* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits)
  [MIPS] Make timer interrupt frequency configurable from kconfig.
  [MIPS] Correct HAL2 Kconfig description
  [MIPS] Fix R4K cache macro names
  [MIPS] Add Missing R4K Cache Macros to IP27 & IP32
  [MIPS] Support for the RM9000-based Basler eXcite smart camera platform.
  [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board
  [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors.
  [MIPS] SN: include asm/sn/types.h for nasid_t.
  [MIPS] Random fixes for sb1250
  [MIPS] Fix bcm1480 compile
  [MIPS] Remove support for NEC DDB5476.
  [MIPS] Remove support for NEC DDB5074.
  [MIPS] Cleanup memory managment initialization.
  [MIPS] SN: Declare bridge_pci_ops.
  [MIPS] Remove unused function alloc_pci_controller.
  [MIPS] IP27: Extract pci_ops into separate file.
  [MIPS] IP27: Use symbolic constants instead of magic numbers.
  [MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig.
  [MIPS] IP27: Cleanup N/M mode configuration.
  [MIPS] IP27: Throw away old unused hacks.
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits)
  IB/uverbs: Don't serialize with ib_uverbs_idr_mutex
  IB/mthca: Make all device methods truly reentrant
  IB/mthca: Fix memory leak on modify_qp error paths
  IB/uverbs: Factor out common idr code
  IB/uverbs: Don't decrement usecnt on error paths
  IB/uverbs: Release lock on error path
  IB/cm: Use address handle helpers
  IB/sa: Add ib_init_ah_from_path()
  IB: Add ib_init_ah_from_wc()
  IB/ucm: Get rid of duplicate P_Key parameter
  IB/srp: Factor out common request reset code
  IB/srp: Support SRP rev. 10 targets
  [SCSI] srp.h: Add I/O Class values
  IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool.
  IB/mthca: Fill in max_map_per_fmr device attribute
  IB/ipath: Add client reregister event generation
  IB/mthca: Add client reregister event generation
  IB: Move struct port_info from ipath to <rdma/ib_smi.h>
  IPoIB: Handle client reregister events
  IB: Add client reregister event type
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits)
  [ETHTOOL]: Fix UFO typo
  [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer.
  [SCTP]: Send only 1 window update SACK per message.
  [SCTP]: Don't do CRC32C checksum over loopback.
  [SCTP] Reset rtt_in_progress for the chunk when processing its sack.
  [SCTP]: Reject sctp packets with broadcast addresses.
  [SCTP]: Limit association max_retrans setting in setsockopt.
  [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate.
  [IPV6]: Sum real space for RTAs.
  [IRDA]: Use put_unaligned() in irlmp_do_discovery().
  [BRIDGE]: Add support for NETIF_F_HW_CSUM devices
  [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM
  [TG3]: Convert to non-LLTX
  [TG3]: Remove unnecessary tx_lock
  [TCP]: Add tcp_slow_start_after_idle sysctl.
  [BNX2]: Update version and reldate
  [BNX2]: Use CPU native page size
  [BNX2]: Use compressed firmware
  [BNX2]: Add firmware decompression
  [BNX2]: Allow WoL settings on new 5708 chips
  ...

Manual fixup for conflict in drivers/net/tulip/winbond-840.c

* 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: (25 commits)
  intelfb: fixup clock calculation debugging.
  Removed hard coded EDID buffer size.
  intelfb: use regular modedb table instead of VESA
  intelfb: use firmware EDID for mode database
  Revert "intelfb driver -- use the regular modedb table instead of the VESA"
  intelfb: int option fix
  sync modesetting code with X.org
  intelfb: align with changes from my X driver.
  intelfb driver -- use the regular modedb table instead of the VESA
  Adds support for 256MB aperture on 945 chipsets to the intelfb driver
  intelfb -- uses stride alignment of 64 on the 9xx chipsets.
  intelfb: some cleanups for intelfbhw
  intelfb: fixup pitch calculation like X does
  intelfb: fixup p calculation
  This patch makes a needlessly global struct static.
  intelfb: add i945GM support
  intelfb: fixup whitespace..
  intelfb: add hw cursor support for i9xx
  intelfb: make i915 modeset
  intelfb: add support for i945G
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] alpha-agp warning fix
  [AGPGART] uninorth-agp warning fixes
  [AGPGART] Remove pointless initialisation in intel-agp
  [AGPGART] Remove pointless code from agp_generic_create_gatt_table()

