- 18 Jul, 2007 40 commits
-
-
Alan Stern authored
This patch (as932) removes the deprecated sysfs .../power/state attribute files. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Kay Sievers authored
This allows the uevent file to handle any type of uevent action to be triggered by userspace instead of just the "add" uevent. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
Jens Axboe authored
Hi, This patch kills the pointless debugfs rmdir() printk() when called on a non-empty directory. blktrace will sometimes have to call it a few times when forcefully ending a trace, which polutes the log with pointless warnings. Rationale: - It's more code to work-around this "problem" in the debugfs users, and you would have to add code to check for empty directories to do so (or assume that debugfs is using simple_ helpers, but that would be a layering violation). - Other rmdir() implementations don't complain about something this silly. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] Initialize phy_mask for both macb devices [AVR32] Fix atomic_add_unless() and atomic_sub_unless() [AVR32] Correct misspelled CONFIG_BLK_DEV_INITRD variable. [AVR32] Fix build error in parse_tag_rdimg() [AVR32] Don't wire up macb0 unless SW6 is in default position [AVR32] Wire up SSC platform device 0 as TX on ATSTK1000 board [AVR32] Add Atmel SSC driver platform device to AT32AP architecture [AVR32] Remove optimization of unaligned word loads [AVR32] Make STK1000 mux settings configurable [AVR32] CPU frequency scaling for AT32AP [AVR32] Split SM device into PM, RTC, WDT and EIC [AVR32] faster avr32 unaligned access
-
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setupLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup: [PATCH] x86: do not recompile boot for each build [x86 setup] Save/restore DS around invocations of INT 10h [x86 setup] VGA: Clear the Protect bit before setting the vertical height [x86 setup] Fix assembly constraints [x86 setup] build/tools.c: fix comment [x86 setup] MAINTAINERS: document x86 setup code git tree
-
Peter Zijlstra authored
The TRACE_IRQS_ON function in iret_exc: calls a C function without ensuring that the segments are set properly. Move the trace function and the enabling of interrupt into the C stub. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roland McGrath authored
The code for LDT segment selectors was not robust in the face of a bogus selector set in %cs via ptrace before the single-step was done. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Haavard Skinnemoen authored
The STK1000 uses pullups on the MDIO lines to the PHY, but they are too weak. This causes the PHY layer to detect PHYs on all possible MII addresses. Mask out all but the correct address to prevent this from happening. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
These functions depend on "result" being initalized to 0, but "result" is not included as an input constraint to the inline assembly block following its initialization, only as an output constraint. Thus gcc thinks it doesn't need to initialize it, so result ends up undefined if the "unless" condition is true. This fixes an oops in sunrpc where the faulty atomics caused rpciod_up() to not start the workqueue as it should. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Robert P. J. Day authored
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
This code is inside an #ifdef with a misspelled config symbol, so it hasn't been used for a long time. Fix it before fixing the config symbol to keep bisection working. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Kristoffer Nyborg Gregertsen authored
If the user wants to sacrifice macb0 for more GPIOs, let him. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Hans-Christian Egtvedt authored
Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Hans-Christian Egtvedt authored
This patch adds register definitions, clocks and IRQs to the platform devices. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
If we let unaligned word loads bypass the generic unaligned handling, gcc may combine it with a swap.b instruction and turn it into a ldwsp instruction, which does not work with unaligned addresses. Revert the optimization to prevent the RNDIS driver from crashing. Hopefully we'll figure something out later (it may be better to do the optimization in gcc.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
David Brownell authored
This adds some STK1002-specific config options covering the jumper settings, so the kernel can automatically be configured to include the relevant devices. One of them replaces the previous internal SW2_DEFAULT setting; SPI config is affected by two of the jumpers; and a fourth one switches between LCD and the second Ethernet connector. (There's more that to be done.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Hans-Christian Egtvedt authored
This patch enables CPU frequency scaling for AT32AP devices. This will enable the CPU to scale between the speed of the high speed bus and the master clock and thus save some power. The patch also adds a parent to cpu_clk and a cpu_clk_set_rate to enable changing the CPU clock divider in a sane way. The driver does not check if the given rate is 0, thus resulting in a div by 0. I think this check should be go into the clk_set_rate framework, and not here. Tested on AT32AP7000/ATSTK1000. Hardware documentation can be found in the AT32AP7000 datasheet. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Split the SM platform device into separate platform devices for PM, RTC, WDT and EIC. This is more correct according to the documentation and allows us to simplify the code a little. Also turn the EIC driver into a real platform driver. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
-
David Brownell authored
Use a more conventional implementation for unaligned access, and include an AT32AP-specific optimization: the CPU will handle unaligned words. The result is always faster and smaller for 8, 16, and 32 bit values. For 64 bit quantities, it's presumably larger. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Sam Ravnborg authored
Keep the arch/i386/boot directory from being rebuilt every time. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
H. Peter Anvin authored
There exists at least one card, Trident TVGA8900CL (BIOS dated 1992/9/8) which clobbers DS when "scrolling in an SVGA text mode of more than 800x600 pixels." Although we are extremely unlikely to run into that situation, it is cheap insurance to save and restore DS, and it only adds a grand total of 50 bytes to the total output. Pointed out by Etienne Lorrain. Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
H. Peter Anvin authored
