- 26 Sep, 2007 5 commits
-
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_sis: add missing UDMA5 timing value in sis_66_set_dmamode() sata_sil24: fix IRQ clearing race when PCIX_IRQ_WOC is used
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: hpet: ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFF0 ACPI: CONFIG_ACPI_SLEEP=n power off regression in 2.6.23-rc8 (NOT in rc7) ACPI: suspend: build-fix for CONFIG_SUSPEND=n and CONFIG_HIBERNATION=y
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] WE : Add missing auth compat-ioctl [PATCH] softmac: Fix inability to associate with WEP networks
-
Tejun Heo authored
sis_66_set_dmamode() also handles early UDMA100 (SIS630 ET) but is missing udma timing value for UDMA100. According to sis5513, this should be 0x8000. This caused UDMA100 device to fail on pata_sis till it downgrades to UDMA66 while it works fine on sis5513 at UDMA100. Reported by Adam Blech. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Adam Blech <desaster.area@addcom.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Tejun Heo authored
When PCIX_IRQ_WOC is used, sil24 has an inherent race condition between clearing IRQ pending and reading IRQ status. If IRQ pending is cleared after reading IRQ status, there's possibility of lost IRQ. If IRQ pending is cleared before reading IRQ status, spurious IRQs will occur. sata_sil24 till now cleared IRQ pending after reading IRQ status thus losing IRQs on machines where PCIX_IRQ_WOC was used. Reverse the order and ignore spurious IRQs if PCIX_IRQ_WOC. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
- 25 Sep, 2007 22 commits
-
-
Zhao Yakui authored
If hpet has been initialized before registering hpet driver, the callback function of hpet_resources will return the status code of -EBUSY, which is not defined in the ACPI exception table. So when ACPI checks the status code of callback function, it will report the unknown exception code. So the status code in ACPI is used instead of the generic error code in the ACPI callback function of hpet_resources. For example: -EBUSY is replaced by AE_ALREADY_EXISTS -EINVAL is replaced by AE_NO_MEMORY http://bugzilla.kernel.org/show_bug.cgi?id=8630Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alexey Starikovskiy authored
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
-
Alexey Starikovskiy authored
This fixes compilation with CONFIG_SUSPEND unset and CONFIG_HIBERNATION set (raf. http://marc.info/?l=linux-acpi&m=119055289723895&w=4). Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Len Brown <len.brown@intel.com>
-
Jeff Garzik authored
Merge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] scsi_transport_spi: fix domain validation failure from incorrect width setting
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: appletouch - fix idle reset logic
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Ensure FULL_REGS on exec
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Revert "drivers/net/pcmcia/3c589_cs: fix port configuration switcheroo" sky2: be more selective about FIFO watchdog sky2: FE+ Phy initialization r8169: workaround against ignored TxPoll writes (8168) r8169: correct phy parameters for the 8110SC
-
Rusty Russell authored
The assembly templates for lguest guest patching are in the .init.text section. This means that modules get patched with "cc cc cc cc" or similar junk. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Danny ter Haar authored
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Hemminger authored
Need to null terminate environment. Found by inspection while looking for similar problems to platform uevent bug Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Cliff Wickman authored
The vma_data structure may be shared by vma's from multiple tasks, with no way of knowing which areas are shared or not shared, so release/clear pages only when the refcount (of vma's) goes to zero. Signed-off-by: Cliff Wickman <cpw@sgi.com> Cc: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Evgeniy Dushistov authored
Different types of ufs hold state in different places, to hide complexity of this, there is ufs_get_fs_state, it returns state according to "UFS_SB(sb)->s_flags", but during mount ufs_get_fs_state is called, before setting s_flags, this cause message for ufs types like sun ufs: "fs need fsck", and remount in readonly state. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roland McGrath authored
When PTRACE_O_TRACEEXEC is used, a ptrace call to fetch the registers at the PTRACE_EVENT_EXEC stop (PTRACE_PEEKUSR) will oops in CHECK_FULL_REGS. With recent versions, "gdb --args /bin/sh -c 'exec /bin/true'" and "run" at the (gdb) prompt is sufficient to produce this. I also have written an isolated test case, see https://bugzilla.redhat.com/show_bug.cgi?id=301791#c15. This change fixes the problem by clearing the low bit of pt_regs.trap in start_thread so that FULL_REGS is true again. This is correct since all of the GPRs that "full" refers to are cleared in start_thread. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Jeff Garzik authored
Merge branch 'r8169-for-jeff-20070919' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp
-
Jeff Garzik authored
This reverts commit fadacb1b. The change being reverted made the driver consistent with include/linux/netdevice.h, but then inconsistent with the other PCMCIA ethernet drivers. Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Thomas Rohwer authored
Idle count should only be incremented when touchpad button is not pressed, otherwise reset may happen at a wrong time and touchpad will never report button release event. Signed-off-by: Thomas Rohwer <trohwer@tng.de> Acked-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
-
Stephen Hemminger authored
Be more selective about when to enable the ram buffer watchdog code. It is unnecessary on XL A3 or later revs, and with Yukon FE the buffer is so small (4K) that the watchdog detects false positives. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Stephen Hemminger authored
One more snippet of PHY initialization required for FE+ chips. Discovered in latest sk98lin 10.21.1.3 driver. Please apply to 2.6.23. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Linus Torvalds authored
Getting there...
