This should not be needed with new style I2C drivers.
Signed-off-by: Tony Lindgren <tony@atomide.com>

A bunch of little cleanups to twl4030-core.

 - Remove needless header inclusions, symbols, and
   forward declarations.

 - Make coding style more standard.

And shrink the object size a bit.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This updates most of the OMAP drivers which are in mainline to
switch to using the cross-platform GPIO calls instead of the
older OMAP-specific ones.

This is all fairly brainless/obvious stuff.  Probably the
most interesting bit is to observe that the omap-keypad
code seems to now have a portable core that could work with
non-OMAP matrix keypads.  (That would improve with hardware
IRQ debouncing enabled, of course...)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Make the hsmmc driver irq requests say which controller they're
associated with (e.g. "mmc0") so /proc/interrupts is more useful.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Hardware supervised control for clockdomain power state transitions now
enabled in omap3_pm_init(). Also fixed set_pwrdm_state() to allow state
changes between sleep states (i.e. RET<->OFF.)
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch changes gpio "driver" to enable debounce clock for
gpio-bank only when debounce is enabled for some gpio in that bank.

Gpio functional clocks are also renamed in clock tree, gpioX_fck ->
gpioX_dbck.

This patch triggers problem with gpio wake-up and Omap3. Gpios in PER
domain aren't capable to generate wake-up if PER domain is in sleep
state. For this iopad wake-up should be used and needed pad
configuration should be done. Enabling iopad wake-up for gpio pads is
left for bootloader or omap mux configuration in kernel.
Signed-off-by: Jouni Hogander <jouni.hogander@nokia.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix it for ES3.0. Also use ES3.0 now as the default for unknown
future revision, and make the code easier to follow.

Also fixed omap detection for ES2.1 and ES3.0 with a patch from
Tero Kristo.
Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Clean-up i2c-omap
Signed-off-by: Tony Lindgren <tony@atomide.com>

Big MMC init clean up:

- Remove enabled field from slots. It is really intended to mean enabled controller,
  not enabled slot. Some controllers can have multiple multiplexed slots connected
  to the first controller, such as H4 and N8X0.

- Initialize MMC devices dynamically as suggested by Russell King

- Fix omap1 mmc clock instance numbers

- Also attempt to fix massive omap1 MMC breakage caused by patch
  138ab9f8. Remove obviously broken
  MMC configurations for now. MMC is still not working for any
  omap1 boards.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This fixes booting, and is a step toward fixing things properly:

- Make enable_reg u32 instead of u16
- Get rid of VIRTUAL_IO_ADDRESS for clocks
- Use __raw_read/write instead of omap_read/write for clock registers

This patch adds a bunch of compile warnings until omap1 clock
also uses offsets.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Don't use __init but __devinit to define probe function.  A pointer to
omap_mcbsp_probe is passed to the core via platform_driver_register and
so the function must not disappear when the init code is freed.  Using
__init and having HOTPLUG=y the following probably oopses:

	echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/unbind
	echo -n omap-mcbsp.1 > /sys/bus/platform/driver/omap-mcbsp/bind

While at it move the remove function to the .devexit.text section.
Signed-off-by: Uwe Kleine-König <ukleinek@strlen.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Without RX and TX interrupt definitions, the omap_mcbsp_request will
fail on OMAP2430 and OMAP34xx for ports 3-5 since default io_type is
OMAP_MCBSP_IRQ_IO.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Bootloader may let McBSP logic running so make sure that block is idle
before requesting IRQs. Also make sure that TX and RX waitqueues are
initialized before request_irq.
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This reverts commit 3fa3f8c8.

Some regs are offsets for omap2/3.
Signed-off-by: Tony Lindgren <tony@atomide.com>

This got broken because of mismerge from arm-devel.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix compile for twl4030-power
Signed-off-by: Tony Lindgren <tony@atomide.com>

Trivial cleanup patch.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

convert to use ioremap() and __raw_{read/write} friends.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Some changes to omap_wdt.c were lost due to, probably,
mis-merges and developers working separately on
linux-omap and mainline.
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

without this the below error messages were coming continuously

TWL4030 module irq 369 is disabled but can't be masked!
<2>TWL4030 module irq 369 is disabled but can't be masked!
Signed-off-by: Arun C <arunedarath@mistralsolutions.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Overo was omitted from the changes in 74fcfe9c

This patch brings Overo RTC setup into line with the other omap boards
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

For boards with twl4030/tps65950 chips, update board setup code to
provide the appropriate board info.