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] sets nforce2 minimum PLL divider to 2.
  [CPUFREQ] Make powernow-k7 work on SMP kernels.
  [CPUFREQ] cpufreq core {d,}printk adjustments
  [CPUFREQ] dprintk adjustments to cpufreq-speedstep-centrino
  [CPUFREQ] dprintk adjustments to cpufreq-nforce2
  [CPUFREQ] Prepare powernow-k8 for future CPUs.
  [CPUFREQ] Make acpi-cpufreq 'sticky'.
  [CPUFREQ] Remove strange No-op from longrun.c
  [CPUFREQ] Remove more freq_table reinitialisations.
  [CPUFREQ] Fix another redundant initialisation in freq_table
  [CPUFREQ] Remove duplicate assignment in freq_table
  [CPUFREQ] CodingStyle nits in cpufreq_stats.c
  [CPUFREQ] Remove duplicate assignment from cpufreq-nforce2
  [CPUFREQ] Remove pointless reinitialisations in acpi-cpufreq
  [CPUFREQ] Remove pointless reinitialisation from powernow-k8
  [CPUFREQ] Remove redundant initialisation from longhaul.
  [CPUFREQ] Clean up longhaul's speed pretty-printer
  [CPUFREQ] Disambiguate loop indexes in powernow-k7
  [CPUFREQ] Typo in powernow-k8

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (166 commits)
  [PATCH] net: au1000_eth: PHY framework conversion
  [PATCH] 3c5zz ethernet: fix section warnings
  [PATCH] smc ethernet: fix section mismatch warnings
  [PATCH] hp ethernet: fix section mismatches
  [PATCH] Section mismatch in drivers/net/ne.o during modpost
  [PATCH] e1000: prevent statistics from getting garbled during reset
  [PATCH] smc911x Kconfig fix
  [PATCH] forcedeth: new device ids
  [PATCH] forcedeth config: version
  [PATCH] forcedeth config: module parameters
  [PATCH] forcedeth config: diagnostics
  [PATCH] forcedeth config: move functions
  [PATCH] forcedeth config: statistics
  [PATCH] forcedeth config: csum
  [PATCH] forcedeth config: wol
  [PATCH] forcedeth config: phy
  [PATCH] forcedeth config: flow control
  [PATCH] forcedeth config: ring sizes
  [PATCH] forcedeth config: tso cleanup
  [DOC] Update bonding documentation with sysfs info
  ...

Trying to suspend/resume with console messages flying all around is
doomed to failure, when the devices that the messages are trying to
go to are being shut down.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

According to the ACPI spec, it should be enabled on return from suspend,
but bugs happen.  Apparently especially on the Apple Intel Macs.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Doing a full ata_busy_sleep() seems to get suspend and resume working
fine on the Apple Mac Mini, at least.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Make HZ configurable.  DECSTATION can select 128/256/1024 HZ, JAZZ can
only select 100 HZ, others can select 100/128/250/256/1000/1024 HZ if
not explicitly specified).  Also remove all mach-xxx/param.h files and
update all defconfigs according to current HZ value.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The current HAL2 Kconfig description indicates it is only used on SGI
Indy systems, however all members of the Indigo2 Family have this sound
card as well.  Plus a minor grammatical fix is included.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Several machines have the R4K cache macro name spelled incorrectly.  Namely,
they have cpu_has_4kcache defined instead of cpu_has_4k_cache.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Keeping in accordance with other machines, IP27 and IP32 lack a few
macros.  IP27 lacks cpu_has_4kex & cpu_has_4k_cache macros while IP32
lacks just the cpu_has_4k_cache macro.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: dmitry pervushin  <dpervushin@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Added support for RM200C machines with big endian firmware
Added support for RM200-C40 (R5000 support)
Signed-off-by: Florian Lohoff <flo@rfc822.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Random improvements for sb1250: Silence compiler warnings, a bugfix for
the profiling code, and a comment typo.
Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Fix compilation for bcm1480, a hpt is only available on sb1250/bcm112x.
Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

As warned several times before.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

As warned several times before.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Historically plat_mem_setup did the entire platform initialization.  This
was rather impractical because it meant plat_mem_setup had to get away
without any kind of memory allocator.  To keep old code from breaking
plat_setup was just renamed to plat_setup and a second platform
initialization hook for anything else was introduced.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Remove unnecessary items from vr41xx/Kconfig.  SYS_HA_CPU_VR41XX has
already been selected by MACH_VR41XX.
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

kern_addr_valid is currently only being used in kmem_ptr_validate which
is making some vague attempt at verfying the validity of an address.
Only IA-64, PARISC and x86-64 actually make some actual effort to verify
the validity of the pointer.  Most architecture definitions of
kern_addr_valid() just define it as 1; the Alpha and CONFIG_DISCONTIGMEM
on i386 and MIPS even as 0; the 0-definition will result in
kmem_ptr_validate always failing which in turn will cause d_validate to
always fail.  d_validate's only two users are smbfs and ncpfs, so the
0 definition ended breaking those ...
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

It's not SN0-specific.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

IP27 configuration isn't the only NUMA system - it just happens to be
the currently only supported MIPS NUMA system.  So move the necessary
options back into the main MIPS Kconfig file.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>