- 29 Dec, 2008 40 commits
-
-
Devin Heitmueller authored
Fix case where we could end up dereferencing a NULL pointer if dev->vdev or dev->vbi_dev were not set properly. Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Devin Heitmueller authored
Empia switched to a 16-bit addressable eeprom in newer devices. While we could certainly write a routine to read the eeprom, there is nothing of use in there that cannot be accessed through registers, and there is the risk that we could corrupt the eeprom (since a 16-bit read call is interpreted as a write call by 8-bit eeproms). So just be safe and bail out of the function. Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by:
-
Devin Heitmueller authored
Empia moved the location of the GPIO/GPO registers in newer devices. Add the ability to specify the relocated registers (including caching of register contents). Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by:
-
Devin Heitmueller authored
When setting up the device, remember the chip id, so we can control behavior in the future without having to read the register continuously. Signed-off-by:
-
Devin Heitmueller authored
Add a EM28XX_NODECODER option to the list of available decoders. This option becomes important for devices that do not have analog support. Signed-off-by:
-
Devin Heitmueller authored
Remove unused variable from em28xx-audio.c Fix warning for unused "ret" variable Signed-off-by:
-
Devin Heitmueller authored
Add em2874 chip id Add chip id for em2874 to list of known chips Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
video_ioctl2 lacks implementation of those two ioctls: - VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS Adds implementation for those. Signed-off-by: -
Darron Broad authored
This cleans-up MFE attachment for saa-7134 dvb devices. note: MFE is not fully implemented here yet. Signed-off-by:
Darron Broad <darron@kewl.org> Signed-off-by:
-
Darron Broad authored
This cleans-up MFE attachment for these cards plus two cases of potential memory leak on attachment failure. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Laurent Pinchart authored
Failed requests will now generate a one-time warning message instead of the usual "Failed to query..." error, which should be more user-friendly. The driver will also recover automatically from failed GET_MIN/GET_MAX requests when the device is half-broken without requiring the MINMAX quirk (fully broken devices still need the quirk). Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Jean-Francois Moine authored
According to http://bugzilla.kernel.org/show_bug.cgi?id=11997, the driver sn9c102 does not work for this webcam. Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
According to http://bugzilla.kernel.org/show_bug.cgi?id=11920, the driver sn9c102 does not work for this webcam. Signed-off-by:
-
Frederic Cand authored
Signed-off-by:
Frederic Cand <frederic.cand@anevia.com> Signed-off-by:
-
Alexey Klimov authored
Patch adds disabled controls in v4l2_queryctrl struct. Also version of driver corrected. -- Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Alexey Klimov authored
This patch adds support for suspend and resume methods in driver. Without this kradio and gnomeradio crashes during resume. Also .supports_autosuspend in usb_driver struct set equal to 0 to avoid suspending of module if usb_autosuspend enabled. Signed-off-by:
-
Mauro Carvalho Chehab authored
Some recent patches added a few bad whitespaces. Remove that. Signed-off-by: -
Laurent Pinchart authored
The UVC specification does not require frame descriptors to be sorted by bFrameIndex. At least one camera (145f:013e) is known not to sort the descriptors properly, so they need to be sorted during parsing as the driver then accesses them by index. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
This patch fixes the bad picture at low resolution (320x240). Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
This patch - makes unuseful the temporary buffers - and also fixes the bad colors problem. Signed-off-by:
-
Frederic Cand authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
- The scan function must know about empty packets. - Packets starting with 0x80 must not be counted. - Wrong size of the translated frame. Signed-off-by:
-
Jean-Francois Moine authored
- This flag is needed by some subdrivers as tv8532 for start of frame detection. Signed-off-by:
-
Jean-Francois Moine authored
- usb_clear_halt() added in gspca and removed in finepix. Signed-off-by:
-
Hans de Goede authored
- This patch makes sonixb.c strife to different values during autoexposure for sif versus vga sensors. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Igor M. Liplianin authored
Add TerraTec Cinergy S USB support Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Acked-by:
Thorsten Leupold <th86@gmx.de> Signed-off-by:
-
Vincent Pelletier authored
Add support for the following inputs: - radio tuner - composite 1 & 2 (only 1 is physically available, but composite 2 is also advertised by windows driver) - svideo Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Igor M. Liplianin authored
Remove usage core->prev_set_voltage from cx24116 based cards, as it does not make sense for the demod. Signed-off-by:
-
Igor M. Liplianin authored
The card based on stv0299 or stv0288 demodulators. Signed-off-by:
-
Igor M. Liplianin authored
The card based on stv0299 or stv0288 demodulators. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by:
-
