drivers/scsi/mvsas.c:715: error: implicit declaration of function 'isalnum' - Remove unneeded prototypes (spotted by hch) Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
(sorry for being offtpoic, but while experts are here...) A "typical" implementation of atomic_add_unless() can return 0 immediately after the first atomic_read() (before doing cmpxchg). In that case it doesn't provide any barrier semantics. See include/asm-ia64/atomic.h as an example. We should either change the implementation, or fix the docs. Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Li Zefan authored
Cgroup requires the subsystem to return negative error code on error in the create method. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
Balbir Singh <balbir@in.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Li Zefan authored
Remove this VM_BUG_ON(), as Balbir stated: We used to have a for loop with !list_empty() as a termination condition and VM_BUG_ON(!pc) is a spill over. With the new loop, VM_BUG_ON(!pc) does not make sense. Signed-off-by:
-
Li Zefan authored
- remove trailing " Bytes"s in the demonstration - remove section 4.4 (feature control_type has been removed) - fix reference section Signed-off-by:
-
Li Zefan authored
Signed-off-by:
Paul Menage <menage@google.com> Signed-off-by:
-
Li Zefan authored
The list head res->tasks gets initialized twice in find_css_set(). Signed-off-by:
-
Li Zefan authored
Cgroup uses unsigned long for subsys bitops, not unsigned long long. Signed-off-by:
-
Li Zefan authored
opts.release_agent is not kfree()ed in all necessary places. Signed-off-by:
-
Li Zefan authored
- replace old name 'cont' with 'cgrp' (Paul Menage did this cleanup for cgroup.c in commit bd89aabc) - remove a duplicate declaration of cgroup_path() Signed-off-by:
-
Li Zefan authored
fix: - comments about need_forkexit_callback - comments about release agent - typo and comment style, etc. Signed-off-by:
-
Li Zefan authored
Misc fixes and updates, make the doc consistent with current cgroup implementation. Signed-off-by:
-
Alexander van Heukelum authored
WARNING: vmlinux.o(.meminit.text+0x649): Section mismatch in reference from the function free_area_init_core() to the function .init.text:setup_usemap() The function __meminit free_area_init_core() references a function __init setup_usemap(). If free_area_init_core is only used by setup_usemap then annotate free_area_init_core with a matching annotation. The warning is covers this stack of functions in mm/page_alloc.c: alloc_bootmem_node must be marked __init. alloc_bootmem_node is used by setup_usemap, if !SPARSEMEM. (usemap_size is only used by setup_usemap, if !SPARSEMEM.) setup_usemap is only used by free_area_init_core. free_area_init_core is only used by free_area_init_node. free_area_init_node is used by: arch/alpha/mm/numa.c: __init paging_init() arch/arm/mm/init.c: __init bootmem_init_node() arch/avr32/mm/init.c: __init paging_init() arch/cris/arch-v10/mm/init.c: __init paging_init() arch/cris/arch-v32/mm/init.c: __init paging_init() arch/m32r/mm/discontig.c: __init zone_sizes_init() arch/m32r/mm/init.c: __init zone_sizes_init() arch/m68k/mm/motorola.c: __init paging_init() arch/m68k/mm/sun3mmu.c: __init paging_init() arch/mips/sgi-ip27/ip27-memory.c: __init paging_init() arch/parisc/mm/init.c: __init paging_init() arch/sparc/mm/srmmu.c: __init srmmu_paging_init() arch/sparc/mm/sun4c.c: __init sun4c_paging_init() arch/sparc64/mm/init.c: __init paging_init() mm/page_alloc.c: __init free_area_init_nodes() mm/page_alloc.c: __init free_area_init() and mm/memory_hotplug.c: hotadd_new_pgdat() hotadd_new_pgdat can not be an __init function, but: It is compiled for MEMORY_HOTPLUG configurations only MEMORY_HOTPLUG depends on SPARSEMEM || X86_64_ACPI_NUMA X86_64_ACPI_NUMA depends on X86_64 ARCH_FLATMEM_ENABLE depends on X86_32 ARCH_DISCONTIGMEM_ENABLE depends on X86_32 So X86_64_ACPI_NUMA implies SPARSEMEM, right? So we can mark the stack of functions __init for !SPARSEMEM, but we must mark them __meminit for SPARSEMEM configurations. This is ok, because then the calls to alloc_bootmem_node are also avoided. Compile-tested on: silly minimal config defconfig x86_32 defconfig x86_64 defconfig x86_64 -HIBERNATION +MEMORY_HOTPLUG Signed-off-by:
Alexander van Heukelum <heukelum@fastmail.fm> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Casey Schaufler authored
Update the Smack LSM to allow the registration of the capability "module" as a secondary LSM. Integrate the new hooks required for file based capabilities. Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Cc: Serge Hallyn <serue@us.ibm.com> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Paul Moore <paul.moore@hp.com> Cc: James Morris <jmorris@namei.org> Signed-off-by:
-
Srinivasa Ds authored
Kprobes makes use of preempt_disable(),preempt_enable_noresched() and these functions inturn call add/sub_preempt_count(). So we need to refuse user from inserting probe in to these functions. This patch disallows user from probing add/sub_preempt_count(). Signed-off-by:
Srinivasa DS <srinivasa@in.ibm.com> Acked-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by:
-