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] SMTC: Make ack_bad_irq() safe with no IM backstop.
-
git://lost.foo-projects.org/~dwillia2/git/iopLinus Torvalds authored
* 'async-tx-fixes-for-linus' of git://lost.foo-projects.org/~dwillia2/git/iop: raid5: fix 2 bugs in ops_complete_biofill async_tx: fix dma_wait_for_async_tx async_tx: usage documentation and developer notes (v2)
-
- 24 Sep, 2007 6 commits
-
-
Dan Williams authored
1/ ops_complete_biofill tried to avoid calling handle_stripe since all the state necessary to return read completions is available. However the process of determining whether more read requests are pending requires locking the stripe (to block add_stripe_bio from updating dev->toead). ops_complete_biofill can run in tasklet context, so rather than upgrading all the stripe locks from spin_lock to spin_lock_bh this patch just unconditionally reschedules handle_stripe after completing the read request. 2/ ops_complete_biofill needlessly qualified processing R5_Wantfill with dev->toread. The result being that the 'biofill' pending bit is cleared before handling the pending read-completions on dev->read. R5_Wantfill can be unconditionally handled because the 'biofill' pending bit prevents new R5_Wantfill requests from being seen by ops_run_biofill and ops_complete_biofill. Found-by: Yuri Tikhonov <yur@emcraft.com> [neilb@suse.de: simpler fix for bug 1 than moving code] Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Fix dma_wait_for_async_tx to not loop forever in the case where a dependency chain is longer than two entries. This condition will not happen with current in-kernel drivers, but fix it for future drivers. Found-by: Saeed Bishara <saeed.bishara@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Changes in v2: * cleanups from Randy and Shannon Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
-
Ralf Baechle authored
Issue reported and original patch by Kevin Kissel, cleaner (imho) implementation by me. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Takashi Iwai authored
Use seq_file for the proc file read/write of snd-page-alloc module. This automatically fixes bugs in the old proc code. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Fix data corruption triggered by wrong headroom marking order
-
- 23 Sep, 2007 4 commits
-
-
git://git.infradead.org/battery-2.6Linus Torvalds authored
* git://git.infradead.org/battery-2.6: [PATCH] missing null termination in power supply uevent
-
Jack Morgenstein authored
This is an addendum to commit 0e6e7416 ("IB/mlx4: Handle new FW requirement for send request prefetching"). We also need to handle prefetch marking properly for S/G segments, or else the HCA may end up processing S/G segments that are not fully written and end up sending the wrong data. This can actually cause data corruption in practice, especially on systems with relatively slow CPUs (where the HCA is more likely to prefetch while the CPU is in the middle of writing a work request into memory). We write S/G segments in reverse order into the WQE, in order to guarantee that the first dword of all cachelines containing S/G segments is written last (overwriting the headroom invalidation pattern). The entire cacheline will thus contain valid data when the invalidation pattern is overwritten. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
-
Thomas Gleixner authored
In a desparate attempt to fix the suspend/resume problem on Andrews VAIO I added a workaround which enforced the broadcast of the oneshot timer on resume. This was actually resolving the problem on the VAIO but was just a stupid workaround, which was not tackling the root cause: the assignement of lower idle C-States in the ACPI processor_idle code. The cpuidle patches, which utilize the dynamic tick feature and go faster into deeper C-states exposed the problem again. The correct solution is the previous patch, which prevents lower C-states across the suspend/resume. Remove the enforcement code, including the conditional broadcast timer arming, which helped to pamper over the real problem for quite a time. The oneshot broadcast flag for the cpu, which runs the resume code can never be set at the time when this code is executed. It only gets set, when the CPU is entering a lower idle C-State. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Thomas Gleixner authored
device_suspend() calls ACPI suspend functions, which seems to have undesired side effects on lower idle C-states. It took me some time to realize that especially the VAIO BIOSes (both Andrews jinxed UP and my elfstruck SMP one) show this effect. I'm quite sure that other bug reports against suspend/resume about turning the system into a brick have the same root cause. After fishing in the dark for quite some time, I realized that removing the ACPI processor module before suspend (this removes the lower C-state functionality) made the problem disappear. Interestingly enough the propability of having a bricked box is influenced by various factors (interrupts, size of the ram image, ...). Even adding a bunch of printks in the wrong places made the problem go away. The previous periodic tick implementation simply pampered over the problem, which explains why the dyntick / clockevents changes made this more prominent. We avoid complex functionality during the boot process and we have to do the same during suspend/resume. It is a similar scenario and equaly fragile. Add suspend / resume functions to the ACPI processor code and disable the lower idle C-states across suspend/resume. Fall back to the default idle implementation (halt) instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Sep, 2007 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: suspend: consolidate handling of Sx states addendum ACPI: suspend: consolidate handling of Sx states. ACPI: video: remove dmesg spam ACPI: video: _DOS=0 by default to prevent hotkey hang
-
git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds authored
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] fix valid but harmless sparse warning [XFS] fix filestreams on 32-bit boxes
-
Avi Kivity authored
What guest drivers? Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Avi Kivity <avi@qumranet.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-