- 26 Jun, 2006 40 commits
-
-
Christian Trefzer authored
This is a fix for the most annoying problem that remained with neofb: After "setterm -powersave powerdown" the console blanker will disable the backlight after the given timeout expires. If this happens after the lid has been shut, we read "LCD off" from the register and store that in the driver. Once the lid is opened, the backlight turns on, but any key press that would awaken the blanked console will switch the backlight off again. The workaround so far was to use the "display config toggle" Fn key combo - once if no external display is attached, otherwise as often as required to restore the desired display setup. The following patch fixes the issue at least for the LCD-only case, with no external monitor attached. Other display setup permutations are pending further testing, but so far I can guarantee at least no negative change in behaviour, if any at all. Signed-off-by:
Christian Trefzer <ctrefzer@gmx.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Arnaldo Carvalho de Melo authored
Signed-off-by:
Arnaldo Carvalho de Melo <acme@mandriva.com> Acked-by:
"Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Rodolfo Giometti authored
Add power management support [akpm@osdl.org: cleanup] Signed-off-by:
Rodolfo Giometti <giometti@linux.it> Signed-off-by:
-
Antonino A. Daplas authored
CONFIG_FB = m and CONFIG_{BACKLIGHT:LCD}_CLASS_DEVICE = y is possible resulting in link errors. Fix by making backlight and lcd class also depend on FB Signed-off-by: -
Arnaud Patard authored
regs.lcdcon1 was not updated on suspend. The result was a garbaged display on resume. This bug was first noticed by Christer Weinigel. This patch is a modified version of the one he sent to me. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
-
Adrian Bunk authored
This patch removes the following unused EXPORT_SYMBOL's: - fbcvt.c: fb_find_mode_cvt - fbmem.c: fb_con_duit - fbmem.c: fb_new_modelist - macmodes.c: mac_var_to_vmode - modedb.c: fb_delete_videomode - modedb.c: fb_destroy_modelist Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Antonino A. Daplas authored
It's a false positive, but let's suppress it anyway. Signed-off-by:
-
Antonino A. Daplas authored
It's a false positive, but let's suppress it anyway. Signed-off-by:
-
Antonino A. Daplas authored
Coverity Bug 68: Fix dead code Signed-off-by:
-
David Hollister authored
Delay the update of the visible framebuffer console until all other consoles have been initialized in order to avoid losing information. This only seems to be a problem with modules, not with built-in drivers. Signed-off-by:
David Hollister <david.hollister@amd.com> Signed-off-by:
Jordan Crouse <jordan.crouse@amd.com> Signed-off-by:
-
Antonino A. Daplas authored
- As per VESA specs, use the VGA registers to set the palette if the mode is VGA compatible. Otherwise, use the protected mode interface. - Make pmi_setpal default to 1 Signed-off-by:
-
Antonino A. Daplas authored
If the hardware palette cannot be accessed, make vesafb_setcolreg return a nonzero value. Signed-off-by:
-
Dennis Munsie authored
Adds 1366x768 @ 60Hz to drivers/video/modedb.c. Signed-off-by:
Dennis Munsie <dmunsie@cecropia.com> Signed-off-by:
-
Antonino A. Daplas authored
Add support for Geforce 6100 and related chipsets (PCI device id 0x024x) Signed-off-by:
-
Antonino A. Daplas authored
- make firmware edid independent from framebuffer (No need to choose framebuffer just to disable this option - enable this option in X86_64 - check if VBE/DDC function is implemented before calling actual function Signed-off-by:
-
Antonino A. Daplas authored
Whitespace cleanup Signed-off-by:
-
Antonino A. Daplas authored
A static pseudocolor visual with depth less than 4 does exist, so let's not accidentally upscale the depth with this configuration Signed-off-by:
-
Antonino A. Daplas authored
Update platform code to dynamically allocate the platform device Signed-off-by:
-
Antonino A. Daplas authored
Update platform code to dynamically allocate the platform device Signed-off-by:
-
Antonino A. Daplas authored
Update platform code to dynamically allocate the platform device Signed-off-by:
