- 05 Oct, 2009 5 commits
-
-
Mike Frysinger authored
commit 0271edd4 upstream. Since early printk only makes sense/works when the serial driver is built into the kernel, disable the option for this driver when it is going to be built as a module. Otherwise we get build failures due to the ifdef handling. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Michal Hocko authored
commit 80938332 upstream. Currently we are not including randomized stack size when calculating mmap_base address in arch_pick_mmap_layout for topdown case. This might cause that mmap_base starts in the stack reserved area because stack is randomized by 1GB for 64b (8MB for 32b) and the minimum gap is 128MB. If the stack really grows down to mmap_base then we can get silent mmap region overwrite by the stack values. Let's include maximum stack randomization size into MIN_GAP which is used as the low bound for the gap in mmap. Signed-off-by:
Michal Hocko <mhocko@suse.cz> LKML-Reference: <1252400515-6866-1-git-send-email-mhocko@suse.cz> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Christian Lamparter authored
commit f7f71173 upstream. This patch adds a new usbid for Zcomax XG-705A to the device table. Reported-by:
Jari Jaakola <jari.jaakola@gmail.com> Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Robert Hancock authored
commit 90950a25 upstream. On a Compaq Presario V3000 laptop (NVIDIA MCP51 chipset), pata_amd selects PIO0 mode for the PATA DVD-RAM drive instead of MWDMA2 which it supports: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2 ata4: nv_mode_filter: 0x39f&0x7001->0x1, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11) ata4.00: configured for PIO0 For some reason, the BIOS-set UDMA configuration returns 0 and the ACPI _GTM reports that UDMA2 and PIO0 are enabled. This causes nv_mode_filter to end up allowing only PIO0 and UDMA0-2. Since the drive doesn't support UDMA we end up using PIO0. Since the controllers should always support PIO4, MWDMA2 and UDMA2 regardless of what cable type is used, let's make sure we don't filter out these modes regardless of what wacky settings the BIOS is using. Signed-off-by:
Robert Hancock <hancockrwd@gmail.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Sheng Yang authored
commit 95eb84a7 upstream QNX update WP bit when paging enabled, which is not covered yet. This one fix QNX boot with EPT. Signed-off-by:
Sheng Yang <sheng@linux.intel.com> Signed-off-by:
Avi Kivity <avi@redhat.com> Signed-off-by:
-
- 24 Sep, 2009 35 commits
-
-
Greg Kroah-Hartman authored
-
Brian King authored
commit 46db2f86 upstream. The SLB can change sizes across a live migration, which was not being handled, resulting in possible machine crashes during migration if migrating to a machine which has a smaller max SLB size than the source machine. Fix this by first reducing the SLB size to the minimum possible value, which is 32, prior to migration. Then during the device tree update which occurs after migration, we make the call to ensure the SLB gets updated. Also add the slb_size to the lparcfg output so that the migration tools can check to make sure the kernel has this capability before allowing migration in scenarios where the SLB size will change. BenH: Fixed #include <asm/mmu-hash64.h> -> <asm/mmu.h> to avoid breaking ppc32 build Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Jean Delvare authored
commit 6b5096e4 upstream. One more form factor for Compaq Evo D510, which needs the same quirk as the other form factors. Apparently there's no hardware monitoring chip on that one, but SPD EEPROMs, so it's still worth unhiding the SMBus. Signed-off-by:
Jean Delvare <khali@linux-fr.org> Tested-by:
Nuzhna Pomoshch <nuzhna_pomoshch@yahoo.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Alexander Duyck authored
commit 6f1186be upstream. This patch adds the most recent additions to the list of 82576 device IDs to the list of devices needing the SR-IOV quirk. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Tejun Heo authored
commit ac8672ea upstream. ata_tf_read_block() has off-by-one error when converting CHS address to LBA. The bug isn't very visible because ata_tf_read_block() is used only when generating sense data for a failed RW command and CHS addressing isn't used too often these days. This problem was spotted by Atsushi Nemoto. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
-
Marcelo Tosatti authored
commit 1444885a upstream. Otherwise its possible to starve the host by programming lapic timer with a very high frequency. Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Avi Kivity authored
commit ee3d29e8 upstream. The jump target should not be sign extened; use an unsigned decode flag. Signed-off-by:
-
Izik Eidus authored