This should evolve a bunch more over time; right now too much of this
data is globally defined (like IRQ and GPIO numbering).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

More updates preparing for upstream merge of twl4030 driver:

 Basic fixes
   -	twl4030-core becomes a new-style I2C driver
   -	declare and use platform_data structure for that core
   -	stop hard-wiring the irq numbers
   -	check functionality that's really used:  I2C, not SMBus
 Cleanup:
   -	remove needless "client string"
   -	remove some fake "bool" types
   -	include catalog part numbers (TPS659{5,3,2}0)
   -	diagnostics should identify the driver!

To use this, all boards with these chips will need to declare this chip
when they declare their active I2C busses (done in a separate patch).

NOTE:  the TWL4030_IRQ_* symbols still need to vanish, along with other
global resource assignments associated with these chips.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Madhusudhan Chikkature<madhu.cr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add in some missing IRQs for secure peripherals, defined in
OMAP34xx Multimedia High Security Device Silicon Revision 3.0 Security
Addendum Version B (SWPU119B)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch adds the register definitions and clock tree fields required
to wait for the USIM module to come out of idle when the USIM clocks are
enabled.  Register bit definitions are from the 34xx HS Addendum Rev B.
There, the clock is in fact named "USIM_ICLK".
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Simplify omap2_clk_wait_ready() to use the new idlest_bit field in
struct clk, rather than the hunk of conditionals that were there
previously.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

For each OMAP module that has a target IDLEST bit, add the appropriate
bits to the clock tree on both the module interface clock and the appropriate
functional clock.  Add a new clock bit, "WAIT_READY", that indicates that
the clock code must wait for the clock's module to come out of idle after
both the target functional clock and interface clocks are enabled.  Fix
some clock flag comments while there to indicate that clocks marked
as "3430ES2" clocks also are valid for later 3430 revisions.

Several OMAP3xxx clocks must be split into platform-specific variants,
since some early silicon revisions do not have target idle state bits
available. DSS, HSOTGUSB, and SSI clocks are affected.  In the future, it
would be ideal to #ifdef out those clocks for kernels that don't need to
run on 3430ES1 chips to save memory.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Originally when the PRCM register macros were defined, bit shift macros
used a "_SHIFT" suffix, and mask macros used none.  This became a source
of bugs and confusion, as the mask macros were mistakenly used for shift
values.  Gradually, the mask macros have been updated, piece by piece,
to add a "_MASK" suffix on the end to clarify.  This patch applies this
change to the CM_IDLEST_* register bits.

The patch also adds a few bits that were missing, mostly from the 3430ES1
to ES2 revisions.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This patch fixes a few OMAP2xxx CM_IDLEST bits that were incorrectly
marked as being OMAP2xxx-wide, when they were actually 2420-specific.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use the clk->prcm_mod field for all register addresses in struct clk.
Remove all usage of the *_REGADDR() and *_OFFSET() macros from the
clock tree.  This eliminates a set of (__force void __iomem *) casts
and removes all of the OMAP2xxx register address rewriting.  Shrink
the width of the enable_reg/clksel_reg registers to 16 bits, saving 4
bytes per struct clk.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Get rid of void __iomem * usage in omap2_clksel_get_src_field.
Prepend the function name with an underscore to highlight that it is a
static function.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Remove omap2_get_clksel() and just use clk->clksel_reg and
clk->clksel_mask directly.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Convert omap2_wait_clock_ready() to use clk.prcm_mod rather than a
void __iomem *.  This removes some cruft from clock24xx.c and sets
up further cruft removal in a subsequent patch.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Use the newly-added clk.prcm_mod field in omap2_clk_wait_ready(),
removing some internal register arithmetic.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Convert the bare constants in the register arithmetic in
omap2_clk_wait_ready() to use meaningful symbolic names.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Create new static functions to read/write registers used in the struct
clk, _omap2_clk_{read,write}_reg().  A subsequent patch will use these
to ensure the correct register read/write instruction is used, which depends
on whether the clock registers are in the CM, PRM, or SCM.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Annotate each OMAP2xxx real hardware clock controlled by the PRCM with
the PRCM module offset.

A subsequent patch will use this to simplify register addressing in the
struct clk.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add a "prcm_mod" field to the struct clk in OMAP2/3, and annotate each
OMAP2xxx real hardware clock controlled by the PRCM with the PRCM
module offset.  (A subsequent patch will annotate OMAP3 clocks.)

Add flags for this field that allow the registers to
be marked as existing in the PRM, CM, or System Control Module.

A subsequent patch will use this to simplify register addressing in the
struct clk.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>