-
Antonino A. Daplas authored
Update platform code to dynamically allocate the platform device Signed-off-by:
-
Antonino A. Daplas authored
Set the appropriate acceleration flags so fbcon can choose the optimal scrolling mode. Signed-off-by:
-
Antonino A. Daplas authored
The drawing functions of atyfb is unecessary syncing the GPU which is affecting performance. Remove the calls, any direct access by fbcon to the framebuffer will always be preceeded by a call to atyfb_sync(). Signed-off-by:
-
Antonino A. Daplas authored
Fix image and color handling in atyfb_cursor() - In the 2-bit scheme of the cursor image, just set the first bit to be always zero (turn off transparency and/or XOR), and just do the masking manually - The cursor color is converted into 32-bit RGBA8888 using struct fb_cmap. Each component in the cmap is u16 in size, so mask the upper 8 bits. Signed-off-by:
-
Antonino A. Daplas authored
nVidia is churning out chipsets like there's no tomorrow. And even though the pci_device_id table now has numerous entries, it is still not guaranteed that all supported devices are included or will be included. Fortunately, nvidiafb has chipset detection logic built in. So, change the contents of the pci_device_id table so it will capture all nVidia devices of the display class. Unsupported chipsets will then be filtered out by nvidiafb's detection logic. Signed-off-by:
-
Antonino A. Daplas authored
The EDID block should specify the display's operating limits (vertical and horizontal sync ranges, and maximum dot clock). If not given by the EDID block, the ranges are extrapolated from the modelist. However, the computation used is only a rough approximation, and the resulting values may not reflect the actual capability of the display. This problem is frequently encountered when the EDID block has a single entry, the single mode entry will fail validation. To prevent this, calculate the values based on the same method used in fb_validate_mode(). Signed-off-by:
-
Adrian Bunk authored
Remove unneeded duplicate #include's of the same header file. In the case of fbmon.c linux/pci.h is now #include'd unconditional, but this should be safe. Signed-off-by:
-
Adrian Bunk authored
We had three (sic) VIDEO_SELECT options: - two in drivers/video/Kconfig - one in drivers/video/console/Kconfig This patch removes the two options in drivers/video/Kconfig and also removes the unneeded usage in drivers/video/sis/sis_main.c . Signed-off-by:
-
Richard Purdie authored
Add backlight intensity control to the LOCOMO lcd/backlight driver using the backlight class and add basic power management support. This is a reimplementation and improvement of patches by John Lenz and Pavel Machek Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Antonino A. Daplas authored
Reported by: Rich (Bugzilla Bug 6417) "if savage driver is used in x.org together with savagefb, it results in seriously garbled and distorted screen - coupled with severe slowdowns." This bug is the result of Xorg unable to handle savagefb altering the hardware which results in X failing to start properly and/or failed console switching. Add savagefb_state_save and savagefb_state_restore. These hooks will only save and restore the extended VGA registers. Standard VGA registers will be left alone. This is enough to make savagefb play nicely with the latest Xorg savage driver, and perhaps with savage DRI. (Transient screen artifacts may appear before X loads and during console switches). (Unfortunately, blanking the screen also leaves Xorg in a blanked state, so I have to unblank the screen before Xorg loads. So I doubt if the transient screen artifacts will be completely invisible but hopefully it will only be for a shorter duration (not much).) [akpm@osdl.org: cleanups] Signed-off-by:
-
Antonino A. Daplas authored
Allocate space for 2 register states: 'current' for the current state of the hardware, and 'saved', to be used for restoring the hardware to a sane state. This is in preparation for the addition of state save and restore hooks to make savagefb work together with the latest Xorg savage driver. Signed-off-by:
-
Tobias Oed authored