commit 3b80fffe upstream. First check if the list is empty before attempting to look at list entries. Signed-off-by:
Izik Eidus <ieidus@redhat.com> Signed-off-by:
-
Avi Kivity authored
commit c9eaf20f upstream. Absolute jumps use zero extended immediate operands. Signed-off-by:
-
Gleb Natapov authored
commit 5fff7d27 upstream. Don't call adjust_vmx_controls() two times for the same control. It restores options that were dropped earlier. This loses us the cr8 exit control, which causes a massive performance regression Windows x64. Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
-
Jan Kiszka authored
commit 07708c4a upstream. So far unprivileged guest callers running in ring 3 can issue, e.g., MMU hypercalls. Normally, such callers cannot provide any hand-crafted MMU command structure as it has to be passed by its physical address, but they can still crash the guest kernel by passing random addresses. To close the hole, this patch considers hypercalls valid only if issued from guest ring 0. This may still be relaxed on a per-hypercall base in the future once required. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Glauber Costa authored
commit a20316d2 upstream. The use of __pa() to calculate the address of a C-visible symbol is wrong, and can lead to unpredictable results. See arch/x86/include/asm/page.h for details. It should be replaced with __pa_symbol(), that does the correct math here, by taking relocations into account. This ensures the correct wallclock data structure physical address is passed to the hypervisor. Signed-off-by:
Glauber Costa <glommer@redhat.com> Signed-off-by:
-
Avi Kivity authored
commit 0a79b009 upstream. Debug registers may only be accessed from cpl 0. Unfortunately, vmx will code to emulate the instruction even though it was issued from guest userspace, possibly leading to an unexpected trap later. Signed-off-by:
-
Gleb Natapov authored
commit 65a82211 upstream. This bug was introduced by b4a2f5e7. Signed-off-by:
-
Marcelo Tosatti authored
commit 6ba66178 upstream. Commit b8bcfe99 made paravirt pte updates synchronous in interrupt context. Unfortunately the KVM pv mmu code caches the lazy/nonlazy mode internally, so a pte update from interrupt context during a lazy mmu operation can be batched while it should be performed synchronously. https://bugzilla.redhat.com/show_bug.cgi?id=518022 Drop the internal mode variable and use paravirt_get_lazy_mode(), which returns the correct state. Signed-off-by:
-
Nicolas Pitre authored
commit 7929eb9c upstream. Let's suppose a highmem page is kmap'd with kmap(). A pkmap entry is used, the page mapped to it, and the virtual cache is dirtied. Then kunmap() is used which does virtually nothing except for decrementing a usage count. Then, let's suppose the _same_ page gets mapped using kmap_atomic(). It is therefore mapped onto a fixmap entry instead, which has a different virtual address unaware of the dirty cache data for that page sitting in the pkmap mapping. Fortunately it is easy to know if a pkmap mapping still exists for that page and use it directly with kmap_atomic(), thanks to kmap_high_get(). And actual testing with a printk in the added code path shows that this condition is actually met *extremely* frequently. Seems that we've been quite lucky that things have worked so well with highmem so far. Signed-off-by:
Nicolas Pitre <nico@marvell.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Jack Steiner authored
commit fa526d0d upstream. Fix address passed to cpa_flush_range() when changing page attributes from WB to UC. The address (*addr) is modified by __change_page_attr_set_clr(). The result is that the pages being flushed start at the _end_ of the changed range instead of the beginning. This should be considered for 2.6.30-stable and 2.6.31-stable. Signed-off-by:
Jack Steiner <steiner@sgi.com> Acked-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
Tejun Heo authored
commit 6dab62ee upstream. http://bugzilla.kernel.org/show_bug.cgi?id=12542 reports that with the quirk not applied on resume, msi stops working after resuming and mcp78s ahci fails due to IRQ mis-delivery. Apply it on resume too. Signed-off-by:
Nicolas Derive <kalon33@ubuntu.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Jeremy Fitzhardinge authored
commit 1ea0d14e upstream. The Intel Optimization Reference Guide says: In Intel Atom microarchitecture, the address generation unit assumes that the segment base will be 0 by default. Non-zero segment base will cause load and store operations to experience a delay. - If the segment base isn't aligned to a cache line boundary, the max throughput of memory operations is reduced to one [e]very 9 cycles. [...] Assembly/Compiler Coding Rule 15. (H impact, ML generality) For Intel Atom processors, use segments with base set to 0 whenever possible; avoid non-zero segment base address that is not aligned to cache line boundary at all cost. We can't avoid having a non-zero base for the stack-protector segment, but we can make it cache-aligned. Signed-off-by:
Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> LKML-Reference: <4AA01893.6000507@goop.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Roel Kluin authored
commit 005155b1 upstream. For the x86_model to be greater than 6 or less than 12 is logically always true. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Peter Zijlstra authored
commit 506d4bc8 upstream. The current noise computation does: \Sum abs(n_i - avg(n)) * N^-1.5 Which is (afaik) not a regular noise function, and needs the complete sample set available to post-process. Change this to use a regular stddev computation which can be done by keeping a two sums: stddev = sqrt( 1/N (\Sum n_i^2) - avg(n)^2 ) For which we only need to keep \Sum n_i and \Sum n_i^2. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> LKML-Reference: <new-submission> Signed-off-by:
-
Roland Dreier authored
commit fa0681d2 upstream. The current implementation allocates a single host page for EQ context memory, which was OK when we only allocated a few EQs. However, since we now allocate an EQ for each CPU core, this patch removes the hard-coded limit (which we exceed with 4 KB pages and 128 byte EQ context entries with 32 CPUs) and uses the same ICM table code as all other context tables, which ends up simplifying the code quite a bit while fixing the problem. This problem was actually hit in practice on a dual-socket Nehalem box with 16 real hardware threads and sufficiently odd ACPI tables that it shows on boot SMP: Allowing 32 CPUs, 16 hotplug CPUs so num_possible_cpus() ends up 32, and mlx4 ends up creating 33 MSI-X interrupts and 33 EQs. This mlx4 bug means that mlx4 can't even initialize at all on this quite mainstream system. Reported-by:
Eli Cohen <eli@mellanox.co.il> Tested-by:
Christoph Lameter <cl@linux-foundation.org> Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Clemens Ladisch authored
commit f1bc07af upstream. When the volume is changed continuously (e.g., when the user drags a volume slider with the mouse), the driver does lots of I2C writes. Apparently, the sound chip can get confused when we poll the I2C status register too much, and fails to complete a read from it. On the PCI-E models, the PCI-E/PCI bridge gets upset by this and generates a machine check exception. To avoid this, this patch replaces the polling with an unconditional wait that is guaranteed to be long enough. Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Tested-by: Johann Messner <johann.messner at jku.at> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Mark Brown authored
commit 87831cb6 upstream. It's the 8th enum of a zero indexed array. This is why I don't let new drivers use these arrays of enums... Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Sophie Hamilton authored
commit 6148b130 upstream. Fix minimum period size for cs46xx cards. This fixes a problem in the case where neither a period size nor a buffer size is passed to ALSA; this is the case in Audacious, OpenAL, and others. Signed-off-by:
Sophie Hamilton <kernel@theblob.org> Signed-off-by:
-
Zhenyu Wang authored
commit 12126482 upstream. As early pci resume has already restored config for host bridge and graphics device, don't need to restore it again, This removes an original order hack for graphics device restore. This fixed the resume hang issue found by Alan Stern on 845G, caused by extra config restore on graphics device. Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Jens Axboe authored
commit b8a9ae77 upstream. Stacked devices do not. For now, just error out with -EINVAL. Later we could make the limit apply on stacked devices too, for throttling reasons. This fixes 5a54cd13353bb3b88887604e2c980aa01e314309 and should go into 2.6.31 stable as well. Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
Geoff Levand authored
commit bc00351e upstream. A workaround for flash memory I/O errors when the PS3 internal hard disk has not been formatted for OtherOS use. This error condition mainly effects 'Live CD' users who have not formatted the PS3's internal hard disk for OtherOS. Fixes errors similar to these when using the ps3-flash-util or ps3-boot-game-os programs: ps3flash read failed 0x2050000 os_area_header_read: read error: os_area_header: Input/output error main:627: os_area_read_hp error. ERROR: can't change boot flag Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Paul Mackerras authored
