- 26 Apr, 2008 40 commits
-
-
Bartlomiej Zolnierkiewicz authored
* Factor out chipset family detection from init_chipset_sis5513() to sis_find_family(). * Use sis_find_family() in sis5513_init_one() to fail early if the chipset is unsupported. * Keep a local copy sis5513_chipset in sis5513_init_one() and set .udma_mask according to chipset family. * Remove no longer need ->ultra_mask setting from init_hwif_sis5513(). Signed-off-by:Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Bartlomiej Zolnierkiewicz authored
Allocate 'struct it821x_dev' objects for both ports in it821x_init_one(). Fixes potential OOPS in it821x_quirkproc() (uses 'itdev' unconditionally) and other problems ('itdev' is needed for correct operation of the driver). Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Set IDE_HFLAG_SINGLE host flag in qd_probe() for QD6500 and QD6580 with the second port disabled. * Check for IDE_HFLAG_SINGLE in qd6580_port_init_devs() instead of using cached value of QD6580 Control register. * Don't cache QD6580 Control register value in hwif->config_data (bits 8-15) and remove no longer needed QD_CONTROL() macro. * Cache QD65xx base address in hwif->config_data (bits 8-15) instead of hwif->select_data. * Set hwif->config_data in qd_probe() and remove qd_setup() helper. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
qd_select() checks itself whether timings should be reprogrammed so remove superfluous qd_timing_ok() and always use ->selectproc method (rename qd_select() to qd65xx_select() while at it). Signed-off-by: -
Borislav Petkov authored
[bart: ported it over Paolo's patch] Signed-off-by:
Borislav Petkov <petkovbb@gmail.com> Signed-off-by:
-
Paolo Ciarrocchi authored
[bart: md5sum checked] Signed-off-by:
Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by:
-
Paolo Ciarrocchi authored
Before: total: 43 errors, 66 warnings, 2183 lines checked After: total: 0 errors, 36 warnings, 2192 lines checked I didn't (and I don't plan to) fix the warnings: WARNING: line over 80 characters [bart: minor fixes, md5sum checked (modulo s/"ignore = NULL;"/"ignore;"/ fix)] Signed-off-by:
-
Paolo Ciarrocchi authored
Before: total: 34 errors, 14 warnings, 456 lines checked After: total: 0 errors, 8 warnings, 456 lines checked [bart: md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free, only a few WARNING: line over 80 characters are left. Compile tested. [bart: md5sum checked] Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free. Compile tested. [bart: minor fixes, md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free, 2 warnings left. Compile tested. [bart: md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
Fix a lot of errors and warnings. Compile tested. [bart: some fixes, md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
Fix all the errors and a few warnings. Compile tested. [bart: some fixes, md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
Compile tested. [bart: some fixes, md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free. Compile tested. [bart: md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
Lot of errors and warnings removed. Compile tested. [bart: minor fixes, md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error and warning free. Compile tested. [bart: md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free. Compile tested. [bart: minor fixes, md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free. Compile tested. [bart: fix issues noticed by Adrian Bunk & Cyrill Gorcunov, md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free. Compile tested. [bart: md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
About 300 errors and warnings fixed. File is now error free. Compile tested. [bart: minor fixes, md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free, only 1 warning left. Compile tested. [bart: md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error and warning free. Compile tested. [bart: md5sum checked] Signed-off-by:
-
Paolo Ciarrocchi authored
File is now error free. Compile tested. [bart: minor fixes, md5sum checked] Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
All host drivers now either set hwif->mmio or reserve continuous I/O resources so remove no longer needed hwif->straight8 flag and never reached code for 'hwif->straight8 == 0' case. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Sergei suggested that it shouldn't be necessary + it had no effect anyway since ide_id_dma_bug() is called earlier in ide_tune_dma(). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Tell IDE layer to not manage resources by setting hwif->mmio flag and request resources in falconide_init(). * Use request_mem_region() for resources reservation. * Use driver name for resources reservation. v2: * Fix missing printk() parameter. (Noticed by Geert Uytterhoeven) Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michael Schmitz <schmitz@debian.org> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Tell IDE layer to not manage resources by setting hwif->mmio flag and request resources in m8xx_ide_init_ports(). * Use request_mem_region() for resources reservation. * Use driver name for resources reservation. Cc: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Make m8xx_ide_init_ports() return an error value. * Update mpc8xx_ide_probe() to setup/probe only ports for which m8xx_ide_init_ports() succedded. Cc: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Tell IDE layer to not manage resources by setting hwif->mmio flag and request resources in bastide_init(). * Use request_mem_region() for resources reservation. * Use driver name for resources reservation. Cc: Ben Dooks <support@simtec.co.uk> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Tell IDE layer to not manage resources by setting hwif->mmio flag. Cc: Mark Lord <mlord@pobox.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Tell IDE layer to not manage resources by always setting hwif->mmio flag (resources are handled by a platform device). Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: -
Adrian Bunk authored
include/linux/hdsmart.h is not used by the kernel and should therefore be removed. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>, Signed-off-by:
-
Borislav Petkov authored
This removes the internal ide-cd buffer and falls back to read-ahead block layer capabilities. Thorough testing (cd burning, dvd read, raw read) gives with the bufferless mode marginally better performance in addition to simplified code. bufferless: dd: reading `/dev/hdc': Input/output error 6238+0 records in 6238+0 records out 204406784 bytes (204 MB) copied, 259.891 s, 787 kB/s real 4m21.598s user 0m0.014s sys 0m0.744s with the old buffer (2.6.25-rc1): dd: reading `/dev/hdc': Input/output error 6238+0 records in 6238+0 records out 204406784 bytes (204 MB) copied, 262.893 s, 778 kB/s real 4m22.938s user 0m0.009s sys 0m0.771s Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
There are no changes to the resulting drivers/ide/ide-disk.o binary file (md5sum-s after and before the patch match). Acked-by:
-
Bartlomiej Zolnierkiewicz authored
* Factor out common code from proc_idedisk_read_smart_{thresholds,values}() to proc_idedisk_read_smart() helper. * Rename proc_idedisk_read_smart_thresholds() to proc_idedisk_read_st() and proc_idedisk_read_smart_values() to proc_idedisk_read_sv(). There should be no functional changes caused by this patch. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
All modular users have been fixed to not reference ide_hwifs[] directly. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
There should be no functional changes caused by this patch. v2: * Fix comment (noticed by Sergei Shtylyov). v3: * Fix no initalization of idx in some case. (Johann Felix Soden) Cc: Johann Felix Soden <johfel@users.sourceforge.net> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Add IDE_HFLAG_QD_2ND_PORT host flag to indicate the need of skipping first ide_hwifs[] slot for the second port of QD65xx controller. * Handle this new host flag in ide_find_port_slot(). * Convert legacy VLB host drivers to use ide_find_port(). While at it: * Fix couple of printk()-s in qd65xx host driver to not use hwif->name. v2: * Fix qd65xx. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
* Change ide_match_hwif() argument from 'u8 bootable' to 'struct ide_port_info *d'. * Move ide_match_hwif() to ide-probe.c from setup-pci.c and rename it to ide_find_port_slot(). Update some comments while at it. * ide_find_port() can be now just a wrapper for ide_find_port_slot(). There should be no functional changes caused by this patch. Signed-off-by:
-