Signed-off-by:
Tobias Oed <tobiasoed@hotmail.com> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Tobias Oed authored
The driver pdc202xx_old requires CONFIG_BLK_DEV_IDEDMA, so it's always defined Signed-off-by:
-
Ingo Molnar authored
Michal Piotrowski reported the following validator assert: hdd: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdd: set_drive_speed_status: error=0xb4 { AbortedCommand LastFailedSense=0x0b } ============================ [ BUG: illegal lock usage! ] ---------------------------- illegal {in-hardirq-W} -> {hardirq-on-W} usage. hdparm/1821 [HC0[0]:SC0[0]:HE1:SE1] takes: (ide_lock){++..}, at: [<c0268388>] ide_dump_opcode+0x13/0x9b [...] stack backtrace: [<c0104513>] show_trace+0x1b/0x20 [<c01045f1>] dump_stack+0x1f/0x24 [<c013976c>] print_usage_bug+0x1a5/0x1b1 [<c0139e90>] mark_lock+0x2ca/0x4f7 [<c013aa96>] __lockdep_acquire+0x47e/0xaa4 [<c013b536>] lockdep_acquire+0x67/0x7f [<c030552d>] _spin_lock+0x24/0x32 [<c0268388>] ide_dump_opcode+0x13/0x9b [<c02688b6>] ide_dump_status+0x4a6/0x4cc [<c0267ae6>] ide_config_drive_speed+0x32a/0x33a [<c0262dc5>] piix_tune_chipset+0x2ed/0x2f8 [<c0262e31>] piix_config_drive_xfer_rate+0x61/0xb5 [<c0263a82>] set_using_dma+0x2f/0x60 [<c0263bee>] ide_write_setting+0x4a/0xc3 [<c02647ca>] generic_ide_ioctl+0x8a/0x47f [<f886003a>] idecd_ioctl+0xfd/0x133 [ide_cd] [<c01f1fff>] blkdev_driver_ioctl+0x4b/0x5f [<c01f2783>] blkdev_ioctl+0x770/0x7bd [<c017dc0d>] block_ioctl+0x1f/0x21 [<c0189353>] do_ioctl+0x27/0x6e [<c0189604>] vfs_ioctl+0x26a/0x280 [<c0189667>] sys_ioctl+0x4d/0x7e [<c0305ed2>] sysenter_past_esp+0x63/0xa1 in ide_dump_opcode() takes the ide_lock in an irq-unsafe manner, i.e. this function expects to be called with irqs disabled. But ide_dump_ata[pi]_status() doesnt do that - it enables interrupts specifically. That is a no-no - what guarantees that another IDE port couldnt generate an IDE interrupt while we are dumping this error? The fix is to turn the irq-enabling in these functions into irq-disabling. Signed-off-by:Ingo Molnar <mingo@elte.hu> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Sergei Shtylyov authored
Remove the busproc from pdc202xx_old.c because: - it handles the obsolete HDIO_TRISTATE_HWIF ioctl instead of the modern HDIO_SET_BUSSTATE, so treats its argument wrong; - I don't think that tristating both channels is good idea (probably can't be done otherwise since there seems to be only single bit controlling this). Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by:
-
Sergei Shtylyov authored
The function ide_timing_compute() fails to *actually* take drive's specified minimum PIO/DMA cycle times into account -- when doing this, it calls ide_timing_merge() on the 'struct ide_timing' argument which contains garbage at the moment, and then ultimately destroys the read cycle time by quantizing the ide_timing[] entry, instead of copying from that entry to the argument structure, and only then doing a merge/quantize. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Acked-by:
-
Al Boldi authored
During an STR resume cycle, the ide master disk times-out when there is also a slave present (especially CD). Increasing the timeout in ide-io from 10,000 to 100,000 fixes this problem. Acked-by:
-
Alan Cox authored
This bit us a few kernels ago, and for some reason never made it's way upstream. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=144743 Kernel panic - not syncing: drivers/ide/pci/piix.c:231: spin_lock(drivers/ide/ide.c:c03cef28) already locked by driver/ide/ide-iops.c/1153. Signed-off-by:
Dave Jones <davej@redhat.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Dave Jones <davej@redhat.com> Cc: Jens Axboe <axboe@suse.de> Signed-off-by:
-
Tobias Oed authored
Remove a call to hwif->tuneproc() on the error path of config_chipset_for_dma(), as its single caller (pdc202xx_config_drive_xfer_rate()) will do the call in that case. Signed-off-by:
-
Oleg Nesterov authored
After the previous patch SIGNAL_GROUP_EXIT implies a pending SIGKILL, we can remove this check from copy_process() because we already checked !signal_pending(). Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Signed-off-by:
-