commit a6dbf93a upstream. Currently there is a bug where if you use oprofile on a pSeries machine, then use perf_counters, then use oprofile again, oprofile will not work correctly; it will lose the PMU configuration the next time the hypervisor does a partition context switch, and thereafter won't count anything. Maynard Johnson identified the sequence causing the problem: - oprofile setup calls ppc_enable_pmcs(), which calls pseries_lpar_enable_pmcs, which tells the hypervisor that we want to use the PMU, and sets the "PMU in use" flag in the lppaca. This flag tells the hypervisor whether it needs to save and restore the PMU config. - The perf_counter code sets and clears the "PMU in use" flag directly as it context-switches the PMU between tasks, and leaves it clear when it finishes. - oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs, which does nothing because it has already been called. In particular it doesn't set the "PMU in use" flag. This fixes the problem by arranging for ppc_enable_pmcs to always set the "PMU in use" flag. It makes the perf_counter code call ppc_enable_pmcs also rather than calling the lower-level function directly, and removes the setting of the "PMU in use" flag from pseries_lpar_enable_pmcs, since that is now done in its caller. This also removes the declaration of pasemi_enable_pmcs because it isn't defined anywhere. Reported-by:
Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
commit e51ee31e upstream. Michael Ellerman reported stack-frame size warnings being produced for power_check_constraints(), which uses an 8*8 array of u64 and two 8*8 arrays of unsigned long, which are currently allocated on the stack, along with some other smaller variables. These arrays come to 1.5kB on 64-bit or 1kB on 32-bit, which is a bit too much for the stack. This fixes the problem by putting these arrays in the existing per-cpu cpu_hw_counters struct. This is OK because two of the call sites have interrupts disabled already; for the third call site we use get_cpu_var, which disables preemption, so we know we won't get a context switch while we're in power_check_constraints(). Note that power_check_constraints() can be called during context switch but is not called from interrupts. Reported-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Paul Mackerras authored
commit fa289bec upstream. Currently, if a group is created where the group leader is initially disabled but a non-leader member is initially enabled, and then the leader is subsequently enabled some time later, the time_enabled for the non-leader member will reflect the whole time since it was created, not just the time since the leader was enabled. This is incorrect, because all of the members are effectively disabled while the leader is disabled, since none of the members can go on the PMU if the leader can't. Thus we have to update the ->tstamp_enabled for all the enabled group members when a group leader is enabled, so that the time_enabled computation only counts the time since the leader was enabled. Similarly, when disabling a group leader we have to update the time_enabled and time_running for all of the group members. Also, in update_counter_times, we have to treat a counter whose group leader is disabled as being disabled. Reported-by:
Stephane Eranian <eranian@googlemail.com> Signed-off-by:
-
Xiao Guangrong authored
commit b3e62e35 upstream. If we pass a big size data over perf_counter_open() syscall, the kernel will copy this data to a small buffer, it will cause kernel crash. This bug makes the kernel unsafe and non-root local user can trigger it. Signed-off-by:
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
-
Hugh Dickins authored
commit 2195d281 upstream. My 353d5c30 "mm: fix hugetlb bug due to user_shm_unlock call" broke the CONFIG_SYSVIPC !CONFIG_MMU build of both 2.6.31 and 2.6.30.6: "undefined reference to `user_shm_unlock'". gcc didn't understand my comment! so couldn't figure out to optimize away user_shm_unlock() from the error path in the hugetlb-less case, as it does elsewhere. Help it to do so, in a language it understands. Reported-by:
Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Joerg Roedel authored
commit e0faf54e upstream. The amd_iommu_pd_table is indexed by protection domain number and not by device id. So this check is broken and must be removed. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 0d03d59d upstream. Commit b8313b6d ("dm log: remove incorrect field from userspace table output") added a call to strstr() with a single-character "needle" string parameter. Unfortunately some versions of gcc replace such calls to strstr() by calls to strchr() behind our back. This causes linking errors if strchr() is defined as an inline function in <asm/string.h> (e.g. on m68k): | WARNING: "strchr" [drivers/md/dm-log-userspace.ko] undefined! Avoid this by explicitly calling strchr() instead. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