If the user has asked for the vertical height registers to be recomputed by setting bit 15 in the video mode number, we do so without clearing the Protect bit in the Vertical Retrace Register before setting the Overflow register. As a result, if the VGA BIOS had set the Protect bit, the write to the Overflow register will be dropped, and bits [9:8] of the vertical height will be left unchanged. This is a bug imported from the assembly version of this code. It was pointed out by Etienne Lorrain. Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
H. Peter Anvin authored
Fix incorrect assembly constraints. In particular, fix memory constraints used inside push..pop, which can cause invalid operation since gcc may generate %esp-relative references. Additionally: outl() should have "dN" not "dn". query_mca() shouldn't listen 16/32-bit registers in an 8-bit only context. has_eflag(): the "mask" is only used well after both the stack pointer and the output registers have been touched; this requires the output registers to be earlyclobbers (=&) and the input to exclude memory (so "ri", not "g"). Thanks to Etienne Lorrain and Chuck Ebbert for prompting this review. Cc: Etienne Lorrain <etienne_lorrain@yahoo.fr> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
H. Peter Anvin authored
Correct a comment in arch/i386/boot/build/tools.c; we now build the kernel from only two components instead of three, since the boot sector has been integrated in the setup code. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
H. Peter Anvin authored
Document the existence of a published git tree for the x86 setup code. Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds authored
* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (126 commits) V4L/DVB (5847): Clean up schedule_timeout calls in cpia2 and ivtv code V4L/DVB (5846): Clean up setting state and scheduling timeouts V4L/DVB (5844): ivtv: add high volume debugging flag V4L/DVB (5843): ivtv: fix missing signal_pending check. V4L/DVB (5842): ivtv: Add locking to ensure stream setup is atomic. V4L/DVB (5841): tveeprom: add support for Philips FQ1216LME MK3 tuner. V4L/DVB (5840): fix dst and cx24123: tune() callback changed signess for delay V4L/DVB (5838): dvb-core: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22) V4L/DVB (5837): stv0299: Fix signedness warning (gcc 4.1.1, kernel 2.6.22) V4L/DVB (5836): dvb-ttpci: re-initialize aspect ratio and pan scan after arm crash V4L/DVB (5835): saa7146/dvb-ttpci: Fix signedness warnings (gcc 4.1.1, kernel 2.6.22) V4L/DVB (5834): dvb-core: fix signedness warnings and const stripping V4L/DVB (5832): ir-common: optimize bit extract function V4L/DVB (5831): stradis: use ARRAY_SIZE V4L/DVB (5829): Firmware extract and loading for opera dvb-usb update V4L/DVB (5828): Kconfig: Added GemTek USB radio and removed experimental dependency. V4L/DVB (5826): Usbvision: video mux cleanup V4L/DVB (5825): Alter the tuner type for the WinTV USB UK PAL model. V4L/DVB (5824): Usbvision: Hauppauge WinTV USB SECAM_L fix V4L/DVB (5821): Saa7134: add remote control support for LifeView FlyDVB-S LR300 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: extent macros cleanup Fix compilation with EXT_DEBUG, also fix leXX_to_cpu conversions. ext4: remove extra IS_RDONLY() check ext4: Use is_power_of_2() Use zero_user_page() in ext4 where possible ext4: Remove 65000 subdirectory limit ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields ext4: Add nanosecond timestamps jbd2: Move jbd2-debug file to debugfs jbd2: Fix CONFIG_JBD_DEBUG ifdef to be CONFIG_JBD2_DEBUG ext4: Set the journal JBD2_FEATURE_INCOMPAT_64BIT on large devices ext4: Make extents code sanely handle on-disk corruption ext4: copy i_flags to inode flags on write ext4: Enable extents by default Change on-disk format to support 2^15 uninitialized extents write support for preallocated blocks fallocate support in ext4 sys_fallocate() implementation on i386, x86_64 and powerpc
-
git://git.infradead.org/~dedekind/ubi-2.6Linus Torvalds authored
* 'upstream' of git://git.infradead.org/~dedekind/ubi-2.6: (28 commits) UBI: fix compile warning UBI: fix error handling in erase worker UBI: fix comments UBI: remove unneeded error checks UBI: cleanup usage of try_module_get UBI: fix overflow bug UBI: bugfix in max_sqnum calculation UBI: bugfix in sqnum calculation UBI: fix signed-unsigned multiplication UBI: fix bug in atomic_leb_change() UBI: fix message UBI: fix debugging stuff UBI: bugfix in error path UBI: use is_power_of_2() UBI: fix freeing ubi->vtbl while unloading UBI: fix MAINTAINERS UBI: bugfix in ubi_leb_change() UBI: kill homegrown endian macros UBI: cleanup ioctl handling UBI: error path bugfix ...
-
Robert P. J. Day authored
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Robert P. J. Day authored
Replace assignments to "current->state" with the preferred calls to schedule_timeout_interruptible(). Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Add support for high volume debug messages, allowing them to be turned on selectively. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Starting an MPEG and VBI capture simultaneously caused errors in the VBI setup: this setup was done twice when it should be done only for the first stream that is opened. Added a mutex to prevent this from happening. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
tune() dvb_frontend callback changed delay signess: int (*tune)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, unsigned int mode_flags, - int *delay, + unsigned int *delay, This change caused warnings on cx24123 and dst modules: /home/v4l/master/v4l/cx24123.c:1034: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1782: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1808: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1837: warning: initialization from incompatible pointer type /home/v4l/master/v4l/dst.c:1860: warning: initialization from incompatible pointer type This patch corrects the function prototype on both modules to follow the core change. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Fix signedness warnings (gcc 4.1.1, kernel 2.6.22). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Fix signedness warning (gcc 4.1.1, kernel 2.6.22). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Re-initialize aspect ratio and pan scan after arm crash. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Oliver Endriss authored
Fix signedness warnings (gcc 4.1.1, kernel 2.6.22). Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Trent Piepho authored
Make some pointers const, and then delete some now unnecessary casts, which were the wrong signedness anyway, being used to strip the const from another pointer. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-